leak pressure testing Articles

  • Leak behaviour in pressurized PVC pipes

    The correct definition of the leak law, i.e. the relationship between the leak outflow, the total head at the leak and other relevant parameters such as the pipe material, can seriously affect the accuracy of the numerical models used for the management of water distribution systems, either if they are used to forecast the leakage reduction by pressure management or to locate and size the leaks ...


    By IWA Publishing

  • Hydrostatic Pressure Test

    A hydrostatic test is performed to determine the integrity and soundness of pressure vessels and piping joints. A decrease in the applied pressure or leakage through the products or joints or plastic deformation or distortion or bulging in the product is indication of inadequate quality of the product under test.   This test method is also termed as Leak testing (based on ...

  • Seek the Leak

    Federal regulations (with stiff penalties) govern how to deal with refrigerant emissions. Of course, installing a good facility refrigerant management plan can keep your organization ...


    By IHS

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Experimental investigation of leak hydraulics

    In recent decades the hydraulics of leaks, i.e. the definition of the relationships linking the hydraulic quantities in pipes with leaks, has received increasing attention. On the one hand, the definition of the relationship between the leak outflow and the relevant parameters – e.g. the leak area and shape, the pressure inside the pipe and outside the leak, and the pipe material ...


    By IWA Publishing

  • Blower Door Pressure Testing, Unvented Attics and Florida Homes

    I recently traveled to theCaribbean on a building science investigation. A large multi-national corporation owns several homes there for local executives. These homes had been plagued with dampness and mold growth problems for several years.  After several attempts to correct these problems, IET was called in, as we had ...

  • EPA studies identify techniques for critical leak testing prior to soil-vapor sampling

    Researchers at EPA’s National Risk Management Research Laboratory (NRMRL) in Ada, OK, are developing quality assurance (QA) measures for soil-gas and sub-slab sampling methods that help differentiate contaminant vapors due to vapor intrusion from background sources. Recent research focused on measures to identify leakage of ambient air into conventional vapor probes, which can significantly ...

  • Case study - Dallas Water Utilities - Leak Detection

    Service: Sahara Leak Detection Client: Dallas Water Utilities (DWU) Department of Public Works Type of Pipeline: Raw Water Transmission Main Diameter: 108-inch Pipe Material: PCCP Length: 7.3 miles The City of Dallas Water Utilities (DALW) currently draws its raw water from six sources: the Elm Fork of the Trinity River and Lakes Ray Roberts, Lewisville, Grapevine, Ray ...


    By Pure Technologies

  • Mancomunidad de la Comarca de Pamplona (MCP) Identifies 4 Leaks Using Inline Leak Detection

    Around the world, leaking water pipelines represent a major resource and financial loss for utilities. It is estimated that in some places, Non-Revenue Water exceeds 50 percent. In terms of financial losses, the World Bank estimates that NRW costs utilities worldwide about US$14 billion annually. By reducing these losses by half in areas with the highest NRW, it is estimated that US$2.9 billion ...


    By Pure Technologies

  • Leak detection by inverse transient analysis in an experimental PVC pipe system

    Leakage reduction in water supply systems and distribution networks has been an increasingly important issue in the water industry since leaks and ruptures result in major physical and economic losses. Hydraulic transient solvers can be used in the system operational diagnosis, namely for leak detection purposes, due to their capability to describe the dynamic behaviour of the systems and to ...


    By IWA Publishing

  • Leak detection by inverse transient analysis in an experimental PVC pipe system

    Leakage reduction in water supply systems and distribution networks has been an increasingly important issue in the water industry since leaks and ruptures result in major physical and economic losses. Hydraulic transient solvers can be used in the system operational diagnosis, namely for leak detection purposes, due to their capability to describe the dynamic behaviour of the systems and to ...


    By IWA Publishing

  • Emergency response and remediation of a petrol leak: petrol filling station

    Project: Emergency Fuel Leak at an Operational Petrol Station Client: Franchised petrol station operator Services: Emergency response/leak management, regulator negotiation, site investigation, remediation and verification Summary: Responsive, pragmatic advice and robust regulator negotiations aided rapid characterisation ...

  • Identifying Leaks from Natural Gas Pipelines at a Safe Distance

    The use of natural gas, of which methane is the principle component, is increasing worldwide. According to the American Petroleum Institute methane meets 24% of U.S. energy demand and heats over 50% of all U.S. households. It also has many industrial uses, such as the manufacture of chemicals like ammonia, methanol, butane, ethane, propane and acetic acid; it is also an ingredient in products as ...

  • Protect your high pressure pump

    There are many opportunities to protect your high pressure pump. The best pump protection is selecting the right pump for the application. The next best pump protection is proper installation. And the easiest pump protection is regular maintenance. Pump Selection Selecting the correct high pressure pump for the application will offer the best pump protection. Trying to get a pump ...


    By Cat Pumps

  • Active leakage control in low pressures - It can be done!

    Leakage and PressureWater when leaving the pipe creates an ‘energy’ and it is this energy that is transferred through the water and the pipe wall by the means of acoustic sound. This acoustic sound depending on the material of the pipe work either dissipates over a long distance or is absorbed very quickly into the pipe wall. The effect being that for metallic or hard walled pipes the sound ...


  • Development of a long duration, free swimming, inline acoustic leak detection inspection tool

    Abstract Acoustic leak detection inspection tools have become a common technique to identify minute pipeline leakage before the leak and the defect producing it can become a larger problem or even a rupture level event. While these inspection tools only identify small ...


    By Pure Technologies

  • Top 8 things to check when maintaining a Pressure Reducing Valve

    Like every other piece of mechanical equipment we use, a control valve does require some maintenance. As budgets are stretched and time is tight, it can be tempting to ignore checking on valves that are often located in underground vaults and give years of operation without complaint, but eventually like everything else, they will fail. This article looks at 8 simple steps that if undertaken ...


    By Singer Valve Inc.

  • Investigation of flashing-induced instabilities at CIRCUS test facility with the code ATHLET

    The test facility CIRCUS (CIRculation Under Start-up) was built to study the start-up phase of a natural-circulation BWR. During the start-up,so-called flashing-induced instabilities can arise. These instabilities are induced by flashing (i.e., steam production in adiabatic conditions) of the coolant in the long riser section, which is placed above the core to enhance the flow rate. The flashing ...


    By Inderscience Publishers

  • Mobile Stationary Source Emissions Testing, Coming to a Facility Near You?

    Last week, Antea Group had the unique opportunity to perform a RATA (relative accuracy test audit) of the emissions from a thermal oxidizer at an ethanol production facility located in Minnesota using a state-of-the-art mobile testing laboratory. During this RATA audit, actual stack emissions levels (including NOx, SOx, CO2, CO, O2, flow rate, temperature, velocity and pressure) from the ...


    By Antea Group - USA

  • Water vapour permeation testing of food packaging at Campden BRI, Research and Technology Organisation

    Based in the UK, Campden BRI provide the food and drinks industry worldwide with the research, technical and advisory services essential to ensure product quality and safety, process efficiency and innovation. The research centre is a continuous source of knowledge for industry, meeting frequently with its thirteen member interest groups and associated industrial working parties. Contract ...


    By Systech Instruments Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you