materials recovery facility processing Articles

  • Storm Debris Recovery & Processing

    Mobile wood grinding fleet, qualification as a preapproved cleanup contractor and reliable outlets for processed debris are keys to success. The weeklong winter storm that hit the south and East Coast last February was a record-setting event. The state of South Carolina lost 11 percent of its timber, with North Carolina and some East Coast states sustaining similar ...


    By BioCycle Magazine

  • TITECH Technology installed at UPM Materials Recovery

    An estimated 13.2 million tonnes of paper and board products were consumed in the UK in 2008, with 67% of this paper recovered for recycling. Currently recycling rates for paper within the UK are generally very good and are improving, yet there are issues with the quantity and quality of paper for reuse in paper mills. Newsprint and board mills are the main users of recovered paper as their ...


    By TOMRA Sorting GmbH.

  • FOG Waste receiving and processing facility design considerations

    Fats, Oils, and Grease (FOG) wastes and high-strength wastes (HSW) are frequently received at municipal water resource recovery facilities (WRRFs) as trucked-in wastes. These wastes offer significant benefits in terms of revenue from tipping fees and feedstock for co-digestion in anaerobic digesters that produce biogas, which can be beneficially used as fuel. The number of treatment plants ...


    By IWA Publishing

  • Materials recovery from waste cathode ray tubes (CRTs)

    Executive summary ObjectivesThis is the second interim report of this project being carried out by ICER with support from Glass Technology Services. The project is examining potential markets for waste CRT glass. In this second stage five potential applications have been investigated, three for screen glass which does not contain lead and two for lead-containing funnel glass ...

  • Axion Polymers: Brexit could drive UK circular economy

    Brexit offers fresh opportunities for the UK and its manufacturers to secure their raw material supplies, such as recycled plastics, from a stable domestic market and stimulate a circular flow of materials, according to Axion Polymers. The North West-based plastics recycler suggests that potential difficulties in transporting material across borders after March 29 2019 should become a driver for ...


    By Axion Group

  • Granada Eco-Center: Technology at the service of efficient material recovery - Case Study

    Granada Eco-Center, in Alhendin (Granada), with a nominal capacity of 450,000 tons per annum, is totally automated and is one of the leading facilities in waste recycling at the national level, and had a 10.8% waste recovery rate on inputs last year. The plant features 4 treatment lines that process 30 tons per hour and has 10 AUTOSORT ...


    By TOMRA Sorting GmbH.

  • What is energy recovery?

    Processes like incineration and anaerobic digestion not only provide sources of energy, but they also reduce waste volume The term “energy recovery” often is applied only to a narrow number of methods for converting wastes into energy, when in fact it applies to a broad range of technologies used to create heat, electricity, or fuel. Energy recovery gives ...


    By Fluence Corporation

  • Gold Recovery-1

    The manufacturing of jewelry is comprised of molding to form the jewelry followed by a polishing step, then deburring or ultrasonic cleaning. These steps leave residual gold in the rinsing and ultrasonic cleaning waters. To recover the gold, industries use the FloccinAgentstm for a one step liquid/solid separation process. The process is to collect all of the wastewater into a mixing container. ...


    By Integrated Engineers Inc.

  • Recovery of Precious Metal Catalysts - A New Process Using Supercritical Water Oxidation

    Up to now, the recovery of precious metals used as catalysts in chemical processes has involved the use of incineration. Now, however, a British-Swedish joint venture has developed a process which uses supercritical water oxidation instead, which provides many economic and environmental advantages. Precious metals are used extensively in catalysts in a wide range of industrial chemical processes. ...

  • Water Recovery from an Aluminum Can Manufacturing Process Using Spiral-Wound Membrane Elements

    Abstract A waste treatment unit has been designed to recover water and various components from an aluminum can manufacturing process. Due to the scarcity of water in the Middle East and its inherent cost, water recovery is both necessary and cost effective. The manufacturing process generates: 1) an 11,356 L/hr (50 gpm) aqueous stream contaminated with hydrofluoric acid, dissolved aluminum, and ...

  • Food scraps recovery in Ohio

    THE STATE of Ohio launched the Ohio Food Scraps Recovery Initiative in June 2007. Prior to the launch, there were internal discussions at both Ohio Environmental Protection Agency (EPA) and the Ohio Department of Natural Resources (ODNR) for months and years prior to the formal announcement. In September 2007, the State invited grocers, haulers and composters to a stakeholders meeting to ...


    By BioCycle Magazine

  • Case study: OCC recovery

    Challenge A waste recycling facility was looking to recover mainly OCC (Old Corrugated Cardboard) from his waste stream. They saw the value in recovering this product, but were presently manually sorting the material off of the floor on a daily basis. Even with floor sorting, the customer was able to recover in the neighborhood of 10-12 bales per day. Approach ...


    By General Kinematics

  • Preparing the way for commercial organics recovery

    The Planning for a source-separated commercial organics program began in California's Santa Cruz County in 2001. Businesses were surveyed to determine if there was sufficient interest in separate collection of food, food-soiled paper and wax-coated cardboard to supply a collection route. Many restaurants, markets and residential facilities responded enthusiastically to the idea of collection and ...


    By BioCycle Magazine

  • Small Capacity Sulfur Recovery Units

    Documento sin título ...


    By Merichem Company

  • Organics recovery expands in Wyoming`s tetons

    THE TOWN of Jackson, Wyoming is located in a glacial valley, originally referred to as Jackson's Hole by the fur trappers and game hunters who came down out of the mountains to rendezvous and sell their goods for shipment to markets back east. Today, elk and bison spend winter on the National Elk Refuge, its fence line abutting the town of Jackson, where they are fed and protected until they ...


    By BioCycle Magazine

  • Titanium Scrap Metal Processing

    Background A world-class processor of titanium scrap had a wash system whose cleaning solution was becoming contaminated with both free floating unemulsified tramp oil and emulsified water soluble oil that was being washed off of titanium turnings. As the level of oil contamination increased over time in the wash solution, cleaning effectiveness diminished. The processor uses a metric, ...

  • The Importance of Wastewater Treatment for Your Facility: Is it Necessary?

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business. This is an important part of the process to consider, as ignoring it could earn your company various fines or lawsuits and pose a potential threat to public health. ...


    By SAMCO Technologies, Inc.

  • Plasterboard waste recovery from smaller building sites

    Most methods for recovering waste plasterboard from construction sites rely on it being segregated on site into adedicated collection container, such as a skip, bin or bags.  This can be difficult for smaller building sites where spacefor these containers may be limited, and the quantities of plasterboard waste are small thus reducing the costeffectiveness of recovery. However, many small ...

  • An Advanced Biosolids Treatment Process and Potential Beneficial Applications of the Processed Biosolids

    ABSTRACTAn innovative and cost-effective biosolids treatment and processing technology was developed and demonstrated at a pilot and full-scale at the Guelph Wastewater Treatment Plant in Ontario. The Lystek process involves a low but optimized application of heat, alkali, and mixing in a batch or semi-continuous system to achieve the desired physical, chemical and microbiological characteristics ...

  • The Simple Process Of A Metal Recycling Center

    Metal recycling is an eco-friendly way to save our already stressed out environment by the way of recycling old and worn-out metal items to use them further as a raw material in the process of manufacturing new steel items. Metal recycling industry in another right step in the direction of contributing towards more greener and healthier environment. This industry has expanded manifold in recent ...


    By FCT Recovery

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you