liquid handling system Articles

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • Fully automatic prime/re-priming system handles air/liquid mixtures with ease

    Cornell’s Redi-Prime® system addresses the fundamental requirement of customers to have pumps that are easy to operate, re-prime under lift condition, and eliminate carry-over issues of liquids when priming the pump.  Repriming becomes important when entrainment (due to a snore condition) or vortexing occurs. The vacuum pump is always running, so when the liquid ...


    By Cornell Pump Company

  • How To Handle Chemical Spills & Cleanups

    FAST-ACT is designed for liquid and vapor chemical releases, but the chemicals it attacks does not need to be limited to what we traditionally think of as a chemical spill. Toxic and noxious chemicals can come from a variety of sources such as waste water, decomposition, household chemicals, and animals. Since FAST-ACT can be applied to liquid spill or vapor release enabling Emergency Responders ...


    By Fast-ACT

  • Torque about improving handling accuracy

    Dry bulk handling is en route to becoming a precision science with a level of control previously undreamt of, thanks to 20 years of research and development into digital non-contact torque monitoring. Dry bulk handling is following many other industrial processes that have been redeveloped from a ‘black art’ to a highly accurate and controlled procedure. A generation ago much of industry was in ...


    By Sensor Technology Ltd

  • How to Handle Chemical Spills in Laboratories

    Chemical Spill Response Products & Procedures The current political and world climate has forced the Emergency Response Community to take a closer look at the number of potential hazards that they may be called upon to deal with. Of particular concerns are the response to terrorist and/or chemical incidents. Depending on the type of event, responders may be faced with a myriad of ...


    By Fast-ACT

  • Process Vent Handling Hydrochloric Acid Vapors

    Background:This Roche facility in Belvidere was involved in the pilot manufacturing of innovative Vitamin C products. One step in the manufacturing process utilized a vacuum belt filter operation which created undesirable vapor by-products. These corrosive vapors were collected and romoved via vent lines to be absorbed using a carbon bed process (scrubbed). The vapors involved were HCL, ...


    By FAB-TECH Incorporated

  • Pumps for synthetic heat-transfer liquids

    As soon as the temperature in a heat-transfer system becomes too high for water, a plant operator must choose between petroleum-based or synthetic oils as the heat-transfer liquid. When modern petroleum oils are used, systems with feed temperatures up to about 300 °C can stay in service for their entire service life with one filling and with virtually no maintenance. Once feed temperatures ...


    By ALLWEILER GmbH

  • Monitoring and Controlling Pretreated Liquid Waste

    Intelligent dataTaker System Handles All Data Collection CAS DataLoggers has just provided an intelligent data logger for a manufacturer facing stringent environmental regulations requiring them to continuously monitor and manage their effluent disposal. Before effluent is discharged from the facility, it had to be heavily ...


    By CAS DATALOGGERS

  • Dry Ice –Carbon Dioxide: Where is it being used and how to handle safely?

    Carbon dioxide, in its solid form, is colder than ice.  It is so cold, in fact, that handling it without protection can cause frostbite.  It does not melt, but instead dissipates into a gas that can be dangerous to breathe.  This substance is called dry ice, and, when handled properly, has many useful applications. The most practical use of dry ice is to keep things cold. It can be ...

  • Moving difficult-to-handle bulk materials with flexible screw conveyors

    Flexible screw conveyor systems can be engineered to transport bulk materials that tend to pack, cake, smear, break apart or fluidize, and can prevent the separation of blended products. Flexible screw conveyors (Fig. 1) are suitable for most bulk materials, from sub-micron powders to large pellets, both free-flowing and non-free flowing. They are capable of conveying bulk materials at any angle ...


    By Flexicon Corporation

  • Liquid waste off-gas treatment - Case Study

    Application Biffa Waste Services operate a major waste disposal site at Kilsyth in Scotland where they handle many types of industrial liquid effluent. This can give rise to a range of emissions from both the tank farm and the road tanker deliveries. In addition, significant NO2 and nitric acid fume releases can arise from process upset conditions. ERG provided an emergency NO2 ...

  • Automotive: At Sandvik Coromant, Clean Air Group Scrubber Handle Emissions Emergencies case study

    Mr. Tahvanainen heads up a staff of eight maintenance personnel and a supervisor. He is a mechanical engineer with a background in power production and thermodynamics. Editorial Background: Sandvik Coromant of Fair Lawn, NJ is part of Sandvik’s tooling division. The overall Sandvik Corporation employs 35,000 in one hundred and thirty (130) countries. ...


    By CR Clean Air Group, LLC

  • Higher-Quality Pumps Work Best For Bulk Liquid Terminals

    When you’re running a dockside petroleum liquid products, chemicals and LPG/LNG or multiple bulk liquids terminal, your reliability as a supplier – and the ability to win repeat business – is heavily reliant on the quality of the fluid-handling equipment and pumping systems on hand. Reliability rules For terminal operators, reliable handling and high transfer ...


    By DESMI A/S

  • Liquid ring pumps is the heart for conveying fish - Case Study

    Liquid ring pumps are real survivors. Fish Processors would be hard pressed to live without them. With other forms of vacuum pumps being made, Liquid Ring vacuum pumps have proven to be the most reliable. Statement by Jon Ellison Project Manager at Marel, Seattle USA With many years of experience designing and building fish processing systems I can tell you that Liquid Ring Vacuum Pumps have been ...


    By Samson Pumps A/S

  • Liquid Disinfection Applications – Tips and Techniques for Success in Permanent and Temporary Applications

     Abstract The hazards of gaseous oxidizers for wastewater and water disinfection have driven interest to more manageable forms of treatment using liquids. Although traditionally used as a backup or failsafe method of supporting gaseous disinfection forms, liquids disinfectants are now coming into the mainstream as a primary source of disinfecting waste streams. Oxidizers are powerful ...

  • What are the best companies for Zero Liquid Discharge Equipment and Technology?

    With an increasing push for environmental protection, many industrial facilities and effluent regulators are making decisions that lessen their impact on the environment and human health. Changes and implementations are constantly being discussed and met both nationally and internationally to change the way industrial facilities discharge waste, and it is important to know which companies are the ...


    By SAMCO Technologies, Inc.

  • Controlling level of toxic liquids for the foam industry case study

    Solid provides a durable solution for level controlling of toxic liquids, using the SmartScan 50L ultrasonic measurement gauge. Polymers Ashkelon Industries located in the city of Ashkelon, is a major supplier of foam for the furniture and mattresses industry in Israel. The company has a long-standing reputation in manufacturing of foam in various shapes and sizes for mattresses, furniture and ...

  • Thermal deoilers - Thermal deoiling replaces liquid based degreasing

    The Problem A major Automotive company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company had ...


    By Epcon Industrial Systems, LP

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you