medical waste technology Articles

  • Medical Waste and it’s potential hazards

    A review of medical waste management systems was performed to understand (a) the various handling  and disposal procedures in different countries, ( b) the knowledge and awareness of individuals involved  in medical waste generation, handling and disposal, and (c) the potential impacts of the waste stream on  both human health and the natural environment. The purpose of the study ...

  • Managing medical waste technology: how US hospitals adapted to change

    A total of 78 US hospitals responded to a survey in a nation-wide sample for the purpose of analysing their medical waste technology management practices under changing laws and regulations in the early 1990s. Findings show that 77% of these hospitals implemented changes in one or more of their operations in storage, treatment, handling, transport and disposal of medical waste and staff ...


    By Inderscience Publishers

  • Benefits of OZONATOR Technology for the Treatment and Sterilization of Medical and Bio-Hazard Waste

    OZONATOR Industries Limited white paper outlines the environmental benefits of ozone based technology for the treatment of regulated medical waste and bio-hazard waste.  OZONATOR Industries Ltd. is the world-wide manufacturer of the OZONATOR NG-3000 medical and bio-hazard waste treatment technology – with zero emissions. The OZONATOR is a revolutionary advancement in waste treatment ...


    By OZONATOR Industries Limited

  • Reuse of Wastewater: Johnson & Johnson Medical

     Johnson & Johnson Medical's Sydney plant is recycling water previously discharged from its water purification system. The project demonstrates that common sense 'low-technology' options for recycling industrial process water can ease pressure on both water supply and sewerage systems, and save money at the same time. Background Johnson & Johnson Medical (J&J) ...


  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

  • The Trumpcard of Solid Waste management

    Solid waste management, when you heard about this word - you will be able to see a dump yard picture infront of you. And most of us are thinking that it is an an optimistic one to give solutions for solid waste management.  "Every problem is an opportunity" EcoCare Takes this slogan to bring up various solution to solve ...


    By EcoCare Technologies

  • Importing environmental technologies to China

    By mid-2007, the Shuikoushan Non-Ferrous Metal factory in Hunan Province faced a crisis. As part of its 11th Five-Year Plan (2005-2010), the Chinese government was closing down high-polluting factories–and the Shuikoushan factory was among those at risk. The 110 year-old state-owned factory, with a gross annual income of more than US $1 billion and 12,000 employees, was emitting high levels of ...

  • Environmental Sensors in Waste Management

    Issue: As part of an increasing sentiment among European consumers that environmental protection is important, concern about the impact of landfill is growing. Sensor technology makes it possible to measure and control inputs to landfill sites and pollutants arising from them. However, the exploitation - or uptake - of such technology has been lower than expected in the waste management sector. ...


  • Fluid Waste Management and Disposal Practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no ...


  • Leveraging microgrids in waste-to-energy applications

    What do the waste-to-energy and real estate sectors have in common? In both, location is the key factor influencing the bottom line. Although waste-to-energy conversion technologies continue to improve their efficiency, energy will always be worth more when it is in the right location. With rising energy costs and increasing concern over electric power reliability and sustainability, the ...


    By Waste Advantage Magazine

  • Fluid waste management and disposal practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care workers potential to become infected. Hepatitis B has ...

  • A Quick Solution: Modular Waste Water Treatment

    Rust corrodes materials and may lead to impurities. As a result, there is a demand across most sectors for components that are protected against corrosion. Cantin SA, headquartered in Domdidier in Switzerland, specializes in the metalworking of rust-proof materials. The company produces complete products and individual components for many different sectors, from medical technology through the ...


    By EnviroChemie GmbH

  • An EHS Checklist for Low-Risk Technology Facilities

    For environment, health and safety (EHS) managers at technology companies, identifying, assessing and prioritizing potential risks in a lower-risk environment - from offices to call centers - is part of the job. And when it comes to EHS programs, compliance is just the start. The following EHS checklist can serve as an assessment guide for EHS managers of low-risk ...


    By Antea Group - USA

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Infectious Hospital Waste Sterilization by the Rimm Microwave Process : Microbiological Results

    In this paper, preliminary tests are presented to validate the sterilisation capabilities of a new compact apparatus for the sterilisation of medical waste, called MWS ECOPROTECTORTM. The MWS process is constituted of two essential steps: waste shredding and microwave heating in a pressure vessel with a particularly efficient technology called RIMMä ä. Upon shredding, the waste is wetted with a ...


  • Go for the Cheap but Secure Lab Waste Removal and Recycling Plan!

    In the last couple of decades, the number of laboratories that are part of universities, hospitals and other facilities is growing and this is definitely good news. Thanks to these labs we can improve our quality of life. However, during the process of research and use of these labs, specialists who work there create lab waste. This waste can be potentially dangerous and this is the reason why ...


    By I Global Asset Management

  • Fluid waste management and disposal practices - industrial hygiene news

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care worker’s potential to become infected. ...


  • Reliable production support and fully automatic waste disposal - Case Study

    GWP Packaging is part of GWP Group Ltd, one of the leading and most versatile providers of packaging solutions in Great Britain. Customerspecific product and transport packaging made of corrugated cardboard is developed and produced in its sphere of business. Innovative thinking is the central factor behind the work of the packaging specialist from Cricklade, Wiltshire. The most recent ...


    By HSM GmbH + Co. KG

  • SGS Informs on Persistent Organic Pollutants and Hazardous Waste Management in Greece

    On 25 September 2014, the European Commission (1) announced that it is asking the European Union Court to fine Greece for inadequate management of hazardous waste. Greece Inadequate Management of Hazardous Waste The fine is EUR 14,904,736 and a daily penalty payment of EUR 72,864 until Greece fulfills its obligations. The hazardous waste ...


    By SGS

  • The Culligan UF-P2 water filtration system - smart well technology for disaster response & beyond

    A Longstanding Commitment to Innovation & Philanthropy As a global leader in water treatment, Culligan has developed innovative industrial and commercial water treatment systems for over 70 years. The company's worldwide network, strong service capability and revolutionary technology offers customers one source for end-to-end water treatment solutions tailored to help meet their ...


    By Culligan Matrix Solutions

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you