Locating System Articles on Environmental XPRT

Hazardous waste and not, Baioni-Dicatech system

The identification, characterization and restoration of contaminated areas now represent a big environmental issue, both at European and national level. In the major industrialized countries the issue of contaminated land has come out in all its gravity in the late seventies when, against a widespread awakening of environmental consciousness, important pollutions events emerged. Consequently, in ...

Aug. 4, 2015

By Baioni Crushing Plants Spa

South Fork Wind Farm (SFWF) - Case Study

The South Fork Wind Farm is a planned offshore wind farm located 30 miles east of Montauk that will consist of approximately 15 wind turbines and a subsea transmission system that will deliver energy to East Hampton, NY. Marine survey activities are scheduled to begin in Summer 2017. Marine construction is planned to start 2021. Overview The South Fork Wind Farm is a planned ...

Jun. 19, 2017

By Deepwater Wind LLC

Danone Bottling Plant Increases Production Capacity with Addition of Aeration without Modifying Existing Infrastructure

Overview Aguas Danone de Argentina is a leader in the national mineral and flavored water market, with well-known brands such as Villavicencio, Villa del Sur, Levité, and Ser. Aguas Danone de Argentina is part of the Danone Group, world leader in the food and beverage industry, with products reaching 120 countries on 5 continents. The bottling plant located in ...

Jun. 28, 2017

By Aeration Industries International (AII)

Bird Control in New Construction Sites

When excavating a construction site you’re bound to come across numerous obstacles. While each one has its own level of difficulty to overcome, arguably the hardest to conquer is relocating wildlife from the site. Today we’re featuring a guest article from Emily Matlovich, writer for CADdetails’ blog ...

Jun. 12, 2017

By Bird-X Inc.

Locating Leaks for Cooling Water Systems

This article illustrates how to locate leaks on cooling water systems in loud, industrial environments like Nuclear or Coal power generating plants without digging or putting anything inside the pipeline. Infrared-Energy Pattern Analysis (IR-EPA) works on all pipeline sizes and all pipeline materials because it identifies the water outside the pipeline instead of listening for leak noises ...

Mar. 9, 2016

By EnTech Engineering, Inc

Maintenance To-Do: Coil Cleaning

A coil-cleaning program should be an integral part of maintaining some kinds of process cooling equipment. Most people think of coil cleaning as a building or facility prepares to turn on the air-conditioners for another season. Admittedly, spring is a perfect time to put such cleaning and maintenance at the top of the to-do list. Condenser and evaporator coils are an integral part of HVAC ...

Jun. 28, 2017

By Evapco Inc.

Why You Should Consider a Sample Conditioning Unit for Taking Low NOx Measurements When Using a Portable Emissions Analyzer

Using state-of-the-art technology, we here at E Instruments create high-quality portable industrial combustion gas and emissions analyzers that are capable of taking precise, low NOx measurements for both NO and NO2. In particular, we recommend our sample conditioning unit to those of you who need to take accurate, low NOx or SO2 ...

Jun. 22, 2017

By E Instruments International, LLC

A quick guide to oil analysis for engine test applications

Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...

Jun. 23, 2017

By Spectro Scientific

LIMS Locates the Diamond in the Rough

From the earliest days of digging into the earth for minerals, one question has been raised by all those seeking to make use of the materials the earth offers up: what exactly have we dug up and is it what we hoped it would be? Well we’re not panning for gold anymore and hoping for a glint of something shiny at the bottom of our pans, unless we hobbyists. Modern ...

Jun. 13, 2012

By Thermo Fisher Scientific, LIMS & Laboratory Software

Innovation and location in the multinational firm

This paper provides an overview of the relationship between multinational corporations (MNCs) and local economic systems. It examines the implications of a decentralisation of innovative activity within MNCs for their interaction with local networks. It is shown that this interaction depends upon the type of cluster, whether a general centre of excellence or a specialised centre. These two ...

Mar. 7, 2011

By Inderscience Publishers

Wastewater Treatment Solutions for any location

As an Australian leader in sewage treatment technology, Suncoast Waste Water Management (SWWM) has been serving the needs of isolated communities, mining locations and many other projects not connected to municipal sewage treatment systems, for more than two decades. SWWM offers you complete wastewater treatment solutions for any project! With the knowledge and understanding only gained through ...

Nov. 30, 2009

By Ozzi Kleen Water & Waste Water

Assessment of relative impact of reservoir location

Reallocation of reservoir storage capacity for different water use purposes is regarded as one of the representative strategies for supplying water for human and environmental needs under the difficult situation of new reservoir construction. However, there are impacts of reservoir storage reallocation on river/reservoir systems because each reservoir in a multiple reservoir system is operated ...

Jun. 25, 2014

By IWA Publishing

NEC Classifications and Divisions for Hazardous Locations

Electrical equipment in hazardous (classified) locations present a serious threat for workers due to the existence of explosive dust and vapors. Examples of such facilities range from grain mills and gasoline stations to aircraft hangars and chemical manufacturing plants. To prevent devastating explosions that may occur from the ignition of combustible particles in the atmosphere, the National ...

Mar. 31, 2017

By Larson Electronics LLC

MPPE System for former city gas locations and coal storage locations case study

Specifications: Successfully operated by Stadtwerke Flensburg (Germany) MPPE unit in container, total surface 14 m2 Fully automated and remote controlled Groundwater treatment BTEX reduced from 10,832 µg/l to < 5 µg/l PAHs reduced from 3,948 µg/l to < 1 µg/l Flowrate 6 ...

Nov. 14, 2014

By Veolia Water Technologies Techno Center Netherlands B.V. - MPP Systems

Optimal location of DG for maintaining distribution system stability: a hybrid technique

To enhance the distribution power quality and maintains the voltage stability is a challenging tasks in the complex distribution network. This can be achieved through the distributed generation (DG). In this paper, a hybrid technique has been proposed which improves the distribution stability by allocating the DG at the optimal place. This technique uses the artificial neural network (ANN) and ...

Oct. 7, 2013

By Inderscience Publishers

Transient tests for locating and sizing illegal branches in pipe systems

In pipe systems illegal branches can take away remarkable water resources with negative effects from both the economic and technical points of view. Difficulties in pointing out illegal branches by means of steady-state pressure and discharge measurements are mainly due to the fact that, of course, such systems are not active according to a regular time schedule. In this paper the possibility of ...

Jul. 1, 2011

By IWA Publishing

Locating subverted processes using random packet comparison in SCADA systems

A supervisory control and data acquisition (SCADA) system may be subject to integrity attacks. Anomalies in sensor measurements may be used to detect these attacks, but such techniques do not permit us to locate attacking nodes. We propose a novel technique to enable this. Each participating network node probabilistically copies packets and marks them with routing information, before encrypting ...

Jan. 24, 2013

By Inderscience Publishers

Geostatistical techniques for approximate location of pipe burst events in water distribution systems

This paper focusses on the customisation and further enhancement of the recently developed data-driven methodology for the automated near real-time detection of pipe bursts and other (e.g. sensor faults) events at the district metered area (DMA) level. Assuming the availability of pressure/flow data from an increased number of sensors deployed in a DMA, the aim is to: (i) overcome the ...

Jun. 25, 2013

By IWA Publishing

The drop-lot location problem on a supply chain

This paper presents a model for strategically locating drop-lots on a supply chain distribution network. The problem is modelled as a set covering location problem with the addition of a set of minimum-distance-away constraints. The effect of these constraints on the solution space is dramatic, reducing the problem size significantly. It is also proposed that the use of drop-lots in a supply ...

Aug. 17, 2010

By Inderscience Publishers

Sorting plants for industrial waste, location: south of Germany

Task Separation and sorting of industrial and building site waste as well as bulky refuses. Potential recyclables such as wood, paper, plastics, metals and aluminium shall no longer be sent to garbage incineration, but can be recycled after the sorting into different material fractions. Solution Conception and realisation of a complete industrial waste ...

Jul. 2, 2011

Subscribe to our eBulletins

Add Supplier Profile