mercury analysis instrumentation Articles

  • Mercury Analysis

    Characteristics of Mercury What is Mercury? Mercury is a naturally occurring silver-colored metallic element noted for its occurrence as a liquid at room temperature and toxic to living organisms. This silvery, opaque liquid metal is very dense, yet has a high surface tension that causes it to form tiny perfect spheres in the pores of the rocks it is found in. It is ...


    By HORIBA Europe GmbH

  • Detecting Mercury in Water

    Determination of Mercury (Hg) in Water by Hand-Held, Portable Cold Vapor Atomic Fluorescence SpectrometryWater is the most familiar and most abundant compound on Earth, making up 71% of its surface area.[1]It is a vital component for all known forms of life and is the aquatic habitat for thousands of species of microalgae, fish and shellfish. [2] With the presence of running water in our ...


    By Arizona Instrument LLC

  • Mercury Ban – Printers Unaffected

    The mercury ban debate has been rife with speculation, confusion, strong accusations and well, a little bit of misleading information. So, together with Brendan Perring of Print Monthly I have been getting to the bottom of this tangled web of information. We have been in contact with the National Measurement and Regulations Office (NMRO) to seek clarification, and today I found myself meeting a ...


    By Alpha Cure (UK)

  • Agreement on mercury finally here

    In Geneva 19 January 2013, due to successful interaction between science and policy making, governments within the UN agreed to a global, legally-binding treaty to prevent emissions and releases of mercury. Prof. Jozef Pacyna and his team at NILU - Norwegian Institute for Air Research, have played a major role in providing the UN policy makers with scientific justification for the treaty. 30 year ...

  • Analysis of Mercury in Wastewater by Microwave Digestion Followed by ICP/MS: Comparison to EPA Methods Approved at 40 CFR 136.3

     ABSTRACT As a cost-saving measure, the use of an existing microwave digestion system and ICP/MS instrument was investigated for the analysis of mercury in domestic wastewater, industry effluent, storm water, and other aqueous matrices analyzed under the City of Portland’s various NPDES permits. A formal alternate test procedure application (ATP) study was undertaken to add total ...

  • Tekran instruments—monitoring around the world

    Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...

  • Using FIMS to determine mercury content in sewage sludge, sediment and soil samples

    Tim Flow Injection Mercury System (FIMS) is a dedicated system that integrates flow injection mercury cold vapor generation with a very sensitive detector. The exceptional system stability and the long path measurement cell provide instrumental detection limits as low as 5 ng/L using a sample volume of 5(H) jxL. The improved sensitivity of the FIMS permits sample dilution, therefore reducing the ...


    By PerkinElmer, Inc.

  • The application of Flow Injection Technology to automating cold vapor MERCURY analyses

    This document describes the application of flow injection technology to cold vapor mercury analyses. It can be obtained from PerkinElmer by requesting method number ENVA-100. Appendices 1 and 2 show letters from the US EPA indicating acceptability through the Alternate Test Program for both drinking water and wastewater sample analysis. 1.0 Scope and Application 1.1 This ...


    By PerkinElmer, Inc.

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Analysis of low levels of metals in drinking water with a scanning array ICP emission spectrometer and ultrasonic nebulization

    Drinking water is an important factor in exposure to environmental contaminants and is used in preparing foods and beverages for human consumption. Therefore, great care is used to verify that it is free of or contains acceptable limits of toxic substances. With respect to heavy metals and other toxicologically relevant elements, atomic spectrometric techniques are frequently used to determine ...


    By PerkinElmer, Inc.

  • Heavy Metals Water Testing Powered by DNA

    Water pollution is a worldwide problem affecting developing and developed countries alike. Heavy metal contaminants are one prevalent type of water pollutant. They are persistent in the environment once d is charged and removal from source waters is necessary to ensure a clean drinking water supply. The problem of heavy metal pollution arises from several sources. Heavy metals such as uranium can ...


    By ANDalyze

  • Increased demand for XRF analyser hire

    Steve Drake, NDT Market Manager at Ashtead Technology believes that XRF is one of the most important technologies in the company’s fleet of NDT and environmental testing instruments. “With a small amount of training, almost anyone can implement detailed inspections in a wide variety of applications, and with most instruments being lightweight and robust, XRF analysers are among the ...


    By Ashtead Technology Ltd

  • Assessment of spatial and temporal variation of pollutants along a natural channel receiving industrial wastewater

    This study focused on assessing the spatial and temporal variation of pollutant load at six sites along the Tamla Nala, a natural water channel which drains into the River Damodar. Before the discharge point into the river the values of pH (10.23), total suspended solids (745.25 ± 48.98 mg/l), chloride (1218.51 ± 228.86 mg/l), cyanide (0.876 ± 0.348 mg/l), COD (316.8 ± ...


    By Inderscience Publishers

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • Get the Lead Out - Standards Aid in RoHS Compliance

    RoHS, the seminal European sustainability directive, and others like it challenge manufacturers to eliminate hazardous substances in their products. With RoHS compliance deadlines ongoing through at least the next five years, and more to come from other regions and nations, ASTM Committee F40 is helping companies with testing standards and other resources. The recent introduction of the new Apple ...


    By ASTM International

  • Mining Water Quality Application

    Isaac Plains Coal Mine Isaac Plains is an open cut coal mine, in Northern Queensland, Australia. The Isaac Plains Project operates under an Environmental Authority (EA). One of the environmental monitoring requirements which must be met is monitoring water. These include potable water, mine affected water, natural creek flows, water releases, groundwater and the receiving environment. The ...


    By ANDalyze

  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • Noise Measurement

    Definitions Threshold and criterion levels The threshold level is the A-weighted sound level at which a personal noise dosimeter begins to integrate noise into a measured exposure. For example, if the threshold level on a sound level meter is set at 80 decibels (dB), it will capture and integrate into the computation of dose all noise in the employee's hearing zone that equals or exceeds 80 dB. ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you