medical waste safety Articles

  • Cementatious considerations for medical waste solidification - safety online

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood-borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...


  • Cementatious considerations for medical waste solidification

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...

  • Medical Waste and it’s potential hazards

    A review of medical waste management systems was performed to understand (a) the various handling  and disposal procedures in different countries, ( b) the knowledge and awareness of individuals involved  in medical waste generation, handling and disposal, and (c) the potential impacts of the waste stream on  both human health and the natural environment. The purpose of the study ...

  • Cementatious Considerations for Medical Waste Solidification

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, ...


  • A Survey of Environmental Safety Issues at 20 Medical Clinics

    In the study described in this article, the authors performed safety walk-throughs or inspections for 20 clinics located both inside a major medical center clinic (onsite) and away from the main clinic site (offsite). A checklist was used to evaluate compliance with institutional, local, state, and federal guidelines and regulations. The results obtained at onsite clinics were compared with the ...

  • Cementatious considerations for medical waste solidification - infection control

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...


  • Pharmaceutical and Medical Sector Waste Review Service

    Pharmaceutical manufacturing plants generate a variety of waste streams throughout the production, supply and organisational processes. While the day-to-day activities are similar from one plant to the next, the actual processes used in pharmaceutical manufacturing ...


    By GPT Waste Management Ltd

  • Rapid assessment of occupational health and safety measures for personnel handling healthcare waste in the Gaza Strip, Palestine

    Proper healthcare waste (HCW) management practices and precautions are crucial to avoid occupational and environmental health problems amongst healthcare workers. This study aims to assess the occupational health and safety of healthcare workers involved in medical waste handling in two hospitals in the Gaza Strip, Palestine. This study was cross–sectional in design, and a simple random sampling ...


    By Inderscience Publishers

  • Hazardous Waste Disposal

    Untitled Document Overview We're all aware of the importance of following safety precautions when we work with hazardous chemicals. ...


  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Fluid Waste Management and Disposal Practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no ...


  • Fluid waste management and disposal practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care workers potential to become infected. Hepatitis B has ...

  • Recent federal developments in chemical regulation, pesticides, occupational health and safety and related areas

    On January 22, 2009, the Government Accountability Office (GAO) issued a report adding the U.S. Environmental Protection Agency’s (EPA) Integrated Risk Information System (IRIS) to a list of federal programs, policies, and operations that are at a “high risk” for waste, fraud, abuse, and mismanagement. The report claims that the EPA program was added to the list because IRIS is at risk of ...


    By Bergeson & Campbell, P.C.

  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

  • Fluid waste management and disposal practices - industrial hygiene news

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care worker’s potential to become infected. ...


  • SGS Informs on Persistent Organic Pollutants and Hazardous Waste Management in Greece

    On 25 September 2014, the European Commission (1) announced that it is asking the European Union Court to fine Greece for inadequate management of hazardous waste. Greece Inadequate Management of Hazardous Waste The fine is EUR 14,904,736 and a daily penalty payment of EUR 72,864 until Greece fulfills its obligations. The hazardous waste ...


    By SGS

  • Reliable production support and fully automatic waste disposal - Case Study

    GWP Packaging is part of GWP Group Ltd, one of the leading and most versatile providers of packaging solutions in Great Britain. Customerspecific product and transport packaging made of corrugated cardboard is developed and produced in its sphere of business. Innovative thinking is the central factor behind the work of the packaging specialist from Cricklade, Wiltshire. The most recent ...


    By HSM GmbH + Co. KG

  • How to deal with asbestos exposure in your workplace: advice for industrial workers

    At one point, more than 75 different industries exposed workers to asbestos. Even though these industries have been made safer by regulations from the National Institute for Occupational Health and Safety, many workers still come in contact with asbestos products that remain at their jobsites. Although most industrial employees face some form of asbestos exposure risks during their career, ...


    By Intelex Technologies Inc.

  • Why does the market need a new Phosgene indicator badge?

    Usage of Phosgene Phosgene (COCl2) is a non combustible but very toxic gas. It is a raw material for plastics like Polycarbonates (i. e. Macrolon) or Polyurethanes. Monitoring of Phosgene Plants using or manufacturing Phosgene of course underlay strict safety regulations. Therefore they are equipped with portable and fixed gas detectors for Phosgene. While ...

  • Deaths & injuries attributable to HazCom: will a federal prescription save lives?

    This past spring, the U.S. Senate Subcommittee on Employment, Safety and Training convened an historic hearing that could have profound implications for the future of hazard communications (HazCom) in the workplace. A standing-room-only assembly of industry representatives, professional lobbyists and others packed a hearing room in the Dirksen Senate Office Building to wit- ness this first step ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you