material label Articles

  • IML labels raw material

    Normally, IML labels raw material is PP,PE or PP and PE mixed co-polymer. Labels have three layers.The first layer is optimum seal layer, second is main layer,the third is hot melt glue layer.  IML labels must have good venting function, When it fusing with ...


    By Focare Mould Co.,Ltd.

  • What can I use to filter my mobile phase?

    If you are using mobile phase that contains salts or, generally, any components that are weighed out for its preparation, you will need to filter the solution before using with HPLC or UHPLC. The most common type of filtration is membrane microfiltration. We sell an extensive group of products for this and they are discussed very well in a blog ...


    By Restek Corporation

  • Managing compliant MSDSs and labels

    Chemical regulatory compliance is growing in complexity as product sourcing and formulations proliferate and organizations expand into new markets on a global scale. Staying current with the requirements of international regulatory initiatives such as the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) and the Registration, Evaluation and Authorization of Chemicals ...


    By 3E Company

  • Nutrition Labels for Products

    In today’s competitive marketplace, providing a verified EPD can help your product stand out as more sustainable. Here’s how to get it done. You know your product is environmentally friendly. It’s more sustainable because your company has reduced resource use and improved the product’s recyclability. There’s a way to show that: take advantage of the ASTM ...


    By ASTM International

  • Managing compliance: Spotlight on MSDS and labels

    The world of chemical regulatory compliance is growing in complexity. For organizations evaluating, producing, storing, using or transporting products that contain regulated materials, accessing and understanding the information necessary to maintain the highest levels of compliance is no small or simple task. As product sourcing and formulations proliferate and organizations expand into new ...


    By 3E Company

  • Syngenta Settles with EPA on Alleged Label Violations

    On September 16, 2016, the U.S. Environmental Protection Agency (EPA) announced it settled an enforcement matter with Syngenta Crop Protection, LLC (Syngenta or Respondent) via a Consent Agreement and Final Order (CAFO) concerning EPA’s allegations that Syngenta violated the ...


    By Bergeson & Campbell, P.C.

  • Carbon Labelling: Impacting the Entire Supply Chain

    Carbon labeling is likely to be a powerful tool for informing consumers about the climate impacts of their  purchasing decisions, but generating and interpreting the data for an accurate  label is not without its challenges. Enhesa’s August 2011 webinar, attended by  over 200 EHS professionals, explored the potential effect of carbon labeling throughout  the entire ...

  • Green labels: The walk behind the talk - `Biodegradable`

    The word “biodegradable” is probably one of the easiest green labels to understand, so one may assume it is also the least likely to be subject to false claims. However, the term is still interpreted very loosely and frequently used on products that are toxic, that break down into harmful environmental contaminants, or that can take many decades, even centuries, to decompose. On top ...


    By green24

  • Towards sustainable society: from materialism to post-materialism

    Finnish university students (n = 198) assessed their attitudes and achievements in implementation of sustainable development in their daily life. The data were collected using a theory-grounded semantic differential technique. A measurement instrument was created by balancing 36 variables of environmental, economic and social sustainability. As a result of logistic regression analysis ...


    By Inderscience Publishers

  • A simple method to determine mineralization of 14C‐labeled compounds in soil

    Degradation of organic compounds in soil is often determined by measuring decrease of parent compound and analyzing occurrence of its metabolites. However, determination of carbon species as end products of parent compound dissipation requires the use of labeled materials which allow more accurate determination of the environmental fate of the compound of interest. The current conventional ...


    By John Wiley & Sons, Ltd.

  • Aligning chemicals labeling with global rules involves major efforts

    The Occupational Safety and Health Administration (OSHA) began the Herculean task of aligning the U.S."s Hazardous Communication Standard (HCS) with the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS) in September 2009. GHS provides harmonized criteria for classifying chemicals according to their health and physical hazards, and specifies hazard ...


    By Bergeson & Campbell, P.C.

  • Improve your approach to hazardous materials

    Today most large organizations that must deal with hazardous materials follow a time-honored process for identifying critical compliance needs and spend the money necessary to make it work. However, committing this level of resources can be tough for smaller companies. The challenge is to effectively manage their entire chemical inventory to stay in compliance and avoid the dangers, fines and ...


    By 3E Company

  • Rust-Oleum Europe Addresses EU Compliance Deadlines with Standardized Safety Data Sheets and Labels

    Rust-Oleum Europe is part of RPM International Inc., one of the world’s largest paint manufacturers. RPM employs approximately 10,000 workers in 94 plants across 22 countries and sells its products in 150 countries worldwide. As a multi-national business unit, Rust-Oleum Europe is committed to complying with all of the different laws and regulations of the European Union countries where its ...


    By IHS

  • Summit Industrial Products Advances Business Process Innovation for Private Label and MSDS Authoring

    Summit Industrial Products (Summit), a wholly-owned subsidiary of German-based Klüber Lubrication, manufactures specialty lubricants under private label relationships. The company manufactures more than 5,000 products at its three North American manufacturing facilities. Due to the increase in demand for its products, Summit began to evaluate numerous initiatives to improve critical business ...


    By UL The WERCS

  • Hazard material information management and regulatory compliance

    Prior to the 1970s, legislative acts addressing hazardous chemicals were few in number and specific to a handful of topics. The Refuse Act of 1899 was often ignored and rarely enforced, and the Atomic Energy Act of 1954 was exclusive to radioactive material. When it came to workplace and community safety involving the handling, storage, disposal, and transportation of hazardous materials, ...


    By 3E Company

  • VSEP recycles coating material and water for reuse in paper coating facility

    The manufacture of coated paper is a major industry worldwide. Total paper manufacturing capacity in the United States is about 102 million tons per year with 5 million tons, or about 5%, being coated paper grades. The addition of coating materials to paper is expensive yet provides improvements to the sheet for its intended uses. Products that typically use coated paper include magazines, ...


    By New Logic Research, Inc.

  • Eusheet: Material Safety Data Sheets in accordance with the safety regulations

    Material Safety Data Sheets in accordance with the safety regulations. EUSHEET Plus GHS/CLP is software that can create Safety Data Sheets that fully comply with safety and environmental protection regulations in all European Union countries. It’s an ...


    By Selerant srl

  • Application of the American Society of Testing and Materials’ (ASTM) New Skimmer Test Protocol

    Abstract The American Society of Testing and Materials (ASTM) subcommittee on skimmers recently adopted a standard methodology for measuring the nameplate capacity for a given skimmer system. Current industry practice allows manufacturers to label skimmers with a nameplate capacity that may bear little relationship to the ability of the skimmer, as a system, to recover oil. Manufacturers ...


    By OHMSETT

  • Raising energy efficiency in a new materials economy - Part II

    There is a vast worldwide potential for cutting carbon dioxide (CO2) emissions by reducing the use of materials. This begins with the major metals--steel, aluminum, and copper--where recycling requires only a fraction of the energy needed to produce these metals from virgin ore, and with the recycling and composting of most household garbage. It continues with designing cars, appliances, and ...


    By Earth Policy Institute

  • Simplifying Safety, MC Technologies new approach to hazardous materials management

    From small offices to manufacturing facilities with hundreds of workers, every workplace must track how it uses and stores hazardous chemicals to protect its employees and the environment. Manufacturers of the materials create material safety data sheets, or MSDS, detailing the dangers, make-up and other pertinent information associated with a hazardous material found in a cleaner, solvent or ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you