lower flow waste heat Articles

  • Heat Pumps – FAQs

    1. What is a Heat Pump? To put it simply; ground source heat pumps and geothermal heat pumps produce high grade heat from low grade heat which is found in the earth and our atmosphere.2. How does a Heat Pump Work?Heat pumps work in exactly the same way as air conditioners or refrigerators, but in reverse! Heat pumps capture latent energy which is stored in sources such as air, water and earth. ...


    By ICS Cool Energy Ltd.

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Waste Management Solutions for Business

    How to win the race for everyone Waste Management Solutions for Business Industry will always lead the way in the adaptation of new technology, and especially the technology of conservation. This is not necessarily for any ideological reason, but because the people who manage water use better understand the economic incentives for adopting new ...

  • Wasting energy through steam loss

    The European Union Directive on the Energy Performance of Buildings, which relates to all member nations of the European Union, are obliged to set limits on greenhouse gas emissions, particularly from buildings. Typically steam is used for a wide range of applications within larger establishments including, humidification, hot water, space heating and air heating.  Primary energy losses in ...

  • Combustion Of Heavy Fuels And Liquid Wastes

    This paper describes the design and operating conditions of liquid and gas combustors for heavy fuels and liquid wastes. Lower fuel prices can be achieved by switching from light oil to heavy ones, or combining with unconventional waste fuels. Unconventional waste fuels such as energetic off gases and organic liquid waste require especially designed combustion equipment like a special combustor ...

  • Recovering Wasted Energy: Beneath the city streets

    Sewage heat recovery graphNo one likes to think about it, but city planners and engineers often have no choice but to deal with it, and that’s sewage. Though techniques vary somewhat from place to place and from facility to facility, sewage generally flows down pipes with multiple steps in place designed to remove and treat as many solids as possible, before returning the freshly distilled ...


    By DDI Heat Exchangers Inc.

  • Reduction of Waste from Synthetic Rubber Testing and Unreacted Styrene: Kemcor Australia

     Kemcor Australia has used cleaner production processes to reduce waste from synthetic rubber testing and unreacted styrene in small batch production, with significant cost savings. Background Kemcor Australia is a leader in the production of olefins, poly-olefins and synthetic rubber, and is part of the Altona (Victoria) chemical complex, the largest centre for primary ...


  • Hurricane MK System to reduce particulate matter from a wood bark and forestry waste boiler under 30 mg/nm3 - Case Study

    Foreword Hurricane MK System to Reduce Particulate Matter from a Wood Bark and Forestry Waste Boiler Under 30 Mg/Nm3 Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Hurricane Cyclone System, type MK, for Sciérie de Miremont, a French company located in the Nord of Périgord Vert, working in the forest exploitation sector and forestry waste. ACS was contacted ...

  • Case study - ElectraTherm partners with GB Consulting and EnviTec Biogas on first of its kind biogas application

    Biogas/ORC Application on GE Jenbacher 412 Engine Site: Straznice, Czech Rep. Engine Power: 844kWe Green Machine Gross Power Output Avg: 30-40 kWe Thermal Input to the Green Machine: ~500kW Hot Water Input Range: 94°C Hot Water Flow: 12 l/s Liquid Loop Radiator Water Temperature: -7 to 40°C In the Czech Republic, ElectraTherm, distributor GB Consulting and ...


    By ElectraTherm

  • Five Years of Successful Operation – A Report on North America’s First New Temperature Phased Anaerobic Digestion System at the Western Lake Superior Sanitary District (WLSSD)

    The Western Lake Superior Sanitary District (WLSSD) is located on the western shore of Lake Superior in Duluth, Minnesota. Five years ago, the WLSSD undertook a major change in its biosolids program, shifting from sludge co-incineration with solid waste to temperature phased anaerobic digestion (TPAD) and land application. The WLSSD wastewater treatment plant treats average flows of 162 million ...

  • East coast power plant realizes 95% water recovery

    The Facility Bechtel Power Corporation builta power plant in Northampton, Pennsylvania for U.S. Generating Company. The power plant burns culm, a lower quality coal rejected from use in previous decades. By using culm as the fuel, U.S. Generating will clean up a solid disposal site. The power plant contains the usual systems including cooling towers and demineralizers that produce waste ...

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Turbine condensers for propylene production

    Propylene is one of the most important compounds in the chemical industry. It's primarily used to make the plastic polypropylene, but also in many other processes. A propylene factory in Ningbo, China set Körting Hannover AG an exceptional process-engineering challenge. It appointed the company to design special turbine condensers to produce 600,000 tonnes of propylene per year. The ...


    By Körting Hannover AG

  • Air and thermal coupling

    SoilVision systems Ltd. is pleased to announce the addition of full air and thermal coupling between the SVAirFlow® and SVHeat® Professional software packages. The addition extends the capabilities of the software to model flow of air in the pore space of soils. In particular, the flow of air as a result of thermal gradients can be accomplished. This addition allows benefits in modeling ...


    By SoilVision Systems Ltd.

  • Redhill Primary School - case study

    Reducing energy costs and shrinking carbon footprint without compromising on comfort When it came to choosing the right heating and cooling solution for Redhill Primary School, Worcestershire County Council wanted a sustainable alternative to the less environmentally friendly methods of oil or gas. ENER-G Sustainable Technologies (EST) delivered a full turnkey solution from thermal conductivity ...


    By ENER-G

  • Thermal Oxidizer

    THERMAL OXIDIZER   PRINCIPLE OF COMBUSTION The primary function of the Thermal Oxidizer is to destroy the contaminants in the exhaust coming out of a process.  The operation of the Thermal Oxidizer is based on the principle of combustion.  The process of combustion is the most commonly used method to control emissions of organic compounds. ...


    By Epcon Industrial Systems, LP

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you