laser particle analyser Articles

  • Seasonal size distributions of suspended solids in a stormwater management pond

    ABSTRACTThree seasonal surveys of suspended solids were carried out in an on-stream stormwater management pond, by means of a submersible laser particle size analyser. Size distributions were measured at up to 17 points in the pond, and water samples collected at the same locations were analysed for primary particles aggregated in flocs. Observed suspended solids were mostly composed of flocs, ...


    By IWA Publishing

  • Functional nanostructures from clusters

    Functional cluster-assembled nanostructures with original structures and properties are prepared using the Low Energy Cluster Beam Deposition method (LECBD). This technique consists in depositing supersonic clusters produced in the gas phase using a combined laser vapourisation-inert gas condensation source. Low energy clusters with typical sizes ranging from ∼1 to a few nm are not fragmented ...


    By Inderscience Publishers

  • Hurricane cyclones to Maximize Milk Proteins Recovery from a Multi stage spray dryer at Arla Foods (92 140m3/h at 65ºC) - case study

    FOREWORD Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System to maximize milk proteins recovery from a multi stage (MSD) Niro spray dryer for Aria Foods in Holstebro, Denmark. Aria Foods is a global dairy company and a co-operative owned by dairy farmers, with production facilities in 13 countries and addicional sales offices in 20 more countries, ...

  • Reaching underground resources

    Accessing critical resources such as geothermal energy and natural gas requires drilling — an expensive, energy-intensive, messy process with today's technology. An MIT team has been looking into a more elegant approach. Instead of grinding rock to bits, they would use a continuous beam of energy to vaporize it and then blow out the tiny particles that form with a high-pressure stream of ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Materials recovery from waste cathode ray tubes (CRTs)

    Executive summary ObjectivesThis is the second interim report of this project being carried out by ICER with support from Glass Technology Services. The project is examining potential markets for waste CRT glass. In this second stage five potential applications have been investigated, three for screen glass which does not contain lead and two for lead-containing funnel glass ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you