lubricant technology Articles

  • PVC injection molding technology

    PVC injection molding process application: water supply pipe, home appliance pipe, house wall plate, industry machine housing body, electronic products packaging, medical equipments, food package. Injection molding process condition Material dry: usually it don’t need dry. ...


    By Focare Mould Co.,Ltd.

  • Is technology the path to a lower carbon future?

    Advances in technology will keep energy supplies plentiful and affordable – enough to meet projected demand many times over — and help pave the way to a lower carbon energy mix, according to data published today in the BP Technology Outlook. “Technology opens up a whole range of possibilities across the energy sector,” said Bob Dudley, BP Group Chief Executive. “It ...


    By GLOBE SERIES

  • Microbe Edition: FOG How In-Pipe Technology Works

    Fats are esters of fatty acids and glycerol which are normally solid at room temperature. Oils are esters of fatty acids and glycerol which are normally liquid at room temperature. Grease is a general term used to describe a soft or melted animal fat or a lubricant (Campbell, 1999). Collectively they are referred to as fats, oils, and grease (FOG). The degradation of FOG that collects within the ...

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Treatment of wastewater contaminated with detergents and mineral oils using effective and scalable technology

    In this work, effective, cheap and scalable methodology is introduced to treat oily wastewater. The water produced from car-wash processes was utilized as a model because it has various pollutants – oil, lubricants, detergents, solid particles, etc. The results showed that the turbidity and chemical oxygen demand (COD) values dramatically decrease by using the proposed treatment process, ...


    By IWA Publishing

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • United States Coast Guard (USCG) Implements Handheld Technology for Onboard Oil Testing in New Cutters - Case Study

    With a motto of “Always Ready,” the United States Coast Guard (USCG) has 11 missions specified by law including drug and migrant interdiction; ports, waterways and coastal security; fishery patrols; search and rescue; and national defense. The USCG’s newest ships include 22 Fast Response Cutters (FRCs) which recently entered service, and 36 more are currently on order. ...


    By Spectro Scientific

  • 20th Annual Presidential Green Chemistry Challenge Awards highlight biomass- and waste-to-resource technologies

    On July 13, 2015, the U.S. Environmental Protection Agency (EPA) announced the winners of the 20th Annual Presidential Green Chemistry Challenge Awards (PGCCA) and honored them at a ceremony at the National Academy of Sciences in Washington, D.C. The PGCCAs were created in partnership with the American Chemical ...


    By Bergeson & Campbell, P.C.

  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • Wallem and AO Schiffahrt uses FluidScan for Shipboard Condition Monitoring - Case study

    With depressed freight rates and overcapacity of shipping on lucrative trade routes, most shipping companies across the world are now practicing "slow steaming" operations. Operating the main "two-stroke" engines at 40-60% of their nominal output results in dramatically lower fuel costs but at high risk of cylinder cold corrosion if lubrication is not carefully managed. Adding to the complexity ...


    By Spectro Scientific

  • Advantage of Shengyang Hermos CNC Internal Grinding Machine

    Advantage of Shengyang Hermos CNC Internal Grinding Machine is as below: 1. This CNC Internal Grinding machine uses a transparent protective bulletproof glass, to meet a wider range of vision safety premise (three sides transparent), easy to observe the internal situation. ...


  • Waste-to-energy in Indonesia

    Brief description on Waste-to-energy technologies and particular equipment that the company has designed and manufactured. CV Wirajasa Teknik Industri is offering Waste Oil Burner and Biomass Combustion to replace conventional burners that utilize fossil fuel such as natural oil, synthetic lubricating oil, Biomass Combustion Chambers can be applied in sereal and nut drying, organic fertilizers ...


    By CV Wirajasa Teknik Industri

  • An environmentally friendly method of cutting and forming of materials by boron nitride coated tools

    To decrease the undesirable effects on global warming and environmental pollution, manufacturing techniques should aim to use less energy, generate less pollution to the environment and aim at higher performance in shaping and cutting materials. In this paper, a new coating technique is presented for cutting and forming tools so that they can withstand higher temperatures, preserve their surface ...


    By Inderscience Publishers

  • Ballistic Separator - From poor relation to serious opponent

    Up until recently the ballistic separator was generally seen as an unreliable machine with horrendous maintenance costs. The ballistic separator is still suffering from this prejudice, although the technology has changed. There has been a large step forward in development due to the increasing demand for ballistic separators for sorting lightweight packaging and co-mingled materials. With the ...


  • Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you