manufactured water control product Articles

  • Using FTIR spectroscopy to measure hydrocarbon pollution in water

    According to the World Health Organization (WHO) and UNICEF’s 2015 Progress on Sanitation and Drinking Water report almost 700 million people around the world don’t have access to clean drinking water [1]. Poor water quality is beginning to return to the developed world too. The strain of population growth, intensified agricultural practices and continued industrial expansion have are ...


    By Specac Limited

  • UV Minimises Risks for Major Food Retailers

    For many years, one of the UK’s largest food manufacturers has made it their business to be the best at producing all manner of bespoke cooked and raw, ready-to-eat vegetables and carbohydrates for their customers, who include chilled food manufacturers, food-to-go operators and, of course, major supermarkets. Being the best means not only complying with food quality standards set by ...


    By atg UV Technology

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • How Not to Lose Cadmium While Measuring?

    Today cadmium finds a better usage than a hundred years ago. For example, metal cadmium plating is used for anticorrosion coatings that are more stable than zinc, nickel and tin-plated. Cadmium plating of steel parts gives greater resistance to corrosion, especially in sea water. About 20% of cadmium goes to the manufacture of cadmium electrodes used in ...


    By Lumex Instruments Group

  • Avondale Foods effluent treatment - Case Study

    Introduction Avondale Foods (Craigavon) Ltd. is one of the UK's leading manufacturers and suppliers of coleslaw, wet salads, side salads, vegetable accompaniments, soups, sauces and mayonnaise to retail and foodservice customers throughout Britain and Ireland. The company has a team of over 380 people working in its state-of-the-art facility, with all products being manufactured on the ...


    By Water Tecnik Ltd.

  • Control water – control mold

    There is no single universal way to eliminate all mold growth. But the single most effective method of controlling mold is to eliminate their source of moisture. Moisture doesn’t just mean actual water; it can also be high humidity. Few molds grow when the humidity is under 70%. If they do, it is very slowly. It is safe to say that you cannot stop mold growth until you stop the moisture. ...

  • Curbing Emissions From The Manufacture Of Wood Products

    Untitled Document Many types of industrial facilities must control airborne emissions of volatile organic compounds (VOCs) and ...


    By BASF Catalysts

  • Cleaner Production in Confectionery Manufacturing: Cadbury Schweppes

    Cadbury Schweppes Pty Ltd has implemented a large number of cleaner production initiatives at it's Ringwood Confectionery plant in Victoria. The annual savings from reduced raw material and waste disposal costs amount to $780,000. Background Cadbury Schweppes Pty Ltd's plant in Ringwood, Victoria produces a range of confectionery products, including Easter eggs, chocolate bars ...


  • Food Manufacturing Wastewater Treatment

    Facility Background The new YIBO, Inc. facility in Warrenton MO is the firm's first US production plant. Using state of the art equipment they will manufacture 26 varieties of soy sauce products for the commercial market. Five gallon containers will be distributed nationwide. As a discharge requirement the local POTW requested a wastewater plant for effluent control prior to ...


    By Auquix, LLC

  • Water recovery system reduces soft drink manufacturers water waste by 35%

    The filtration and water treatment specialist Puresep provide leading soft drinks manufacturer with a state of the art system to reduce their water usage Puresep were contacted to look at ways the soft drinks manufacturer could reduce the amount of rinse water sent to drain – in order to help them achieve their water reduction targets Following an onsite review of the current rinse ...


    By Water Active Ltd

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Water contamination problems solved at automobile air bag manufacturing plant

    The Facility Based in a Rocky Mountain state, this facility produces the sodium azide pellets contained inside the air bags for automobiles produced throughout the world. The Problem During the manufacturing of the air bag propellent, frequent equipment washdowns produce large volumes of wastewater that contain sodium azide and metal sulfide salts. Sodium ...

  • Case study - Neutralization basin odor control for agricultural chemical production

    Challenge: An agricultural plant located in the Midwest manufactures herbicides, pesticides, fungicides, and insecticides. Strict environmental regulations require the company to capture and neutralize all surface runoff and grey water produced at the plant before disposing into the municipal system. In addition, air permits prohibit any odors to cross their fence lines. As ...


    By OMI Industries (OMI)

  • Innovative Solar-Panel Manufacturer Selects Recuperative Catalytic Oxidizer for New Product Line

    Operating Issue A solar-panel manufacturer in California was ready to commercially produce a groundbreaking product that had taken many years to develop. Pollution Systems (PSSI) was initially contacted as a consultant to determine what air pollution control technology was most appropriate for the new product line used in their solar-panel production. PSSI worked closely with the company ...


    By Pollution Systems

  • Case History - Sale of By-product HCl Covers Cost of Emission-Control System

    Problem: Some of the specialty chemical processes at a major chemical manufacturer's plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low ...


  • Sale of by-Product HCl Covers Cost of Emission Control System

    Problem: Some of the specialty chemical processes at a major chemical manufacturer's plant result in considerable HCl loading in the off-gas. The HCl must be removed before the off-gas can be discharged to the atmosphere. Production of saleable by-product HCl solution was an important goal when looking for a high-efficiency HCl removal system. The company wanted to achieve a very low ...


  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Aerospace - Leading Aerospace manufacturing firm - case study

    Application The company designs and builds flight controls for aircraft and launch vehicles. Their product line includes thrust vector and steering controls for space vehicles as well as thruster valves, regulators and integrated manifolds for satellite propulsion. Manufacturing of most of these products requires either military spec plating or anodizing to ensure protection from extreme ...


  • Superior Manufacturing Division, Magnatech Corporation Case study

    15 Years of Saving the Environment Some companies seem to always be ahead of their time. Rather than going with the flow, they choose to step out and try something different. That’s what often leads them to success. L&L Products of Romeo, MI, is one of these mastermind companies. The intellectual wheels of Robert Ligon and Eugene Lane started turning in 1958 after realizing a ...

  • Case study: Printed Circuit Board Manufacturing

    Aspocomp Ltd. is a Finnish leader in the manufacture of printed circuit boards (PCB), thick film hybrid circuits and mechanical assemblies for the electronics industry. Its main customers are European manufacturers of electronics equipment. Rather than producing and marketing its own products, Aspocomp relies on its customers who design the product and provide the specifications and drawings, ...


    By Watman Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you