medical waste incinerator Articles

  • Waste Incinerator Project

      Medical Waste Incinerator YD Model is our classic product for market. All series included burning capacity 10kgs per hour, 30kgs per hour,50kgs per hour,100kgs per hour,150kgs per hour,300kgs per hour,500kgs per hour. Up to now, all models sale to all over the world and have good feedback from end-customer. The YD Model medical incinerator have multi-combustion chamber and basic dry ...


  • Cementatious considerations for medical waste solidification

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...

  • Cementatious Considerations for Medical Waste Solidification

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, ...


  • Medical waste management in private hospitals in Kuwait

    Hospitals generate and reject material regularly, and improper management of these wastes leads to public health hazards and environmental pollution. The survey presented in this article was carried out in two major private hospitals, namely, Al-Hadi and Al-Salam Hospitals, to determine quantities of different kinds of waste produced, segregated, collected, stored, transported and disposed off. ...


    By Inderscience Publishers

  • Medical waste management practices in southern Jordan

    The purpose of this work was to study medical waste practices in southern Jordan. Five major hospitals in that area were used to conduct this study. It involved distributing a modified version of the questionnaire that was adopted by the World Health Organization (WHO). The surveyed hospitals had total number of beds ranging from 72 to 131 beds, while the average amount of medical waste generated ...


    By Inderscience Publishers

  • Cementatious considerations for medical waste solidification - infection control

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...


  • Cementatious considerations for medical waste solidification - safety online

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood-borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...


  • Benefits of OZONATOR Technology for the Treatment and Sterilization of Medical and Bio-Hazard Waste

    OZONATOR Industries Limited white paper outlines the environmental benefits of ozone based technology for the treatment of regulated medical waste and bio-hazard waste.  OZONATOR Industries Ltd. is the world-wide manufacturer of the OZONATOR NG-3000 medical and bio-hazard waste treatment technology – with zero emissions. The OZONATOR is a revolutionary advancement in waste treatment ...


    By OZONATOR Industries Limited

  • Mayo finds technical fix to reduce incinerator emissions

    While the medical waste incinerator at Mayo Clinic in Rochester, Minn., consistently met state and federal emission requirements, facility leaders wanted to find a way to go beyond these standards. Mayo Clinic’s medical waste incinerator serves Mayo Clinic, Saint Marys Hospital and Rochester Methodist Hospital, which form the largest group medical practice in the world, and processes 2,000 ...


    By Bionomic Industries Inc.

  • Incinerator ops do slow burn over proposed EPA guidelines

    Hospitals and health care facilities are keeping a wary eye on the U.S. Environmental Protection Agency, awaiting the latest word on the agency’s efforts to regulate the incineration of medical wastes. Under the pending guidelines, some predict that many of the nation’s remaining 57 medical waste incinerators will be unable to meet the costs or the technological challenges of retrofitting their ...

  • Recycling; Segregation of Waste; Use of Recycled Products; Energy Conservation: Flinders Medical Centre

     Background Flinders Medical Centre (FMC) initiated the Healthy Environment Project in December 1991 with the aim of minimising waste and exploring other environmental initiatives. FMC is a public teaching hospital in the southern suburbs of Adelaide, with 500 beds and 3,000 staff. Over the past two decades, hospitals have increasingly sought to minimise the risk of ...


  • The Trumpcard of Solid Waste management

    Solid waste management, when you heard about this word - you will be able to see a dump yard picture infront of you. And most of us are thinking that it is an an optimistic one to give solutions for solid waste management.  "Every problem is an opportunity" EcoCare Takes this slogan to bring up various solution to solve ...


    By EcoCare Technologies

  • Environmental Sensors in Waste Management

    Issue: As part of an increasing sentiment among European consumers that environmental protection is important, concern about the impact of landfill is growing. Sensor technology makes it possible to measure and control inputs to landfill sites and pollutants arising from them. However, the exploitation - or uptake - of such technology has been lower than expected in the waste management sector. ...


  • Hazardous Waste Disposal

    Untitled Document Overview We're all aware of the importance of following safety precautions when we work with hazardous chemicals. ...


  • Great advances in resource efficiency - recycling nonwoven process waste

    In the past, there has been no simple technical solution for recycling nonwoven process waste, which consists of side trim and reject rolls. They have been sent to landfill or in the best case incinerated for energy recovery. In October 2011, a pair of recycling extruders was installed on the Windsor Locks, CT, USA, spunbond machine producing nonwovens for medical fabrics. The purpose of the ...


    By Ahlstrom Corporation

  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

  • Eco waste solutions kauai veteran memorial hospital hawaii, USA

    The challenge Kauai Veteran's Memorial Hospital in Hawaii was in need of an on-site medicalwaste disposal system that would address their disposal needs as well as theirlimited space constraints. The location selected for the waste treatment systemwas in a highly visible outdoor courtyard surroundedby hospital rooms. The hospital required a solutionthat would destroy their ...


    By Eco Waste Solutions

  • ES & E OZONATOR Publication Nov 2011

    Disposal of biohazardous material has long been a serious and costly problem for hospitals, clinics, research institutes, bio-industries, airports, ports and other generators of biohazardous and regulated medical waste. Until now, incineration, heat, steam or dangerous chemicals have been the only way to treat many of these wastes. Not only are these processes costly, but they leave a high carbon ...


    By OZONATOR Industries Limited

  • Trade sustainability impact assessment on the environmental goods agreement - Case Study

    EXECUTIVE SUMMARY On 24 January 2014 at the World Economic Forum in Davos, the EU, together with 13 other WTO members pledged to launch negotiations to liberalise global trade in environmental goods (EGs). The negotiations are employing the Asia-Pacific Economic Cooperation (APEC) list of environmental goods as a starting point with the intent of expanding it to liberalise a "broad ...


    By OZONATOR Industries Limited

  • The Tozzi Decision: Another Arrow in Manufacturers’ Quiver in Product Defense Wars

    On November 23, 2001, the United States Court of Appeals for the D.C. Circuit gave parties aggrieved by flawed government characterizations of chemical products reason to cheer. In Tozzi v. Department of Health and Human Services,1 the court rejected the government’s argument that a medical plastic tubing manufacturer lacked Article III standing to sue the U.S. Department of Health and Human ...


    By Bergeson & Campbell, P.C.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you