leak noise Articles

  • Locating Leaks for Cooling Water Systems

    This article illustrates how to locate leaks on cooling water systems in loud, industrial environments like Nuclear or Coal power generating plants without digging or putting anything inside the pipeline.  Infrared-Energy Pattern Analysis (IR-EPA) works on all pipeline sizes and all pipeline materials because it identifies the water outside the pipeline instead of listening for leak noises ...


    By EnTech Engineering, Inc

  • Tackling Office Noise – The Sound Investment

    Open offices or shared offices can offer great benefits in terms of communication but they can also present challenges. We’ve all had problems with noise in the office - the incessant chatter of your colleagues ruining your concentration; people shouting over you when you are trying to have a conversation on the phone; perhaps even maintenance or construction work going on next door. ...


    By Pulsar Instruments plc

  • Tackling Non-Revenue Water by Identifying Small Leaks

    Small leaks sink big ships – the same can be said for large-diameter pipes in utility networks. While large leaks or ruptures are seen as newsworthy stories accompanied by images of water flowing down the streets; smaller leaks can often be more devastating. Left undetected, they can add up over time, contributing significantly to ...


    By Pure Technologies

  • Case study - Birmingham water works board identifies 26 leaks using advanced inline leak detection

    Service: SmartBall Leak Detection Client: Birmingham Water Works Board Project Date: January 2012 - ongoing Location: Birmingham, Ala Type of Pipeline: Water Transmission Main Diameter: 42-inch (1050mm) Pipe Material: Reinforced Concrete Pipe In early 2012, the Birmingham Water Works Board (BWWB) ran a successful leak detection program on 7.7 miles (12 km) of 42-inch ...


    By Pure Technologies

  • Mancomunidad de la Comarca de Pamplona (MCP) Identifies 4 Leaks Using Inline Leak Detection

    Around the world, leaking water pipelines represent a major resource and financial loss for utilities. It is estimated that in some places, Non-Revenue Water exceeds 50 percent. In terms of financial losses, the World Bank estimates that NRW costs utilities worldwide about US$14 billion annually. By reducing these losses by half in areas with the highest NRW, it is estimated that US$2.9 billion ...


    By Pure Technologies

  • Case study - Aquascope 3 can be used by inexperienced operators to find leaks

    In 2006 the Calgary Water Authority in Canada engaged a British consultancy firm called “Hydrosave” to assist them reduce their leakage from 12% of all water supplied and ILI ratings of 4 – 8 between the different DMAs. The temperature in Calgary gets down to -40 degrees Celcius in the winter and the water board’s staff are fully occupied in winter, however in summer ...


    By Gutermann AG

  • Case Study - Amistad Dam: Scan for Leaks in Earthen Dam

    At the Amistad Dam site an investigation was made with a 56 electrode STING/Swift system to determine the location of leaks which have effectively drained the giant dam of water. As it was not immediately obvious which array type would return the best data three different arrays were recorded on the same electrode layout. The resulting three 2D profiles show both similarities and differences. The ...


    By Advanced Geosciences, Inc.

  • Case study - Germany/Albstadt: How telemetry cuts the cost of leak detection significantly

    Introduction Albstadt is a town located in southwest Germany, about 80km south of Stuttgart. Albstadtwerke are the utility network distribution provider in this region supplying potable water, natural gas and electricity.  In addition to managing and maintaining the local distribution assets in Albstadt, Albstadtwerke operate and maintain two more potable water distribution ...


    By Gutermann AG

  • Is your Plant as tight as you think? Leak Detector for extremely toxic Gases, a Field Test Report

    Leak detection of commodity gases in chemical plants is a day-to-day practice. The sensor technology available for this application is field proven and reliable. No question about it, existing sensors will do the job. However, in plants manufacturing or handling extremely toxic substances, the picture is different. For example, take phosgene. The existing sensor technology for leak detection ...

  • Ask The Noise Doctor: How Long will the Batteries Last in My Optimus Sound Level Meter?

    Do you have questions about your noise measurement instruments that Google or Wikipedia just can’t seem to answer? Ask The Noise Doctor. I’m here to answer your most frequently asked questions. Whether it’s product or application based, I’m up to the challenge. In this article I’ll be covering battery life in the Optimus Sound Level Meter range. A Commonly Asked ...


    By Cirrus Research plc

  • Case study - Successful trunk main correlations in Australia, the land of long pipes

    The Aquasscan TM Successfully locates leaks at distances over 1KM in Sydney. The Gutermann Aquascan TM (Trunk Main) correlator provided a series of high performance correlations in trials performed in Sydney, Australia.  Sydney Water provided a 1.2 KM of 600mm OD Steel trunk main for a series of tests to be performed to evaluate the performance.  The testing was administered ...


    By Gutermann AG

  • Active leakage control in low pressures - It can be done!

    Leakage and PressureWater when leaving the pipe creates an ‘energy’ and it is this energy that is transferred through the water and the pipe wall by the means of acoustic sound. This acoustic sound depending on the material of the pipe work either dissipates over a long distance or is absorbed very quickly into the pipe wall. The effect being that for metallic or hard walled pipes the sound ...


  • Case study - Germany/Eislingen - Permanent leakage monitoring is the fastest way to reduce leakage

    The town of Eislingen in Southern Germany has practiced Active Leakage Control for many years with a team of two equipped with a ground microphone and correlator who drive around in a van searching for leaks. As many of the pipes are one hundred years they had a good success rate often finding leaks. With two hundred and forty kilometers in the network, there is a large area for one team to cover ...


    By Gutermann AG

  • Leakage–pressure relationship and leakage detection in intermittent water distribution systems

    Field investigations were conducted to identify the relationship between leakage rate and pressure in selected areas of the water distribution system of the Holy City of Makkah, Saudi Arabia. Noise correlators were used to detect leaks in areas where the water leakage exceeded 20% of the total water supplied. The leakage rate was found to be related to pressure raised to the nth power. The value ...


    By IWA Publishing

  • Metropolitana milanese reduces water loss on critical steel pipeline

    Assessing the condition of buried water infrastructure can yield a variety of outcomes that are difficult to predict. Sometimes, they even seem random. The common belief that the age of a pipe determines its condition is rarely correct – in many cases, a newer main can be in worse condition than one twice or three times as old. Instead, operational, environmental and installation factors ...


    By Pure Technologies

  • Amistad Dam site

    Summary:At the Amistad Dam site an investigation was made with a 56 electrode STING/Swift system to determine the location of leaks which have effectively drained the giant dam of water. As it was not immediately obvious which array type would return the best data three different arrays were recorded on the same electrode layout. The resulting three 2D profiles show both similarities and ...


    By Advanced Geosciences, Inc.

  • What is an anechoic chamber and how quiet can it be?

    One of the things that we often talk about when we’re running our CPTC (Cirrus Product Training Courses) is how our hearing works and we often end up talking about how, if there’s no ambient sound, we can feel uncomfortable and can become disoriented very quickly. One of the best (or maybe the worst) places to experience this is in ...


    By Cirrus Research plc

  • Case Study - Siemens Industrial Turbomachinery AB

    Problem Two large gas turbines (approximately 25m x 12m x 10m) were installed in an industrial area nearby an office building. The gas turbines generate a tonal noise component at around 2700Hz caused by the inlet channel blades pass frequency. This tone imposes a more stringent noise requirement on the supplier, forcing noise reducing actions being made on the turbine. ...


    By Norsonic AS

  • Case study - Increasing efficiency with permanent leakage monitoring

    Abstract In this paper information from Water Authorities in the USA, Europe, Middle East and Australia that have purchased permanent monitoring leak detection equipment is reviewed and the findings are presented in a structured format that covers the following: Justification for permanent monitoring Evaluating the different product offerings ...


    By Gutermann AG

  • Case study - Filming sound leakages in highly reflective office environment

    Problem A newly built office complex is designed with glass facades between the offices and the hallway. The glass facades include a glass door. Although the glass structures themselves have a sufficient sound reduction value, the sound insulation between office and hallway was measured at 19 dB, which was far below the sound insulation criteria for offices given in the regulations. It ...


    By Norsonic AS

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you