liquid waste incinerator Articles

  • The Operation And Optimization of R.C.R.A. Permitted Liquid Injection Hazardous Waste Incinerators

    BASF Corporation in Hannibal, MO has operated multiple liquid incinerators for more than 20 years, burning various liquid wastes on a campaign basis. The composition of these wastes range from high organic content liquids to aqueous wastes. ...

  • Design And Operational Considerations For Chloro-Fluorinated Liquid And Gaseous Waste Incinerators

    Unlike the thermal oxidation of straight chlorinated waste compounds, the incineration of CFC's and other fluorinated compounds present their own unique incineration requirements. By taking these special characteristics into consideration, a reliable incineration system can be tailored to end-user ...

  • Waste Incineration Upgrades at the Eastman Chemical Company

    INTRODUCTION Eastman Chemical Company, headquartered n Kingsport, TN, is an international supplier of organc chemicals, fibers anci plastics with annual sales of approximately $46 biNion and approximately 5300 customers worldwide. Tennessee Eastman Division, also located in Kingsport, is the company’s largest manufacturing fadllity The nine hundred acre site contains manutacturing facilities as ...


  • Emission Performance Results for a Liquid Waste Incinerator upgraded to meet the HWC MACT Standards

    Abstract Eastman Chemical Company operates three hazardous waste incinerators at its facility in Kingsport, Tennessee, one liquid waste incinerator and two rotary kilns. The air pollution control systems for these incinerators are being upgraded to meet the MACT standard for existing hazardous waste incinerators. The upgraded air pollution control systems include a vertical, rapid-quench ...


  • Emissions Performance Results for a Liquid Waste Incinerator Upgraded to Meet the HWC MACT Standards

    ABSTRACT Eastman Chemical Company operates three hazardous waste incinerators at its facility in Kingsport, Tennessee, oneliquid waste incinerator and two rotary kilns. The air pollution control systems for these incinerators are beingupgraded to meet the MACT standard for existing hazardous waste incinerators. The upgraded air pollution controlsystems include a vertical, ...


  • Combustion Of Heavy Fuels And Liquid Wastes

    This paper describes the design and operating conditions of liquid and gas combustors for heavy fuels and liquid wastes. Lower fuel prices can be achieved by switching from light oil to heavy ones, or combining with unconventional waste fuels. Unconventional waste fuels such as energetic off gases and organic liquid waste require especially designed combustion equipment like a special combustor ...

  • Waste water from liquid detergent production

    The Client The Client is a multinational company with more than 250 production sites worldwide. The factory is the only location in Italy of this corporation for the production of cosmetics for personal care (cream or liquid). 80% of the production is for foreign markets. Production lines work 24 hours a day, 6 days per week. The challenge The ...

  • Supercritical water oxidation presented as alternative to incineration – An update

    Environmentally benign waste disposal is becoming a more and more acute problem. A process now being commercialised, supercritical water oxidation is demonstrating extremely efficient organic waste destruction (99.99%) plus excellent environmental characteristics (none of the emissions associated with incineration). The process is especially suitable for the treatment of wastewater and sludges ...


    By SCFI Group Limited

  • Metal releases from a municipal solid waste incineration air pollution control residue mixed with compost

    The influence of 10 wt.% mature compost was tested on the heavy metal leachate emissions from a calcium-rich municipal solid waste incineration air pollution control residue (MSWI APC). Apart from elongated columns (500 and 1250 mm), an otherwise norm compliant European percolation test setup was used. More than 99% of the metals Al, As, Cd, Cr, Cu, Fe and Ni were left in the APC residue after ...


    By SAGE Publications

  • Recycling Vs. Landfills and Incinerators – Do Benefits of One Outweigh the Other?

    Believing the 2011 survey results of the U.S Environmental Protection Agency (EPA), the American nationals generate more than 240 million tons of waste every year. Often referred to as Municipal Solid Waste, this waste originates from households, schools, hospitals, and business establishments. This trash material often finds its place in the wasteland, where it is either recycled, trapped in a ...

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • Marine Waste Management

    The Reasons of Marine Waste Management New rules from IMO (International Maritime Organization), adopted in July 2011, imply substantial changes for all ship or rig types as early as January 2013. By applying waste management, the ship or rig owner or operator takes control of waste handling with the aim of achieving some or all of the following objectives: 1) To fulfill ...


    By Harden Industries Ltd.

  • Waste Management Overview

    Introduction Our Nation has entered an era in which, as a result of changing world conditions, nuclear weapons production is receiving less attention while the public is expressing increasing concern about protecting human health and preserving the quality of our environment. In response to this national concern, the Department of Energy (DOE) has made waste cleanup and environmental restoration ...

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Cementatious considerations for medical waste solidification

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...

  • AVA Technology for Hazardous Waste Treatment - Case Study

    AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and regular piece sizes together with consistency of ...


    By AVA - Huep GmbH u. Co. KG

  • Cementatious Considerations for Medical Waste Solidification

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, ...


  • Radioactive waste management experience of Moscow SIA 'Radon'

    Vitrification and cementation are used for conditioning liquid radioactive waste (LRW) at SIA 'Radon'. More than 2000 m³ of LRW are treated on the vitrification plant and 100,000 m³ of LRW on cementation plants. For clearing LRW are used the filtration, ultra filtration, reverse osmosis, selective sorption, ion exchange, and oxidation. For treatment NPP bottom concentrates the technology of ...


    By Inderscience Publishers

  • Transforming waste into profit: Bioconversion soultions

    BioConversion Solutions, LLC (BCS) has the systems and solutions to transform dealing with biomass from an expense into profit for cities and companies worldwide. Instead of sludge requiring treatment and disposal, BCS has developed sophisticated technologies that allow customers to design, build and operate biological conversion plants. Using the proven proprietary Advanced ...

  • Conventional and Alternative Technologies for the Treatment of Infectious Waste

    Abstract The limited scientific information about infectious waste, and the heightened public awareness of this special component of the waste stream, have contributed to the implementation or strengthening of the regulations in this area. This paper proposes a general working definition of infectious waste, and describes the systems used to limit its potential occupational and public health ...


    By Springer

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you