medical waste producer Articles

  • The shredding of hospital and medical waste

    Waste produced in hospitals is a type of waste considered special or dangerous, as the material is composed of different elements:  biological and anatomical components, single use items deriving from surgical treatment, material used by healthcare personnel such as shirts, caps and masks, bandages, medicines used by patients, single-use glass and plastic containers used for extracting and ...


    By SatrindTech Srl

  • Pharmaceutical and Medical Sector Waste Review Service

    Pharmaceutical manufacturing plants generate a variety of waste streams throughout the production, supply and organisational processes. While the day-to-day activities are similar from one plant to the next, the actual processes used in pharmaceutical manufacturing ...


    By GPT Waste Management Ltd

  • Medical waste management in private hospitals in Kuwait

    Hospitals generate and reject material regularly, and improper management of these wastes leads to public health hazards and environmental pollution. The survey presented in this article was carried out in two major private hospitals, namely, Al-Hadi and Al-Salam Hospitals, to determine quantities of different kinds of waste produced, segregated, collected, stored, transported and disposed off. ...


    By Inderscience Publishers

  • Assessment of medical waste management in educational hospitals of Tehran University

    Medical waste includes materials that are produced in the course of health protection, medical treatment and scientific research; it forms a separate category of medical or health care waste (Republic of Croatia, 1996b and 2004; Capak, 2001; Ropeik and Gray, 2002). However, it seems that the fraction of waste generated at medical institutions, known as special or regulated medical waste (Lee et ...


    By University of Tehran

  • Benefits of OZONATOR Technology for the Treatment and Sterilization of Medical and Bio-Hazard Waste

    OZONATOR Industries Limited white paper outlines the environmental benefits of ozone based technology for the treatment of regulated medical waste and bio-hazard waste.  OZONATOR Industries Ltd. is the world-wide manufacturer of the OZONATOR NG-3000 medical and bio-hazard waste treatment technology – with zero emissions. The OZONATOR is a revolutionary advancement in waste treatment ...


    By OZONATOR Industries Limited

  • Reuse of Wastewater: Johnson & Johnson Medical

     Johnson & Johnson Medical's Sydney plant is recycling water previously discharged from its water purification system. The project demonstrates that common sense 'low-technology' options for recycling industrial process water can ease pressure on both water supply and sewerage systems, and save money at the same time. Background Johnson & Johnson Medical (J&J) ...


  • Recycling; Segregation of Waste; Use of Recycled Products; Energy Conservation: Flinders Medical Centre

     Background Flinders Medical Centre (FMC) initiated the Healthy Environment Project in December 1991 with the aim of minimising waste and exploring other environmental initiatives. FMC is a public teaching hospital in the southern suburbs of Adelaide, with 500 beds and 3,000 staff. Over the past two decades, hospitals have increasingly sought to minimise the risk of ...


  • Hazardous Waste Disposal

    Untitled Document Overview We're all aware of the importance of following safety precautions when we work with hazardous chemicals. ...


  • Guidelines for Hospital Waste Management in Pakistan

    At present there is no Management of Hospital or Health care Waste anywhere in Pakistan. Although some good basic groundwork has been carried out in an attempt to bring about improvements, the situation remain deplorable and represents a grave health risk, not only to medical staff but also to general public. Hospitals, veterinary clinics, laboratories and other health care facilities generate ...


  • Environmental Sensors in Waste Management

    Issue: As part of an increasing sentiment among European consumers that environmental protection is important, concern about the impact of landfill is growing. Sensor technology makes it possible to measure and control inputs to landfill sites and pollutants arising from them. However, the exploitation - or uptake - of such technology has been lower than expected in the waste management sector. ...


  • E-waste Recycling- Compliance or Necessity

    The era of unorganised recycling of e-waste “formally” ended on 30th April, 2012 in India. With the rise of sun of 1st May, 2012, India joined the club of advanced countries committed for organised recycling of electronic waste. Concerns associated with unorganised recycling: I would like to first of all thank Kabadies (a commonly used terminology ...


    By Eco Recycling Ltd

  • A Quick Solution: Modular Waste Water Treatment

    Rust corrodes materials and may lead to impurities. As a result, there is a demand across most sectors for components that are protected against corrosion. Cantin SA, headquartered in Domdidier in Switzerland, specializes in the metalworking of rust-proof materials. The company produces complete products and individual components for many different sectors, from medical technology through the ...


    By EnviroChemie GmbH

  • Composting and biogasification for senna pod waste stabilization

    A medical factory in Finland extracts sennocid from pods of a senna plant with a solvent containing methanol and water. Sennocid is the active compound in some constipation medicines (Otavan Iso Kasvitietosanankirja, 1981). The extraction process produces 50 m3 of pod waste weekly. In 1998, 757 tons of pod waste was produced. The water and methanol contents of the waste are approximately 25 w/w-% ...


    By ORBIT e.V.

  • EPA Proposes Revisions to RCRA Definition of Solid Waste

    On June 30, 2011, U.S. Environmental Protection Agency (EPA) Administrator Lisa Jackson signed a proposed rule seeking to narrow certain recycling exemptions under the Resource Conservation and Recovery Act's (RCRA) "Definition of Solid Waste" (DSW) provisions. The rule should be published in the Federal Register within the next two weeks. A pre-publication copy of the rule and related ...


    By Bergeson & Campbell, P.C.

  • Great advances in resource efficiency - recycling nonwoven process waste

    In the past, there has been no simple technical solution for recycling nonwoven process waste, which consists of side trim and reject rolls. They have been sent to landfill or in the best case incinerated for energy recovery. In October 2011, a pair of recycling extruders was installed on the Windsor Locks, CT, USA, spunbond machine producing nonwovens for medical fabrics. The purpose of the ...


    By Ahlstrom Corporation

  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

  • Food Waste and Obesity A UK Epidemic on more than one scale

    Ever since definitions of a ‘healthy’ bodyweight changed in the 1990s, the world seems to be facing an obesity epidemic. The World Health Organisation (WHO) convened an expert consultation in Geneva that formed the basis for a report that defined obesity – not merely as a coming social catastrophe, but as an “epidemic”. The word ...


    By GPT Waste Management Ltd

  • Reliable production support and fully automatic waste disposal - Case Study

    GWP Packaging is part of GWP Group Ltd, one of the leading and most versatile providers of packaging solutions in Great Britain. Customerspecific product and transport packaging made of corrugated cardboard is developed and produced in its sphere of business. Innovative thinking is the central factor behind the work of the packaging specialist from Cricklade, Wiltshire. The most recent ...


    By HSM GmbH + Co. KG

  • SGS Informs on Persistent Organic Pollutants and Hazardous Waste Management in Greece

    On 25 September 2014, the European Commission (1) announced that it is asking the European Union Court to fine Greece for inadequate management of hazardous waste. Greece Inadequate Management of Hazardous Waste The fine is EUR 14,904,736 and a daily penalty payment of EUR 72,864 until Greece fulfills its obligations. The hazardous waste ...


    By SGS

  • Trade sustainability impact assessment on the environmental goods agreement - Case Study

    EXECUTIVE SUMMARY On 24 January 2014 at the World Economic Forum in Davos, the EU, together with 13 other WTO members pledged to launch negotiations to liberalise global trade in environmental goods (EGs). The negotiations are employing the Asia-Pacific Economic Cooperation (APEC) list of environmental goods as a starting point with the intent of expanding it to liberalise a "broad ...


    By OZONATOR Industries Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you