laser-based gas analysis Articles

  • City Of North Bay Uses Condition Assessment On Critical Force Main To Implement Asset Management Plan

    On one hand, it may seem like a waste of capital dollars if you perform a pipeline condition assessment and the final analysis turns up no leaks. Alternatively, you can also look at the no-leak report as a good news validation story, especially when using the information to help establish an asset management ...


    By Pure Technologies

  • Optimizing Wind and Solar Power in Africa

    Editor's Note: The following is a news release authored by Julie Chao and issued by Lawrence Berkeley National Laboratory on April 5, 2017 To meet skyrocketing demand for electricity, African countries may have to triple their energy output by 2030. While hydropower and fossil fuel power plants are favored approaches in some quarters, a new assessment by the Department of Energy’s Lawrence ...


    By Smart Grid Observer

  • A Faster and Better FluidScan with Version 5

    Measure water contamination in turbine oils down to 300 ppm The latest version of FluidScan software can detect total water presence as low as 300 ppm in turbine oils.  The method provides an alternative to laboratory tests such as Karl Fischer titration when fast, simple, and reagent-free analysis is needed. In addition to measuring water contamination, the FluidScan ...


    By Spectro Scientific

  • The Internet of Water Is Saving Lives While Battling Pollution

    The Problem A condition known as Legionnaires' disease has made headlines after it killed a dozen people in Flint, Michigan in 2014 and 2015 and sickened hundreds in  ...


    By Griswold Water Systems

  • Advanced gas analysis - on the go

    The field of ambient air analysis - monitoring industrial and other environments for harmful concentrations of gases - has traditionally faced a technology limitations: Would you prefer a complete and reliable tool, which will be bulky, complicated and inconvenient? Or would you like a nice portable one that's simple and lightweight, but unreliable and limited in its capability? Truly complete ...


    By HHCS Handheld USA Inc.

  • SPGAS: Specialty gas analysis software

    About SPGAS SPGAS is a user-friendly, turnkey FTIR software package designed specifically for the analysis of gaseous constituents. While providing all of the control features of a standard FTIR software package for Bomem spectrometers, SPGAS also provides the ability for 24/7/365 operation of the IRGAS analysis package. SPGAS is designed to save spectral files from each day of ...


    By CIC Photonics, Inc.

  • Accuracy and precision analysis of chamber-based nitrous oxide gas flux estimates

    Chamber-based estimates of soil-to-atmosphere nitrous oxide (N2O) gas flux tend to underestimate actual emission rates due to inherently nonlinear time series data. In theory, this limitation can be minimized by adjusting measurement conditions to reduce nonlinearity and/or by using flux-calculation (FC) schemes that account for the so-called 'chamber effect.' The current study utilizes gas ...

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Comprehensive analysis of greenhouse gas emissions in Hungary

    This paper overviews the anthropogenic greenhouse gas emissions in Hungary in the period 1985–95. The emissions have been determined and reported according to the IPCC methodologies. The emissions of greenhouse gases decreased until 1994, basically as a result of the economic recession. Hungary has chosen the yearly average emission level of 1985–87 as the base level. In 1994, greenhouse gas ...


    By Inderscience Publishers

  • New gas calibration method eases TOC analysis

    LAR Process Analysers AG of Berlin,  Germany expanded the range of feaiures of its measuring device QuickTOC, which facilitates the monitoring of ultra pure and cooling water, boiler feed and condensate measurement, and industrial wastewaters. For many years, the Berlin company lias been developing, high quality measuring devices and processes for the TOC analysis of condensates and boiler ...


    By LAR Process Analysers AG

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Thermal Power Gas Turbines Market Analysis to 2020

    RnRMarketResearch.com adds report “Gas Turbines for Thermal Power, 2014 Update – Global Market Size, Average Pricing, Equipment Segmentation and Competitive Landscape Analysis to 2020” to its store.   “Gas Turbines for Thermal Power, 2014 Update Global Market Size, Average Pricing, Equipment Segmentation and Competitive Landscape Analysis ...


  • Optimising Compressed Natural Gas filling stations reservoir pressure based on thermodynamic analysis

    A theoretical analysis has been developed to study the effects various parameters on the Compressed Natural Gas (CNG) filling process and the conditions. The analysis is based on first and second laws of thermodynamics, conservation of mass and the AGA8 Equation of State (EOS). Based on AGA8 EOS and thermodynamics relationships, the required properties of natural gas mixtures have been ...


    By Inderscience Publishers

  • Exergy analysis of gas turbine – solid oxide fuel cell–based combined cycle power plant

    Fuel cell technology is one of the promising systems for cleaner and competitive alternate power generation systems. When the high temperature fuel cells like solid oxide fuel cell and molten carbon fuel cell are integrated with the gas turbines, the total thermal efficiency of the combined cycle can be obtained greater than 60%. In the present work, thermodynamic analysis of SOFC–GT combined ...


    By Inderscience Publishers

  • `Econometric Analysis on Environmental Sustainability of Gas Based Carbon Economy in 21st Century - - Strategies for Managing Environmental Risks for Sustainable Development of Gas Markets”

    Abstract:On account of growing economies world over and population explosions among Asian / South East Asian Nations, global energy consumptions are expected to increase by 59 - 63 per cent, over a period of 30 years, growing from 382 quadrillion British thermal units (Btu) in 2000 to 607 quadrillion Btu – 620 quadrillion Btu in 2030, representing an average annual growth rate of 2.2 per ...

  • Sensitivity analysis in a simulated auto thermal Natural Gas reforming process

    Auto Thermal natural gas Reforming (ATR) is one of the mostly used conventional hydrogen generation technologies by the highly developed countries. ATR reactors do not need any direct or indirect heat exchanger, and that is why they are more compact and so preferable than the other reformers. In this study, a process including reformers, carbon dioxide sequestration and a cryogenic separation ...


    By Inderscience Publishers

  • A review of layer of protection analysis techniques for oil and gas industry

    The paper indicates advantages (and disadvantages) of layer of protection analysis (LOPA) over other methods to support its paramount position among different process safety analysis (PSA) methods in use today. Its simplicity (using order-of-magnitude estimates for all elements that constitute an accident scenario), universality (easy adaptation to particular needs), directness to indicate the ...


    By Inderscience Publishers

  • Optimisation of micro gas turbine by exergy, economic and environmental (3E) analysis

    This research proposes a new method for optimisation of a power generation system based on exergy fuel cost and external social cost of air pollution. A thermodynamic model is provided to estimate the outlet mass flow rates of CO2, CO, NO and NO2 for a gas turbine based on maximising the first and second law efficiencies and minimising the objective function. Results show that inclusion of the ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you