membrane filter cartridge Articles

  • Cartridge Filters: World Market Report

    Provides continually updated analyses and forecasts of nonwoven, membrane, string-wound, carbon, and metal cartridges in 80 countries and regions with separate forecasts for each application from large paint filters to small blood ...


    By The McIlvaine Company

  • Memtrex-PC Polycarbonate Cartridge Filter

    Producing the Membrane The polycarbonate track-etch (PCTE) membrane filters are precision, two-dimensional microporous screens. As in the case of other screens, particle capture takes place on the surface. Compare this to ordinary cast membrane filters which depend upon particle capture by random entrapment within the filter's tortuous pores. PCTE membranes are manufactured in a two-step ...

  • Developments in string wound filter cartridges

    String wound filter cartridges are the most commonly used filtration media for reducing contamination in water and other liquids. Filtration applications include reverse osmosis and water softening prefiltration, boiler feed water for steam generation, cooling towers and heat exchangers, bottled water, edible oils, oil and gas production, process water for textiles, electroplating and anodizing ...

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Advances in String-Wound Sediment Filter Cartridges

    In the mid-1930s, the first string-wound depth filter cartridge entered the U.S. market. It was made from a woven wire mesh core surrounded by a cotton yarn, which was wound to form the depth filtration medium. The yarn itself was a tightly twisted medium and the major filtration essentially took place at the points of crossings of the yarns- which formed a diamond-shaped pat-tern-rather than ...

  • New developments in filter cartridges for reverse osmosis pre-filtration

    Reverse osmosis (RO) pretreatment systems are designed to reduce suspended solids to a level that will provide the most suitable conditions for the performance of the membrane system. Depending upon the quality of the feed water, pretreatment may include settlement, clarification, multi-media filtration, and chemical treatment. However, sediment pre-filtration is always required to ensure that ...

  • A Membrane Pretreatment Technology

    Nearly all membrane systems, no matter what their raw water source, must utilize some form of pretreatment to remove unwanted organic and inorganic suspended solids. Bag and cartridge filters are efficient at removing suspended solids but must be replaced on a frequent and often costly basis. Some form of suspended solids removal system that cleans itself, maintains high flow rates and stays ...

  • Treating Industrial Water with Membrane Technology

    A variety of industries are finding that it makes sense to reevaluate the way they treat industrial process water, both to improve the quality of their products and increase the efficiency of their processes. Purification systems utilizing crossflow membrane filtration, such as reverse osmosis (RO), nanofiltration (NF) or ultrafiltration (UF) can be a good alternative to traditional filtration ...


  • Self-Cleaning Pre-Filtration for RO Membrane Systems

    ABSTRACT A few years ago physical processes could only remove suspended solids from a water stream. Recent advances in technology now allow the removal of selected molecules and ions from a water stream by physical means using membranes. The membrane process has recently become very efficient and economically feasible for many industrial, commercial, municipal and even residential customers. ...

  • High performance microbiological filter

    Filtration processes are a large cost component of pharmaceutical manufacture. The particle retention efficiency, particle capacity of the filter and the liquid flux all impact on product cost. A non woven electropositive filler media has been developed whose active component is an alumina (AlOOH) fiber two nanometers in diameter and having a surface area of 350-500 m7g. The nano fibers are ...


    By Argonide Corporation

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Crossflow Membrane Filtration High-Purity Water Systems

    INTRODUCTION As the electronics industry continues to provide us with such products as high resolution television, notebook size portable computers and cars with automatic navigation systems, it becomes necessary to produce semiconductors with finer device geometries to allow for efficient placement of more circuits per a given area. This requires increased control of a semiconductor's material ...

  • Crossflow Membrane Applications for Glycol-based aqueous solutions

    Introduction This document is a guide for water treatment engineers to better understand crossflow membrane applications for glycol-based aqueous solutions. It includes glycol applications we have sold equipment for, applications we have successfully tested, and applications we have not tested but are expected to be technically feasible. Glycol-based solutions are commonly used by a ...


  • Genairclean RO membrane cleaning - Case Study

    Trial Period September 2013 to May 2014 Site Water Reuse system, UK Background A Brackish Water Reverse Osmosis (BWRO) system with a history of rapid and consistent membrane fouling was selected to trial the new ‘Genairclean’ micro-bubble multi-mechanism RO membrane cleaning method. The plant reclaims process ...

  • QUA`s Q-SEP Ultrafiltration Membranes Utilized at Hinduja Power Plant

    Overview Visakhapatnam (also known as Vizag) is a city located in the state of Andhra Pradesh in India that has a growing need for a wider electricity network to serve its citizens and industrial activity. To address this need, Hinduja Power decided to build a 1040 MW coal fired power plant to provide power not only to Visakhapatnam, but also throughout the state and to other states in ...


    By QUA Group LLC

  • Self-Cleaning Pre-Filtration for RO and Other Membrane Systems

    Abstract A few years ago physical processes could only remove suspended solids from a water stream. Recent advances in technology now allow the removal of selected molecules and ions from a water stream by physical means using membranes. The membrane process has recently become very efficient and economically feasible for many industrial, commercial, municipal and even residential customers. ...

  • Largest power plant in philippines uses membrane desalination for purified WA

    The Facility Ilijan Plant, developed by KEILCO-KEPCO Ilijan Corporation, is located in the Island of Luzon, about 100 miles south of Manila, Philippines. It is a combined cycle power plant and at 1,200 MW generating capacity, is the largest power plant in the Philippines. The plant consists of two power blocks, which share a common membrane based Seawater Desalination system for ...

  • Removing Solids with Automatic Self-Cleaning Filters

    Introduction The “art” of filtration utilizes many methods for separating solid particles from fluids. There is often no right or wrong method. Water quality and customer requirements usually determine the “best” method for each unique situation. Ridged screens, pleated cartridges, string wound cartridges, melt blown cartridges, woven fabrics, non woven fabrics, sintered metals, granular ...

  • One of the largest ipp power plants in the middle east uses membrane desalination for boiler feed water

    The Facility Sidi Krir Unit 3 & 4 Power Plant, developed by InterGen and Edison SpA, is located about 30 kilometers west of Alexandria, Egypt. It is a natural gas fired power plant and at 685 MW generating capacity, is the largest IPP thermal power plant in the Middle East. The plant consists of two power blocks, which share a common membrane based Seawater Desalination system ...

  • Cost effective boiler makeup system using membrane desalination for power plant in dominican republic

    The Facility Andres Power Plant, developed by Caribbean Thermal Electric LLC, is located in Boca Chica, near Santo Domingo, Dominican Republic. It is a 300 MW gas fired combined cycle power plant and is one of the largest IPP power plants in the Dominican Republic and will supply electricity to Corporacion Dominicana de Electricidad. The plant consists of two power blocks, which ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you