liquid-solid separation Articles

  • Energy & Environmental Technology- Solid - Liquid Separation Technology

    Tajhiz Sanaat Baran's mission is to be the provider in the Environmental & Energy Solutions. Our purpose in Energy fields is directed to the engineering consultants and offering update technologies in consumption optimizing and energy saving of Buildings and Factories. In the Environmental fields, we offer High-Tech solutions and make equipment in Water Treatment, Industrial and Sanitary ...


    By TSB Co.

  • Separation

    Introduction: Ex situ separation can be performed by many processes. Gravity separation and sieving/physical separation are two well-developed processes that have long been primary methods for treating municipal wastewaters. Magnetic separation, on the other hand, is a much newer separation process that is still being tested. Gravity Separation Gravity ...

  • The process of flotation: an efficient solid/liquid separation technique for biological materials

    The studied innovative wastewater treatment process involved the initial abstraction of heavy metal ions onto fungal or stalks biomass (biosorption), followed by the application of a typical flotation stage for the efficient downstream separation of metal-laden biosorbent particles. The ability of microorganisms to remove metal ions from dilute aqueous solutions is a well-known property. ...


    By Inderscience Publishers

  • Solid–liquid separation of an effluent produced by a fixed media biofilm reactor

    An experimental study dedicated to the characterization of the settleability of solids produced in immersed fixed media biofilm reactors has been carried out. The influence of operating temperature (0.1 to 16 °C) and surface organic loading rate (OLR) (0.4 to 10 g of soluble carbonaceous BOD5 per m2 of media per day) on settleable solids quantities, particle size distributions (PSD) as ...


    By IWA Publishing

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • Optimisation of micro-processes for shear-assisted solid–liquid separation in a rotatory batch flow vortex reactor

    This paper reports the study of micro-processes in a novel pre-treatment technique using a pellet forming batch flow vortex reactor of cylindrical shape that consists of axially revolving rotor plates between fixed stator plates. The suspension was first mixed with high molecular weight synthetic polymers by stirring for approximately 50 seconds and then agitated for 20 minutes. The process ...


    By IWA Publishing

  • What Are the Benefits of Using a Mechanical Vibrating Separator for Bulk Solids?

    Mechanical vibrating separators are one of three main types of industrial screening machines, along with rectangular and circular screeners. While mechanical separators are generally considered to be at the lower end of the technological spectrum, they offer several advantages over other types of machines in certain bulk solid screening applications. Advantage #1: Cost With their ...


    By VibraScreener Inc.

  • Robust corona-electrostatic separation method for solid waste recycling

    The objective was to reduce variation in the outcome of a corona-electrostatic separation process for solid waste recycling by finding operating conditions (high-voltage level, roll speed, splitter position) under which uncontrollable variation in 'noise factors' (ambient humidity, metal content in the feed) has minimal impact on the quantity and the quality of the recovered products. The samples ...


    By Inderscience Publishers

  • Electrokinetic Separation

    Introduction The principle of electrokinetic remediation relies upon application of a low-intensity direct current through the soil between ceramic electrodes that are divided into a cathode array and an anode array. This mobilizes charged species, causing ions and water to move toward the electrodes. Metal ions, ammonium ions, and positively charged organic compounds move toward the cathode. ...

  • Anaerobic fermentation of organic solid wastes: volatile fatty acid production and separation

    Anaerobic fermentation of organic municipal solid waste was investigated using a leach-bed reactor (LBR) to assess the volatile fatty acid (VFA) production efficiency. The leachate recycle rate in the LBR affected the VFA composition of the leachate. A six-fold increase in the recycle rate resulted in an increase of the acetic acid fraction of leachate from 24.7 to 43.0%. The separation ...


    By IWA Publishing

  • Towards municipal solid waste source separation at the household level in Accra, Ghana

    Municipal solid waste source separation at the household level has been endorsed as the way forward by all stakeholders in the waste management sector in Ghana. The study using waste stream analyses and laboratory investigations assesses the feasibility of this intervention in the Accra Metropolitan Area which has been divided into three income zones. The mean waste percentage composition was ...


    By Inderscience Publishers

  • Produced water treated for Reuse at Colombia oilfield - Case study

    Multistage wastewater treatment and desalination allow produced water to be recycled for irrigation ...


    By Fluence Corporation

  • Principles of Solids Control

    Although the use of drilling fluids within the HDD / trenchless industry is still relatively new, recent trends suggest that this standard is shifting as solids control is one of the most important phases in the drilling process. This shift is due to a growing awareness that drilling fluid maintenance and disposal can become exponential problems as they are both harmful to the environment and ...


    By Elgin Separation Solutions

  • Solid waste routing

    In today’s struggling economy we are all forced to look at ways to reduce expenses. This applies to private and public operations equally. For the private operation, priorities are placed on maintaining profits—a difficult task in a competitive industry. Raising rates is typically met with resistance from customers, as well as opens a door for competitors to move in. For the public ...


    By Waste Advantage Magazine

  • Monroe Parallel Plate Modules increase oils and solids removal in existing API Separator

    Challenge A silicone manufacturing plant was increasing capacity production and needed to increase the processing of the accompanying wastewater stream containing tramp oils and solids. If possible, the plant wanted to increase the efficiency and capacity of two existing 140,000-gallon API Separators to handle the additional wastewater. The plant required that the water be clean enough to ...

  • Visualized study on the interaction between single bubbles and curved solid surface in flotation separation process

    The present study has been devoted to bubble–curved solid surface interaction in water, which is critical to the separation of suspended particles by air flotation. For this purpose, two particular stages of the interaction (collision and attachment) have been examined visually using high-speed photography in a laboratory-scale flotation column. The effects of the surface material and ...


    By IWA Publishing

  • Rotating belt sieves for primary treatment, chemically enhanced primary treatment and secondary solids separation

    Fine mesh rotating belt sieves (RBS) offer a very compact solution for removal of particles from wastewater. This paper shows examples from pilot-scale testing of primary treatment, chemically enhanced primary treatment (CEPT) and secondary solids separation of biofilm solids from moving bed biofilm reactors (MBBRs). Primary treatment using a 350 microns belt showed more than 40% removal of ...


    By IWA Publishing

  • Membranes and theoretical modelling of liquid–gas membrane separation for aromatic compounds removal from water: a review

    Liquid–gas membrane separation techniques - namely, vacuum membrane distillation, membrane air–stripping/sweeping and pervaporation - are non–equilibrium membrane separation processes emerging for the removal of aromatic compounds from industrial wastewater and polluted ground waters. This review focuses on polymeric hydrophobic membranes which are commonly employed in the liquid–gas membrane ...


    By Inderscience Publishers

  • Supported liquid membrane system for Cr(III) separation from Cr(III)/Cr(VI) mixtures

    This paper presents the results of analyses of the chromium(III) transport process from mixtures of Cr(III)/Cr(VI) ions using supported liquid membranes (SLM), in which dinonylnaphthalene sulfonic acid (DNNSA) and di(2-ethylhexyl) phosphoric acid (D2EHPA) were used as carriers. In both cases the membrane worked as a selective barrier for Cr(VI) ions. The increase in both the time of Cr(VI) ...


    By IWA Publishing

  • A smarter approach to solids control

    When looking at technical brochures and marketing materials in regards to solids-control equipment, one question that should always come to mind should be: Is this really necessary? Other great questions to ask are: What are my day-to-day needs; and what are my severe, high-duty needs? Finding the right solidscontrol equipment is much like buying a personal automobile. Most vehicles’ ...


    By Elgin Separation Solutions

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you