material testing industry Articles

  • What are the main indicators of water quality?

    “Water is the driving force of all nature;” so said Leonardo da Vinci. The survival of our planet depends on the availability of water and the condition that it is in. It is therefore vital to make sure that it is able to provide a hospitable environment for those that live in it, and is free from harmful levels of substances for those that drink it. Not ...


    By Aquaread Limited

  • Enhanced acoustic material testing in a tube

    Demands from the Industry   A growing number of customers demand quieter vehicle cabins, and cabin acoustic comfort has become a major concern for the automotive industry. Optimization of the acoustic insulation performance has, therefore, been given a more prevalent role in the design process. In the aircraft industry, acoustic comfort for customers and the use of new, lighter ...

  • Application of the American Society of Testing and Materials’ (ASTM) New Skimmer Test Protocol

    Abstract The American Society of Testing and Materials (ASTM) subcommittee on skimmers recently adopted a standard methodology for measuring the nameplate capacity for a given skimmer system. Current industry practice allows manufacturers to label skimmers with a nameplate capacity that may bear little relationship to the ability of the skimmer, as a system, to recover oil. Manufacturers ...


    By OHMSETT

  • Materials Testing Laboratory Provides Cutting Edge Contamination Testing Solutions

    Many industries have extremely tight parameters for any contamination of parts that are used in their manufacturing process.  Testing for contamination and quality control is an integral part of these companies’ final products. At EMSL Analytical, the Materials Testing Laboratory has extensive experience in providing highly detailed analytical services to assist manufacturers in ...


    By EMSL Analytical, Inc.

  • Testing the oxygen barrier properties of biodegradable packaging materials - Case Study

    The Hemicellulose research group have chosen the Systech Illinois 8001 oxygen permeation analyser to test the barrier properties of polysaccharide films. The University of Helsinki is at the forefront of international research and doctoral education. The quality of the University’s research is reflected in the high number of Centres of Excellence, Academy Professors, ...


    By Systech Instruments Ltd

  • Electrostatic painting residues as an alternative raw material for red clay industry

    In this study, the viability of using electrostatic painting residues - paint sludge - as a raw material to the red clay industry was investigated. Red clay-based ceramic masses containing electrostatic paint residues were formulated during the study. The clays were obtained from the Rio do Rastro deposit, in Gravataí, and were of the standard formulation used in industry. Different ceramic mass ...


    By SAGE Publications

  • Problem solving in product development: a model for the advanced materials industries

    Problem solving has been identified as a key aspect of product development. Yet, existing descriptive models of problem solving in product development are derived from experience in traditional fabrication and assembly-based industries. This paper examines the sequence of problem solving activities in the advanced materials industries. As opposed to the paradigm of product development seen in ...


    By Inderscience Publishers

  • Thermal Analysis of Medical Materials

    Thermal analysis offers an accurate and cost-effective way to test materials that will be used for medical purposes. In a new live presentation, METTLER TOLEDO experts will review the benefits of various thermal analysis methods commonly used to test the properties, characteristics, and safety of potentially lifesaving new materials. METTLER TOLEDO is pleased to present ...


    By Mettler - Toledo Int. Inc

  • When is material ‘spent?

    The definition of solid waste has been frequently tested in the courts. A recent court decision provides new guidance on this meaning, and might have made things tougher for well-meaning enterprises. The definition of a hazardous waste under the Resource Conservation and Recovery Act (RCRA) is nearly impossible to understand. A recent court ruling has not helped eliminate confusion and, some ...


    By Bergeson & Campbell, P.C.

  • Ultrasonic Testing For Non Destructive Testing

    Ultrasonic Testing or UT as its known has programs in a wide range of sectors, from aerospace, automobile, to substance, oil, large storage space, and power creation and overseas. UT is aspect of a selection of techniques known as NDT (Non Destructive Testing) methods. Their objective in industry is to allow the examination of parts and equipment ...


    By Non Destructive Testing Lab

  • Material Matters - An Engineering and Fabrication Challenge

    The world of engineering is a very large and diverse universe which ranges from electrial, mechanical and civil to environmentaland structural. It is true that their varied disciplines have many qualities in common, e.g. the mixture of logic, creativity, awareness of cost /benefit ratio etc., are requirements of all engineering. It is equally true that each discipline has its own mind set, ...


    By Fabricated Plastics Limited

  • Small concerns: Nanoscale materials as CECs

    Products are being designed, tested and sold today tluit make use of nanoscale materials and nanoscale properties. The more commonly discussed applications include nanoscale electronics, more efficient water and wastewater membranes, and other materials with tailor-made physical properties (such as weight, strength, etc.) unavailable by their 'macro' counterparts. Due to the explosive growth of ...


    By Burns & McDonnell

  • University Research Group utilise the Systech 8001 OTR analyser to test the oxygen barrier properties of biodegradable packaging materials

    The University of Helsinki is at the forefront of international research and doctoral education. The quality of the University’s research is reflected in the high number of Centres of Excellence, Academy Professors, Fellows and Researchers. It is also actively involved in the Strategic Centres for Science, Technology and Innovation which enable leading research units and companies to ...


    By Systech Instruments Ltd

  • Clinical Hemostasis Testing Industry : Coagulation Technologies And Products Analyzed in Research Report

    ReportsnReports.com adds report Hemostasis Testing Market 2014 : Strategic Assessments of Leading Suppliers to its store. This report presents the clinical significance and market needs for major hemostasis laboratory tests, as well as extensive listings of companies developing or marketing innovative coagulation technologies and products. The report also includes strategic assessments of current ...


  • Development and Application of Oxygen Demand Testing using Industrial Effluent - Case Study

    Abstract The purpose of this study is to develop capacity and protocols for oxygen demand testing that can be used for instruction and research within the BioScience Technology program. For application purposes we chose the PeCOD® Analyzer which offers a unique nanotechnology-based approach to Chemical Oxygen Demand (COD) analysis. Background ...


    By MANTECH Inc.

  • Chemical Industry: Wet Scrubber Passes Acid Anhydride Test Case Study

    A leading U.S. chemical company upgraded air pollution control of maleic anhydride fumes at one of its overseas plants by installing a venturi scrubber. Selection of the scrubber was based on a pilot study to determine the percentage recovery and the maximum solution concentration of maleic anhydride that could be achieved using a wet scrubber. One significant reason for pretesting the ...


    By CR Clean Air Group, LLC

  • Cutting holes for testing vs. testing for holes

    When it comes to geomembrane quality assurance, are destructive testing practices as effective as basic leak detection technologies? The function of a geomembrane liner is to prevent liquid flow to the environment. CQA measures should be judged on how effective they are in meeting this requirement. This article critically examines the industry’s current means of providing confidence ...

  • Abrasives case study - Essroc Materials, Inc.

    Plugging, Surging and Wear-Through Virtually Eliminated by Smart Elbows® At Essroc Materials, Inc., formerly Coplay Cement, plugging and elbow wear in pneumatic conveying lines caused unnecessary downtime and repair expense. The Frederick, MD, facility is a wet-process cement plant that produces 350,000 to 400,000 tons of cement a year using two 400-foot-long rotary ...


    By HammerTek Corporation

  • Watch your Language! Geosynthetics vs Traditional Materials

    During GeoAmericas 2016, Dr. Neil Dixon’s sustainability keynote touched upon many topics for the future of geosynthetics. While sustainability drove most of the lecture, a few of his ideas simply approached how the field positioned itself in the marketplace. He suggested, for example, moving the field away from isolating language like “versus traditional materials.” ...


    By Nilex

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you