lubricant system Articles

  • Pumps in lubricant production

    A major business segment at Hermann Bantleon GmbH is the development, production, and sales of lubricants. At its plant in Ulm, Germany, this company starts with high-quality base oils and produces both universal and customized lubricants according to its own formulas. Customized products are often the best way to meet special requirements in cutting and non-cutting production processes. They can ...


    By ALLWEILER GmbH

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • P-80® Lubricants are effective for Pump Seal Maintenance

    One universal goal of treatment plant operators is to keep operations running smoothly and effectively at all times. While many factors contribute to achieving this goal, one simple way to help reach this objective is to perform regular equipment maintenance. Most plants use a variety of different types of pumps. Maintaining and replacing pump seals on a regular basis helps to ensure that systems ...

  • Low natural terrestrial radioactivity in oil–derived lubricants

    Oil and gas production processing operations have been known to involve naturally occurring radioactive materials that lead to internal and external radiation hazards and thus a significant radiation dose to the workers. In this work, samples of nine oil lubricants used on a daily basis were collected from local suppliers in Egypt and analysed to determine their natural radioactivity. The ...


    By Inderscience Publishers

  • DESMI ROTAN Pump in Lubrication Oil Blending Application

    Who dares wins! DESMI Pumping Technology (Suzhou) Co., Ltd. Tianjin office won the order for 31 sets of PD pumps for CHEVRON Tianjin LOBP Expansion. The pumps are mainly used as base oil transfer/unloading pumps or additive transfer pumps. The competition was fierce, and we competed against five other gear pump manufacturers including Viking, Tuthill, Varisco, Daito and the local Botou Pump, ...


    By DESMI A/S

  • AAA Class Stainless Steel Lubricating Oil Purifier

    Zhongneng’s Oil Treatment technology can bring you this!   -TYA High Vacuum UCO Processing Machine | Used Cooking Oil Purifier   Application: The TYA High Vacuum Oil Purification System is made of stainless steel material, it is especially designed to remove ...


  • OM-1 Oil Mist Eliminators Collect Coolant Mists, Lubricant Mists, Smoke

    A major midwest metalworking facility uses 24 OM-1 Mist Eliminators to collect oil mists from over 200 sources, including grinding, dressing, CNC machining, lathes and heat treating operations.  OM-1's ability to accommodate smoke gives it an advantage over centrifugal-type oil mist collectors, which are not usable for smoke. Both soluble and non-soluble oils are used;  OM-1 collects ...


    By Tri-Mer Corporation

  • Briquetting systems for wood and metal

    Almost 30 years ago the Zaisertshofen-based RUF GmbH & Co. KG specialized in the development and production of briquetting systems. What started with a press for briquetting bark, has become a versatile and internationally active company over the years. RUF GmbH & Co. KG manufacture their briquetting systems in Germany. Their manufacturing and design divisions make it possible to respond ...

  • HCL System Exceeds Current Regulations

    Chemron manufactures high-quality specialty chemicals and surfactants for personal care products, industrial, institutional, oil field, mining, coatings, lubricants and water treatment. Some of the operations result in the creation of hydrochloric acid with high variable rates. As expressed by Bill Frost, of Chemron: “Chemronmaintains a strong environmental commitment, which views regulations as ...


  • High pressure pumping systems - it`s all in the design

    High pressure pumping systems are used in a wide range of industrial processes. Careful selection of the components of the pumping system is essential for optimum safety and reliability. Failure to install a quality pump designed for the task could present a potential risk to human health or life or result in significant down-time and loss of production capacity with the associated costs to the ...


    By Cat Pumps

  • Flexibility is key: Screw pumps in oil-supply systems

    Flender AG, a subsidiary of Siemens AG, has been using screw pumps from Allweiler AG for more than 25 years. Flender’s plant in Voerde, Germany (in the industrialized Ruhr region) manufactures gear units for extruder systems and vertical mills. The pumps supply the gear units with oil that is needed both for lubrication and for cooling. Large vertical mills require as much as 2000 l/min in ...


    By ALLWEILER GmbH

  • Losing system pressure - positive displacement pumps

    In a positive displacement pump, flow is directly related to RPM and pressure by the restriction of the flow in the discharge line. Once the system pressure is set, any change in flow will result in a change in pressure. These changes in flow can occur from certain conditions in the pump inlet line, the pump itself, the pump drive or in the pump discharge line. Pump Inlet The ...


    By Cat Pumps

  • The duty-factor - choosing a quality high pressure system

    Definition of Duty-Factor The duty-factor of your pump or system could simply be the product life. Or the duty-factor could be more specifically defined as the length of time a pump or system runs between servicing and the type of performance during this time frame. Elements determining Duty-Factor The duty-factor is affected by many variables including ...


    By Cat Pumps

  • Closed vessel or open channel UV disinfection systems

    Ultra violet disinfection is now a standard feature in most waste water disinfection systems. UV has also been adopted by the drinking water community, as a barrier against the chlorine tolerant species such as Cryptosporidium and Giardia. The technology is widely favored due to its non- chemical nature, the fact that no subsequent de-chlorination process is required, and its ability to be ...


    By atg UV Technology

  • Presmet corporation benefits from Hyde HUF-VIB system

    Challenge Parts manufacturer needs a solution for disposing waste by-products into the local sewer system. Customer Presmet Corporation Industry Parts Manufacturer Product Hyde Ultrafiltration Vibratory System Business Benefits Realized Wastewater ...


    By PRAB, Inc

  • A Simplified Procedure for the Determination of TPH’s in Waters and Soils Using the HC-404 System

    The determination of Total Petroleum Hydrocarbons (TPH), greases, and lubricant residues are important environmental and industrial tests. Fuel and lube oils can be determined in water and soils to track spills and storage tank leaks, while many military and industrial situations require certain components (gas regulators, space shuttle components, weaponry parts, etc.) to have a maximum limit of ...


    By Buck Scientific Inc

  • Performance of an enhanced pervious pavement system loaded with large volumes of hydrocarbons

    Five litres of lubricating oil and two 8.5 litre batches of diesel were deposited on each of two hydraulically isolated experimental enhanced pervious pavement parking bays. The 50 mm aggregate subbases of the two bays were of either recycled concrete or crushed limestone. The bays were constructed in such a way that a near-surface gravity separator was created by the arranging of the outlet ...


    By IWA Publishing

  • Improving energy efficiency: About oil fouling in refrigeration systems

    Introduction Most air conditioning and refrigeration systems have a mechanical compressor which relies upon lubricating oil to function. During the normal course of the refrigeration process, ½% to 8% of the compressor’s lubricating oil is circulated throughout the system along with the refrigerant. Since the early days of refrigeration and air conditioning technology, the ...


    By Power Knot LLC

  • Wet belt friction-induced dynamic instability and noise in Automotive Accessory Belt Drive Systems

    This paper presents an investigation of V-ribbed belt (Micro-V™) wet friction and friction-induced slip noise in Accessory Belt Drive Systems (ABDS). A set of experiments was conducted by using an industry standard test rig and a standard material friction tester. A theoretical analysis and model are presented to elaborate the results. The tribological property of the interface is characterised ...


    By Inderscience Publishers

  • AquFlow (formerly Hydroflo) metering pump helps make fireproofing system a success

    Problem: Part of developing innovative technology is making its application as easy for the user as possible. So when W.R.Grace&Co.-Conn. went to market with an accelerator for its Monokote family of fireproofing products, a key priority was making the system user-friendly. The accelerator can save users money because it makes the product more efficient to apply and increases ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you