liquid zero-discharge solution Articles

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Does your facility need Zero Liquid Discharge Technology?

    If your industrial facility discharges its waste into deep wells, streams, sewers to publicly owned treatment works (POTWs), and/or other waterways, it is likely there are some types of regulations on discharging the waste. With an increasing push toward environmental protection, many industrial facilities and effluent regulators are strengthening strategies to reduce industrial process waste. ...


    By SAMCO Technologies, Inc.

  • Case Study - Zero Liquid Discharge (ZLD) Application

    Applied Water Solutions was contacted by a client who planned to move their manufacturing facility to an area where there is strict limitations on water discharge. Working close with the client we created a process flow diagram (PFD) using multiple water purification technologies that provided pure water generation, water recycling capabilities and offsite disposal of solids. From the PFD we then ...

  • Corrugated Printing Facility Zero Discharge

    This company imports corrugated board and prints the labels using a flexographic machine. The facility had a wastewater treatment system using the traditional liquid chemistry of aluminum chloride, caustic for pH adjustment, and an anionic flocculant. The effluent was often out of compliance due copper from the color pigments in the inks. The system required continual adjustment of the 3 ...


    By Integrated Engineers Inc.

  • Case study - Zero liquid discharge in PVA glue production

    The Client The Client is one of the European branches of a Multinational Company leader in the production of adhesives having a wide range of industrial applications. The challenge The company carries out the mixing of basic adhesive ingredients in suitable reactors. The final product is sold in liquid form to the wood and furniture, graphic, textile ...

  • What are the best companies for Zero Liquid Discharge Equipment and Technology?

    With an increasing push for environmental protection, many industrial facilities and effluent regulators are making decisions that lessen their impact on the environment and human health. Changes and implementations are constantly being discussed and met both nationally and internationally to change the way industrial facilities discharge waste, and it is important to know which companies are the ...


    By SAMCO Technologies, Inc.

  • Five common problems with zero liquid discharge and how to solve them

    As more and more facilities are turning to zero liquid discharge (ZLD) for wastewater treatment and effluent reduction—whether it’s to comply with local discharge regulations or recycle and reuse as much water as possible in your process—more information is becoming available about the possible issues your facility might face while using ZLD technology. Because of the scope of ...


    By SAMCO Technologies, Inc.

  • Distillation Process Can Yield Zero Liquid Discharge System

    Many industrial applications produce liquid waste as a by-product of their process. As environmental regulations governing the disposal of industrial wastewater become more stringent, it's imperative that innovative wastewater treatment solutions are used to treat this waste and minimize the environmental impact of disposal. While numerous technologies exist to treat industrial wastewater, Zero ...


    By Samsco Corporation

  • How much will a zero liquid discharge system cost your facility?

    With increasing stewardship of environmental protection, both nationally and internationally, many industrial facilities and effluent regulators are strengthening strategies to reduce industrial process waste by implementing zero liquid discharge (ZLD), a process that limits liquid waste at the end of your industrial process to—as the term suggests—zero. A ...


    By SAMCO Technologies, Inc.

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • Designing With Geosynthetic Clay Liners

    In construction, preventing the penetration of liquids and gases is essential to maintaining the integrity of a structure. Often, containment is just as important, especially when dealing with chemical contaminants or other waste. When looking to stop the spread of contaminated liquids and gases, there are few tools as effective as geosynthetic clay liners (GCL). Read on to learn how to design ...


    By Agru America, Inc.

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • Hybrid gas-liquid electrical discharge for degradation of organic pollutants in aqueous solution

    Hybrid gas-liquid electrical discharge for degradation of phenol was investigated. The removal rate increased with decreasing the phenol initial concentration and adding some catalysts, such as Fe2+, Fe3+and H2O2. Augmenting the particle diameter of activated alumina or exchanging beadings as padding would lead to the reduction of the removal rate of phenol. Local discharge promoted the phenol ...


    By Inderscience Publishers

  • Dielectric barrier discharge induced degradation of diclofenac in aqueous solution

    A dielectric barrier discharge (DBD) reactor as one of the advanced oxidation processes was applied to the degradation of diclofenac in aqueous solution. The various parameters that affect the degradation of diclofenac and the proposed evolutionary process were investigated. The results indicated that the inner concentrations of 10 mg/L diclofenac can be all removed within 10 min under ...


    By IWA Publishing

  • Monitoring and Controlling Pretreated Liquid Waste

    Intelligent dataTaker System Handles All Data Collection CAS DataLoggers has just provided an intelligent data logger for a manufacturer facing stringent environmental regulations requiring them to continuously monitor and manage their effluent disposal. Before effluent is discharged from the facility, it had to be heavily ...


    By CAS DATALOGGERS

  • Packed Cyclone Separator Removes Dust Particles While Recycling Process Liquids; New Solutions to Plant Problems

    Problem: The Monomeros Colombo Venezolanos plant in Barranquilla, Colombia, jointly operated by the South American countries of Colombia and Venezuela, produces caprolactam for the textile industry and various chemical fertilizers for agricultural use. Recently agricultural plant capabilities were increased with the addition of process units to improve the production and quality ...


    By CR Clean Air Group, LLC

  • Purification of inkjet ink from water using liquid phase, electric discharge polymerization and cellulosic membrane filtration

    A method to separate inkjet ink from water was developed using a liquid phase, electric discharge process. The liquid phase, electric discharge process with filtration or sedimentation was shown to remove 97% of inkjet ink from solutions containing between 0.1–0.8 g/L and was consistent over a range of treatment conditions. Additionally, particle size analysis of treated allyl ...


    By IWA Publishing

  • Liquid waste off-gas treatment - Case Study

    Application Biffa Waste Services operate a major waste disposal site at Kilsyth in Scotland where they handle many types of industrial liquid effluent. This can give rise to a range of emissions from both the tank farm and the road tanker deliveries. In addition, significant NO2 and nitric acid fume releases can arise from process upset conditions. ERG provided an emergency NO2 ...

  • Chemical Industry: Packed Cyclone Separator Removes Dust Particles While Recycling Process Liquids Chemical Industry New Solutions to Plant Problems Case study

    Problem: The Monomeros Colombo Venezolanos plant in Barranquilla, Colombia, jointly operated by the South American countries of Colombia and Venezuela, produces caprolactam for the textile industry and various chemical fertilizers for agricultural use. Recently agricultural plant capabilities were increased with the addition of process units to improve the production and quality ...


    By CR Clean Air Group, LLC

  • A review on the use of biopolymers for the removal of toxic metals from liquid industrial effluents

    Various industrial processes such as mining, metal plating, metal finishing, and chrome tanning discharge many chemicals and heavy metals into the plant effluent stream. In view of this, the need of developing viable and relevant technologies that can not only cleanup but also recover valuable components from industrial and biological waste streams is of utmost importance. This paper describes ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you