medical waste treatment technology Articles

  • Benefits of OZONATOR Technology for the Treatment and Sterilization of Medical and Bio-Hazard Waste

    OZONATOR Industries Limited white paper outlines the environmental benefits of ozone based technology for the treatment of regulated medical waste and bio-hazard waste.  OZONATOR Industries Ltd. is the world-wide manufacturer of the OZONATOR NG-3000 medical and bio-hazard waste treatment technology – with zero emissions. The OZONATOR is a revolutionary advancement in waste treatment ...


    By OZONATOR Industries Limited

  • Managing medical waste technology: how US hospitals adapted to change

    A total of 78 US hospitals responded to a survey in a nation-wide sample for the purpose of analysing their medical waste technology management practices under changing laws and regulations in the early 1990s. Findings show that 77% of these hospitals implemented changes in one or more of their operations in storage, treatment, handling, transport and disposal of medical waste and staff ...


    By Inderscience Publishers

  • Reuse of Wastewater: Johnson & Johnson Medical

     Johnson & Johnson Medical's Sydney plant is recycling water previously discharged from its water purification system. The project demonstrates that common sense 'low-technology' options for recycling industrial process water can ease pressure on both water supply and sewerage systems, and save money at the same time. Background Johnson & Johnson Medical (J&J) ...


  • A Quick Solution: Modular Waste Water Treatment

    Rust corrodes materials and may lead to impurities. As a result, there is a demand across most sectors for components that are protected against corrosion. Cantin SA, headquartered in Domdidier in Switzerland, specializes in the metalworking of rust-proof materials. The company produces complete products and individual components for many different sectors, from medical technology through the ...


    By EnviroChemie GmbH

  • Importing environmental technologies to China

    By mid-2007, the Shuikoushan Non-Ferrous Metal factory in Hunan Province faced a crisis. As part of its 11th Five-Year Plan (2005-2010), the Chinese government was closing down high-polluting factories–and the Shuikoushan factory was among those at risk. The 110 year-old state-owned factory, with a gross annual income of more than US $1 billion and 12,000 employees, was emitting high levels of ...

  • Environmental Sensors in Waste Management

    Issue: As part of an increasing sentiment among European consumers that environmental protection is important, concern about the impact of landfill is growing. Sensor technology makes it possible to measure and control inputs to landfill sites and pollutants arising from them. However, the exploitation - or uptake - of such technology has been lower than expected in the waste management sector. ...


  • Leveraging microgrids in waste-to-energy applications

    What do the waste-to-energy and real estate sectors have in common? In both, location is the key factor influencing the bottom line. Although waste-to-energy conversion technologies continue to improve their efficiency, energy will always be worth more when it is in the right location. With rising energy costs and increasing concern over electric power reliability and sustainability, the ...


    By Waste Advantage Magazine

  • Fluid Waste Management and Disposal Practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no ...


  • Fluid waste management and disposal practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care workers potential to become infected. Hepatitis B has ...

  • The Importance of Wastewater Treatment for Your Facility: Is it Necessary?

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business. This is an important part of the process to consider, as ignoring it could earn your company various fines or lawsuits and pose a potential threat to public health. ...


    By SAMCO Technologies, Inc.

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Infectious Hospital Waste Sterilization by the Rimm Microwave Process : Microbiological Results

    In this paper, preliminary tests are presented to validate the sterilisation capabilities of a new compact apparatus for the sterilisation of medical waste, called MWS ECOPROTECTORTM. The MWS process is constituted of two essential steps: waste shredding and microwave heating in a pressure vessel with a particularly efficient technology called RIMMä ä. Upon shredding, the waste is wetted with a ...


  • Fluid waste management and disposal practices - industrial hygiene news

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care worker’s potential to become infected. ...


  • The Culligan UF-P2 water filtration system - smart well technology for disaster response & beyond

    A Longstanding Commitment to Innovation & Philanthropy As a global leader in water treatment, Culligan has developed innovative industrial and commercial water treatment systems for over 70 years. The company's worldwide network, strong service capability and revolutionary technology offers customers one source for end-to-end water treatment solutions tailored to help meet their ...


    By Culligan Matrix Solutions

  • Trade sustainability impact assessment on the environmental goods agreement - Case Study

    EXECUTIVE SUMMARY On 24 January 2014 at the World Economic Forum in Davos, the EU, together with 13 other WTO members pledged to launch negotiations to liberalise global trade in environmental goods (EGs). The negotiations are employing the Asia-Pacific Economic Cooperation (APEC) list of environmental goods as a starting point with the intent of expanding it to liberalise a "broad ...


    By OZONATOR Industries Limited

  • RUGGED WIRELESS POINT-TO-POINT I/O NETWORK FOR REMOTE SENSING AND ACTUATION

    RUGGED WIRELESS POINT-TO-POINT I/O NETWORK FOR REMOTE SENSING AND ACTUATION SureCross DX70 from Banner Engineering provides robust and reliable RF communications A rugged, self-contained point-to-point wireless network that provides reliable configured I/O for remote sensing and actuation is available from Banner Engineering. The SureCross DX70 is designed for process and assembly/manufacturing ...


    By Banner Engineering Corp.

  • Hyde ultrafiltration for tumbling/vibratory deburring applications

    Challenge Fabrication manufacturer has an issue with discharging tumbling water from two vibratory deburring systems. Customer Hartzell Manufacturing Industry Medical, Electronic and Bank Security Product Hyde Ultrafiltration System Business Benefits Realized ...


    By PRAB, Inc

  • Welcome profit case study

    Mastel Aluminium-Halbzeuge GmbH in Talheim is doing very good business by turning all the aluminium cutting waste in production into profit. Shavings occur wherever planing work is done. If you replace planing with cutting, this statement applies accordingly to the imposing, 2600 sq.m. large production workshop of Mastel Aluminium-Halbzeuge GmbH where primarily aluminium is brought ...


    By WEIMA

  • Cleaning up by cleaning up

    Historically, some big businesses have made big messes. Greenhouse gas emissions, oil spills and unsafe water have become unsavoury but all-too-commonplace topics in the news and industry is beginning to sit up and take notice. Within the past couple of decades, businesses have been cropping up in Saskatchewan with the goal of cleaning up others’ messes - or simply keeping a mess from ...


    By OZONATOR Industries Limited

  • Plasma gasification: Harnessing the power of lightning

    Plasma gasification is both a high-tech solution to the problem of waste management and a source of renewable power. The technology has great potential, but can it move from the fringes to the mainstream? The name "plasma gasification" conjures up images of men in lab coats late at night, investigating a far-flung corner of science that is light years away from commercial readiness. In reality it ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you