magnetometer Articles

Buried debris case study

Saufley Field, Escambia County, Florida GeoView was tasked with performing a geophysical investigation at a military base in the southeastern United States. The purpose of the investigation was to locate a reported debris burial pit. The burial pit was reported to be 60 feet (ft) in length and up to 10 ft deep. Historical records indicated that the pit contained buried drums and ...

Jan. 17, 2014

By GeoView, Inc.

Integrated Geophysics: Magnetic / EMI surveys at an air force base

PROJECT: EMI and Magnetic surveys at closed waste disposal sites LOCATION: Holloman Air Force Base near Alamogordo, New Mexico PROJECT DESCRIPTION: Designed and performed total-field magnetometer surveys in tandem with EM-31 terrain conductivity (EMI) surveys of approximately 53 acres of closed landfills at an Air Force base in New Mexico. Survey ...

Feb. 15, 2013

Integrated Geophysics: Magnetic and EMI surveys at a solid waste landfill

PROJECT: Magnetic and EMI surveys at a closed municipal solid waste landfill site LOCATION: Pasco, Washington PROJECT DESCRIPTION: Designed and performed a total-field magnetometer survey in tandem with an EM-31 terrain conductivity survey of a closed municipal solid waste landfill located east of Pasco, Washington. Survey was designed to detect ...

Feb. 15, 2013

Potential-Field Methods

Magnetic Surveys Designed and performed a total-field magnetometer survey of a 26-acre wood-waste landfill in Omak, Washington. This magnetic survey was designed to detect buried metallic debris to a depth of 12 feet and was augmented by an EM-34 soil conductivity (soil mapping) survey. Total Field Magnetic Survey - Omak, WashingtonDesigned and performed (utilizing a ...

Feb. 15, 2013

Variable temperature magnetic force microscopy of La2/3Sr1/3MnO3 thin films grown on (LaAlO3)0.3(Sr2AlTaO6)0.7 (LSAT) substrates

The surface magnetic domain patterns of a La2/3Sr1/3MnO3 film grown on a LSAT (001) substrate, where LSAT stands for (LaAlO3)0.3(Sr2AlTaO6)0.7, were observed by magnetic force microscopy (MFM) as a function of the temperature in the 300?360 K range at its remanent state. Magnetic stripe domains showing an up and down magnetic configuration were observed, thus indicating the existence of a small ...

Jun. 16, 2008

Preparation and characterization of iron oxide nanoparticles coated with chitosan for removal of Cd(II) and Cr(VI) from aqueous solution

This study investigated the applicability of magnetite Fe3O4 nanoparticles coated with chitosan (CMNs) for the removal of some toxic heavy metals from simulated wastewater. Magnetic nanomaterials were synthesized using the co-precipitation method and characterized by transmission electron microscope, scanning electron microscope, X-ray diffraction, and Fourier transformer infrared ...

Sep. 29, 2014

Effect of streptavidin functionalised Fe 3 O 4 on the sedimentation of starch

Sedimentation velocity of starch was determined at three different pH in the presence of streptavidin functionalised Fe 3 O 4 nanoparticle. In the first step, the streptavidin functionalised Fe 3 O 4 nanoparticle was synthesised and characterised by various analytical techniques like Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) method, ...

Jan. 16, 2015

Enhanced selectivity and capacity of clinoptilolite for Cd2+ removal from aqueous solutions by incorporation of magnetite nanoparticles and surface modification with cysteine

In this study, magnetic zeolite (MZ) nanocomposite modified with cysteine was developed in order to enhance selectivity and capacity of clinoptilolite for cadmium ion. The prepared MZ nanocomposite is containing clinoptilolite and magnetite nanoparticles with weight ratio of 3:1. The synthesized nanocomposite was characterized by transmission electron microscopy, X-ray diffraction and ...

Feb. 9, 2016

Magnetic Fe<sub>3</sub>O<sub>4</sub>@C nanoparticles as adsorbents for removal of amoxicillin from aqueous solution

Magnetic Fe₃O₄@C nanoparticles as adsorbents for removal of amoxicillin from aqueous solution

In the present study, powder activated carbon (PAC) combined with Fe3O4 magnetite nanoparticles (MNPs) were used for the preparation of magnetic composites (MNPs-PAC), which was used as an adsorbent for amoxicillin (AMX) removal. The properties of magnetic activated carbon were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Brunaeur, ...

Jan. 16, 2014

Molecular nanomagnets: towards molecular spintronics

Molecular nanomagnets, often called single-molecule magnets, have attracted much interest in recent years both from experimental and theoretical point of view. These systems are organometallic clusters characterised by a large spin ground state with a predominant uniaxial anisotropy. The quantum nature of these systems makes them very appealing for phenomena occurring on the mesoscopic scale, ...

Feb. 22, 2010

Activated charcoal–magnetic nanocomposite for remediation of simulated dye polluted wastewater

Herein, we report a straightforward way to fabricate activated charcoal–magnetic nanocomposite (AC–MNC) by chemical precipitation for the sequestration of methylene blue (MB) from a simulated solution. The synthesised nanocomposite was characterised by Fourier transform infra-red (FTIR), Brunauer–Emmett–Teller (BET), transmission electron microscope (TEM) and ...

May 7, 2015

Preparation and application of magnetite nanoparticles immobilized on cellulose acetate nanofibers for lead removal from polluted water

Novel magnetic cellulose acetate (CA) nanofibers were fabricated using an electrospinning process. Co-precipitated magnetite iron oxide nanoparticles were immobilized onto CA nanofibers at different weight ratios (0.2–2.5% wt/v) with a CA concentration of 15% (wt %), applied electric voltage of 20 kV, feeding rate of 1.5 ml/h and 7 cm distance between needle tip and collector. The prepared ...

Jul. 27, 2016

Electromagnetic (EMI) surveys

EMI (EM-34) surveyDesigned and performed an EM-34 soil conductivity (soil mapping) survey of a 26-acre wood-waste landfill in Omak, Washington. This soil mapping survey was designed to detect buried drums at a depth of 60 feet and was augmented by a total-field magnetometer survey. While employed with the Arkansas Department of Environmental Quality (ADEQ), performed approximately 40 ...

Feb. 15, 2013

Efficient removal of some anionic dyes from aqueous solution using a polymer-coated magnetic nano-adsorbent

For the efficient removal of some anionic dyes, a novel adsorbent was developed. The adsorbent was prepared by coating a synthetic polymer on magnetite nanosphere surface as a magnetic carrier. The synthesized nano-adsorbent was fully characterized using Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer, X-ray diffractometer, scanning electron microscope, and ...

Apr. 7, 2017

One-step approach for the synthesis of CoFe2O4@rGO core-shell nanocomposites as efficient adsorbent for removal of organic pollutants

CoFe2O4-reduced graphene oxide nanocomposites (CFG) have been successfully synthesized via one-step solvothermal method. The prepared CFG are characterized by X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, field emission scanning electron microscopy (FESEM), vibrating sample magnetometer and so on. The FESEM results show that CFG have uniform core-shell ...

Nov. 21, 2016

Synthesis and characterization of a novel magnetic biochar from sewage sludge and its effectiveness in the removal of methyl orange from aqueous solution

A novel magnetic biochar from sewage sludge (MSBC) using SrFe12O19 as magnetic substrate was successfully synthesized under high-temperature and oxygen-free conditions. Several techniques and methodologies (X-ray diffraction, Fourier transform infrared spectroscopy and vibrating sample magnetometer) were used to determine the surface functional groups and physicochemical properties of ...

Jan. 2, 2017

Determining the design of Buried foundations case study

Foundation Mapping Determining the three-dimensional design of foundations for telecommunications towers, buildings and road signs can be impractical and sometimes nearly impossible using conventional means. Properly applied geophysical test methods, hand probing and shallow test pits provide a very cost-effective and non-destructive approach to determining the design of foundations. ...

Jan. 17, 2014

By GeoView, Inc.

Locate abandoned production abandoned well case study

Clearwater, Florida Historical records discovered during construction of a commerical building indicated that a deep well with steel casing was likely present within a portion of the project site. Regulatory officials halted construction and insisted that the presence (or absence) of the well be confirmed. If the well was present, it was required that the well be exposed so that it could ...

Jan. 17, 2014

By GeoView, Inc.

Adsorption of Pb2+ from aqueous solution using spinel ferrite prepared from steel pickling sludge

In this paper, spinel ferrite with high crystallinity and high saturation magnetization was successfully prepared from steel pickling sludge by adding iron source and precipitator in the hydrothermal condition. The obtained spinel ferrite was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), vibrating sample magnetometer (VSM), and Zeta potential ...

Nov. 14, 2015