lel gas monitoring Articles

  • Monitoring flammable gas in boiler houses

    The most common fuels in use for space and water heating are Oil, Natural Gas and Liquid Petroleum Gas (LPG). By far the most popular, clean and cost effective solutions are utilising Natural Gas or LPG. The traditional safety measure derived from the time of oil fired boiler houses is the use of a fusible link placed above the each boiler. The fusible link is intended to melt if it becomes ...

  • Paint booths, or areas using combustible gases: why a requirement for combustible gas monitor might be necessary

    Paint booths save time and ensure a smooth and professional application of paint in a range of industries, including automotive, aerospace, home decor, furniture, and more. Combustible gases and fluids in the paint booth environment can pose a health hazard if something goes wrong. Explore the hidden dangers of paint booth fluids and gases, and learn how a ...

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Gas safety in confined spaces

    A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and ...

  • Gas Safety in Confined Spaces

    Introduction A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and brewing, as ...

  • Understanding the Benefits of Fixed Gas Detection

    "Fixed gas detection is an essential method of ensuring maximum protection for personnel and plant. There are a variety of technologies available for a multitude of applications. Understanding fixed gas detection is the first step in providing safety." What is fixed gas detection? Fixed gas detection is installed with the aim of providing continuous, area and personnel protection. ...


    By a1-cbiss

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Pt. 3 - IN the MIX - Construction Safety and Gas Detection

    In our last blog (part 2 of 4) we consulted the OSHA Construction eTOOL to determine the factors that require a Gas Monitor. In this Blog (part 3 of 4) we explore Certified AIR ...


  • IR Gas Detector Provides Rapid Response

    The advanced Model IR400 Point IR Combustible Gas Detector from General Monitors features an industry-leading three-second T90 response time to the presence of combustible hydrocarbon-based gases, which allows plant operators to respond quickly to gas leaks and ...


    By General Monitors

  • Pt. 1 - IN the MIX - Construction Safety and Gas Detection

    This is part one in a 4 part series to be posted over the next 4 weeks. "Pointers for Construction Safety & Health compliance" Rob Sant Technical Products Manager, Certified Air Safety, Vancouver Washington Threats to our workers health and safety are numerous; an often overlooked hazard is the quality of the air they breathe. Whether simple nuisance odors like ...


  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • LATEST TECHNOLOGY: Smartphone SVE BLOWER & OXIDIZER SYSTEMS with Remote Monitoring

    SOIL-THERM designs and builds SVE Blower and Oxidizer systems for environmental and remediation applications that are full of features and LOW in price. By integrating advanced PLC capabilities into these systems, SOIL-THERM offers our customers a whole new level of capabilities.  The SVE Blower system with or without oxidizer allows changes to flows, blower speeds, alarms, manual ...


    By Soil-Therm Equipment, Inc.

  • Case history 3 Middletown, NJ fall 2008

    Shore Environmental was contracted to perform a full gas station decommission in Middletown, NJ in the fall of 2008. After securing local demolition and NJDEP permits, work began draining the lines and removing the pumps. The next step was to uncover the four 5000 gallon tanks and purge them with air while being continuously monitored. This was done utilizing an LEL meter (lower explosive limit) ...


    By Shore Environmental

  • Detecting Gases: What You Can`t Smell Can Hurt You

    Walking through a drill-site area, a worker smells rotten eggs and stops tor a minute or two to assess where a gas leak might exist. Rubbing his itchv eves as he investigates further, he notices that he no longer smells the tell¬tale hydrogen sulphide odour. He does not realize that the gas has deadened his olfactory senses and unless he leaves the area within seconds, he could lose ...

  • Case study - Pharmacuetical Company chooses the QUADRANT NRV Thermal Oxidizer

    Faced with meeting the needs of their Pharma Industry MACT Standards, one Fortune 100 Pharmaceutical Manufacturer called on Catalytic Products International, Inc. The challenge for Catalytic Products International was to design a system that was able to process the ultra-high LEL (high concentration of VOC’s) and deal with corrosive acids produced in the process off gas and the ...

  • Heat/Web offset printer uses the TRITON Series Thermal Oxidizer

    A heat-set/web offset printer recently installed a TRITON-Regenerative Thermal Oxidizer from Catalytic Products International, Inc. The TRITON system was contracted on a turnkey basis, in which CPI engineered and installed; the ductwork system from all dryers, foundation work, electrical integration, and rigged the oxidizer. The project was installed on time and without any added costs. The ...

  • Flexographic printer chooses the TRITON Series Regenerative Thermal Oxidizer

    A flexographic printer recently installed a TRITON-Regenerative Thermal Oxidizer from Catalytic Products International, Inc. The TRITON system was contracted on a turnkey basis, in which CPI engineered and installed; the fugitive enclosure system to meet method 204, the ductwork system from all presses, foundation work, electrical integration, and rigged the oxidizer. The project was installed on ...

  • Regenerative Thermal Oxidizer, TRITON Series, Flexographic Printer Project - Case Study

    A flexographic printer recently installed a TRITON Regenerative Thermal Oxidizer from Catalytic Products International, Inc. The TRITON system was contracted on a turnkey basis, in which CPI engineered and installed; the fugitive enclosure system to meet method 204, the ductwork system from all presses, foundation work, electrical integration, and rigged the oxidizer. The project was installed on ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you