lime slurry production Articles

  • Cement and Lime Kilns case study

    Cement and Lime Kilns PROCESS DESCRIPTION Cement, lime and gypsum manufacturing processes have in common the mixing of inorganic minerals calcined at high temperatures typically using rotary kilns (vertical kilns are also used). CEMENT Regular Portland cements are the usual products for general concrete construction. The raw ...

  • Conservation of iron and lime bearing raw materials by recycling of basic oxygen furnace (BOF) sludge in iron ore sintering

    Basic Oxygen Furnace (BOF) sludge is one of the by–products generated during process of steel making. It has very high level of iron oxide and lime content. However, the high moisture content of the BOF sludge (35–40%) is a major obstacle in its recycling. Internal recycling of the BOF sludge, with or without pre–treatment, is an integral feature of integrated steel plants in advanced countries. ...


    By Inderscience Publishers

  • Technical and Economic Evaluation and Selection of Sulfate Ion Removal Technologies for Recovery of Water from Mineral Concentrate Transport Slurry

    This paper presents the findings of a comprehensive evaluation for a Primary Mineral Processing (PMP) company that contracted Battelle to identify economical technology to remove sulfate ion (SO4 2-) from mineral slurry transport (MST) water, now disposed of as a waste, for reuse or sale. MST water is separated from product by dewatering a sulfidic mineral concentrate slurry prior to loading and ...

  • Sioux Falls, Verder Pumps

    The Sioux Falls Water Purification Plant in South Dakota USA, had always relied on gravity to feed slaked lime slurry to their softening basins. In 2009, the staff decided to give gravity a helping hand by trialing a pump to move the slurry more effectively. Lime slurry is a dense product to transfer with a high solid content of up to 35%. Due to the slurry’s abrasive nature which causes ...

  • Utilisation of waste marble powder in cement industry

    Presently large amounts of slurry are generated in marble cutting plants with serious consequences on the environment and humans. This paper presents test results showing the feasibility of using waste marble powder (WMP) in cement industry as a substitute limestone. Also, it describes the formulation of new lime–based (CR II) cementitious materials derived from these industrial wastes. The ...


    By Inderscience Publishers

  • Power Case Study - North Incinerator

    North Incinerator Finds Solution to Excessive Sweep Elbow Wear At Montgomery County's North Incinerator plant, there was a problem several years ago. The Dayton, OH, area trash-to-energy plant was experiencing repeated shutdowns due to sweep elbow failure in its dense phase pneumatic conveying system, a component of the lime injection system in operation there. In order to ...


    By HammerTek Corporation

  • Pathogen Inactivation by a Closed Alakaline System

    ABSTRACTThe efficiency of advanced alkaline disinfection in closed systems has been demonstrated to depend on the balance of ammonia concentration, pH, exposure time, temperature, total solids content, post-treatment storage time and mixing effectiveness. When the alkaline system is a closed one, an additional pathogen stressor is added: pressure. The effect of the alkaline dosing has been ...

  • Difficult Complex Decisions For Coal-fired Power Plant Operators

    Changing fuel prices, government regulations and technology all combine to make decision making difficult for operators and developers of coal-fired power generation facilities around the world. Power plant designers in developing countries face new local environmental regulations plus additional requirements stipulated by lenders such as the World Bank. In the developed world, the regulations ...


    By The McIlvaine Company

  • Sand Plant

    Sand Plant,Sand Processing Plant The sand plant reserve came from a old stream bed, that had a 20 to 30 ft thick sand deposit in it. It was sampled and the lab testing revealed that there was less than 0.03% iron, and a few other metals (TiO2, Al2O3, MgO). The sand plant equipment length of the deposit was over a mile, so ...


  • Solidification/Stabilization

    Introduction: As for in situ solidification/stabilization (S/S), ex situ S/S contaminants are physically bound or enclosed within a stabilized mass (solidification), or chemical reactions are induced between the stabilizing agent and contaminants to reduce their mobility (stabilization). Ex situ S/S, however, typically requires disposal of the resultant materials. Under CERCLA material can be ...

  • Verderflex Peristaltic Industrial Pumps excel in diverse applications

    Verderflex Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to use, easy to control, versatile and reliable way to pump liquids. Verderflex Industrial pumps can be used in a broad range of applications: Anaerobic Digestion Sludge Transfer Verderflex pumps were specified due ...

  • Common Treatment Technologies for Radionuclides in Soil, Sediment, and Sludge

    Unlike organic contaminants (and similar to metals), radionuclides cannot be destroyed or degraded; therefore, remediation technologies applicable to radionuclides involve separation, concentration/volume reduction, and/or immobilization. The most commonly used treatment technology for radionuclides in soil, sediment, and sludge is solidification/stabilization (S/S). This treatment technology is ...

  • APEX – Peak performance from the market leading hose pump manufacturer

    Decades of experience and knowledge have combined with closely scrutinised customer feedback to deliver APEX, three new hose pumps from Bredel, part of the Watson-Marlow Fluid Technology Group. Designed to suit all dosing, metering and transfer applications from 2.8 to 1,200 litre/hour across a broad range of applications, the new APEX pumps are now the first choice for processing plants the ...

  • Dredging Abrasive Materials? Learn about SRS Crisafulli’s New Dredge

    The Rotomite-6000-C, SRS Crisafulli’s newest self-propelled dredge, broadens the Rotomite-6000’s capabilities to include removal of highly abrasive materials. The Rotomite-6000-C also increases the customer’s return on investment (ROI) by cutting sludge ...


    By SRS Crisafulli, Inc.

  • Casebook New Scrubber Technology reduces installation costs case study

    A100,0000-actual-cubic-feet-per-minute (acfm) RotaBed scrubber recently supplied to Tri-Gen Biopower for sulfur dioxide (S02) control at Gilman Paper, St. Mary's, Ga., saved the company an estimated $150,000 in installation costs-Installation of a heavier packed tower would have required extensive reinforcement of an existing steel support structure, said Ken Schifftner, product/district manager ...


    By Bionomic Industries Inc.

  • Wastewater Treatment & Recycle

    Fresh water is a scarce commodity; this fact is well acknowledged by one and all. People at all levels be it general public, governmental bodies, and industries understand the implications of good quality water availability in terms of quantity, cost and wastage. As a consequence, there is a growing consensus on wastewater treatment for recycle/reuse. This paper briefly describes the treatment ...

  • How the federal utility MACT rule may affect US businesses

    The final standards for hazardous air pollutant (HAP) emissions from electric generating units (EGUs), one of the last industries to be regulated by MACT, was just published in the Federal Register on February 16 and officially goes into effect on April 16, 2012. The rule (“Utility MACT”) had been long awaited; the USEPA began developing it 11 years ago. According to federal NESHAP, ...


  • Re-agent dosing - Sodimate installs standardised equipment to meet the specifications of each plant case study

    Water quality refining is the most essential step in water treatment processes. When done properly, it guarantees palatable taste characteristics suitable for drinking water. The reliability and accuracy of the processes for storing, metering, and dissolving the required re-agents are indispensible for successfully completing this final treatment. Outlined below is a case story about Viry- ...


    By Sodimate, Inc

  • Belgian egg processing

    Between 3 and 4 million eggs are broken daily, 5 days a week, to produce egg-white, egg-yolk, and some mixed egg products for a total of 900 - 1000 tons of end-products per week. All is done under the highest hygienic standards. The wastewater treatment plant was built 10 years ago, when the egg breaking capacity was at 1.5 million eggs per day and was engineered for handling an expansion up to 3 ...


    By BluePlanet Labs

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you