locator Articles

  • 4700 Sampler Industrial Park Wastewater Monitoring - InfraServ Knapsack, Germany - Case Study

    The Model 4700 Automatic Refrigerated Sampler from Teledyne Isco, Inc. is used for water quality monitoring at an industrial park operated by InfraServ Knapsack, Germany InfraServ Knapsack InfraServ GmbH & Co. Knapsack KG is the company that operates the Chemical Industrial Park Knapsack. The site is situated in Huerth, south of Cologne in Germany. The park is divided into ...


    By Teledyne Isco

  • London Hotspots for Noise Nuisance Complaints [Infographic]

    As we continues our quest to build up a noise nuisance map of the UK, we recently turned our attention to our fair Capital, London. With 33 boroughs in Greater London, it was always going to be something of a time-consuming task to get the noise complaints data via Freedom of Information (FOI) requests. However, we were pleasantly surprised by the London Local Authorities efficiencies. The vast ...


    By Cirrus Research plc

  • Industrial applications – Air analysis in clean air room - Case study

    Context & Challenges To ensure people’s safety and a good repeatability of industrial process, the analysis of ambient air is crucial. Especially, electronic boards are produced in clean air room by complex lithographic process using very reactive chemicals. The nature and concentration of volatile compounds can be different depending on the chemical process and can also vary ...


    By Chromatotec Group

  • Meeting high standards… Compliant fuel and oil separators from Kingspan Klargester

    All manner of projects, both large and small, are required to maintain compliance with all environmental rules and regulations concerning property drainage. As an aspect of compliance, it is essential that the appropriate separators are deployed in order to meet or exceed the drainage demand but to also comply with the ongoing project demands such as cost and time. Kingspan Klargester offers a ...


    By Kingspan Environmental Ltd

  • Articulated Concrete Blocks Provide Much Needed Protection for Your Pipeline

    One of the many ways that articulated concrete blocks can protect pipelines is by adding structural stability in areas that are particularly prone to erosion. This erosion is not the only type of hazard posed to your pipeline, though, and if you don’t have the proper protection in place, your pipeline could be susceptible to deterioration at the hands of these other threats as well: ...

  • The role of regional location in innovativeness

    The relationship between innovation and regional location is the object of much debate in management studies. This paper analyses the role of the regional location environment in firms’ innovative behaviour using data of 8,193 Spanish firms from different regions in Spain. Our results show that regional-specific factors (autonomous regions, spending on innovation, number of patents applied for ...


    By Inderscience Publishers

  • Innovation and location in the multinational firm

    This paper provides an overview of the relationship between multinational corporations (MNCs) and local economic systems. It examines the implications of a decentralisation of innovative activity within MNCs for their interaction with local networks. It is shown that this interaction depends upon the type of cluster, whether a general centre of excellence or a specialised centre. These two ...


    By Inderscience Publishers

  • Typical Sensor Location Considerations

    The sensor mounting location within a space may be dependent on many variables. There are no specific formulas since each application will have it’s own determining factors and priorities. These include, but are not limited to: source of gas: Is the source a combustion exhaust from a vehicle or furnace or a vapour from a tank spill, pipe leak, or faulty valve? density of ...


    By Arjay Engineering Ltd.

  • Struvite Formation, Prediction and Locations.

    Struvite formation occurs when magnesium, ammonium and phosphate hexahydrate whose elemental composition of magnesium ammonia and phosphate forms in water combine in the exact chemical formulation as expressed by equation Mg2+ + NH4+ + HPO42- + 2H2O MgNH4PO4•6H2O + H+. This is the chemical term and formulation for struvite. This article goes over how Struvite is formed, the parameters for ...


    By Struvite Removal

  • LIMS Locates the Diamond in the Rough

    From the earliest days of digging into the earth for minerals, one question has been raised by all those seeking to make use of the materials the earth offers up:  what exactly have we dug up and is it what we hoped it would be?  Well we’re not panning for gold anymore and hoping for a glint of something shiny at the bottom of our pans, unless we hobbyists.  Modern ...

  • Wastewater Treatment Solutions for any location

    As an Australian leader in sewage treatment technology, Suncoast Waste Water Management (SWWM) has been serving the needs of isolated communities, mining locations and many other projects not connected to municipal sewage treatment systems, for more than two decades. SWWM offers you complete wastewater treatment solutions for any project! With the knowledge and understanding only gained through ...

  • Locating Leaks for Cooling Water Systems

    This article illustrates how to locate leaks on cooling water systems in loud, industrial environments like Nuclear or Coal power generating plants without digging or putting anything inside the pipeline.  Infrared-Energy Pattern Analysis (IR-EPA) works on all pipeline sizes and all pipeline materials because it identifies the water outside the pipeline instead of listening for leak noises ...


    By EnTech Engineering, Inc

  • Assessment of relative impact of reservoir location

    Reallocation of reservoir storage capacity for different water use purposes is regarded as one of the representative strategies for supplying water for human and environmental needs under the difficult situation of new reservoir construction. However, there are impacts of reservoir storage reallocation on river/reservoir systems because each reservoir in a multiple reservoir system is operated ...


    By IWA Publishing

  • Locating pipes and cables case study

    GPR can be used to determine the location and depth of metallic, non-metallic, plastic, concrete and asbestos-concrete utilities, and cables (power, signal, etc.) Locating of  City Utilities The VIY3-300 GPR was used for locating of city utilities (water, gas, sewer, etc.). This profile shows city utilities at a depth of 1.2 and 2.0 meters (wave speed is 130 meters per ...


    By Transient Technologies LLC

  • Combining organisational and physical location to manage knowledge dissemination

    As the physical distance between engineers' workstations increases, the probability that they will communicate regularly decreases rapidly. As with many things in nature, this probability declines as the inverse square of distance. At the same time, it must be remembered that while separation decreases the probability of communication, even very close physical proximity does not guarantee ...


    By Inderscience Publishers

  • Reconstruction RDF plant, location: northern Germany

    Task The use of alternative raw materials and combustibles has been considerably enlarged during the last few years and reaches an energy share of appr. 50%. The mix of the substances taken for the  production of energy has changed: The use of oil residues, fuller’s earth, meat and bone meal etc. has been reduced. Mainly there have been added fluff and pellets sorted out ...


  • Sorting plants for industrial waste, location: south of Germany

    Task Separation and sorting of industrial and building site waste as well as bulky refuses. Potential recyclables such as wood, paper, plastics, metals and aluminium shall no longer be sent to garbage incineration, but can be recycled after the sorting into different material fractions. Solution Conception and realisation of a complete  industrial waste ...


  • Selection of monitoring locations for storm water quality assessment

    Storm water runoff is a major contributor to the pollution of receiving waters. Storm water characteristics may vary significantly between locations and events. Hence, for each given location, this necessitates a well-designed monitoring campaign prior to selection of an appropriate storm water management strategy. The challenge for the design of a monitoring campaign with a given budget is to ...


    By IWA Publishing

  • Case Study - Groundwater: Locating Water Wells

    South Sudan: 4000 L/min water well Date:  February 25, 2015 Site:  Yeri Mozo Village, South Sudan, Africa Equipment:  SuperStingR8 WiFi, SwitchBox56 and passive cables spaced at 5m. Software:  EarthImager2D with a finite element inversion model of dipole-dipole array data. Results:  Resistivity imaging successfully ...


    By Advanced Geosciences, Inc.

  • A New Way to Locate Seeps Into Surface Waters

    How can we determine where groundwater is seeping into rivers and bays?  Knowing seep locations can help with selecting sampling locations, identifying contaminant sources, determining whether contamination is historic or on-going, and designing remediation.  Historically, methods for locating seeps have been limited.  Due to cost, sampling can only be done at a few ...


    By SelkerMetrics

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you