mercury analytical system Articles

  • Mercury Emissions From The Disposal of Fluorescent Lamps

    The Environmental Protection Agency (EPA) is making available to the public a study containing information relating to its Proposed Rule addressing the management of mercury-containing lamps under the Resource Conservation and Recovery Act Subtitle C hazardous waste management system published in the Federal Register on July 27, 1994, 59 FR 39288. The study consists of an electronic model and ...

  • The determination of mercury at ultratrace levels using FIMS and amalgamation technique

    The PerkinElmer Flow Injection Mercury System (FIMS) is used in combination with an amalgama¬tion preconcentration technique to determine Hg at ultratrace concentrations. Using a 10-mL sample volume, the instrumental detection limit is 0.3 ng/L. The method detection limit obtained in drinking water is 1.0 ng/L with a spike recovery of 100 ± 4%. The operating conditions for the ...


    By PerkinElmer, Inc.

  • Using FIMS to determine mercury content in sewage sludge, sediment and soil samples

    Tim Flow Injection Mercury System (FIMS) is a dedicated system that integrates flow injection mercury cold vapor generation with a very sensitive detector. The exceptional system stability and the long path measurement cell provide instrumental detection limits as low as 5 ng/L using a sample volume of 5(H) jxL. The improved sensitivity of the FIMS permits sample dilution, therefore reducing the ...


    By PerkinElmer, Inc.

  • Mercury Removal from Nerve Gas Ton Container Rinse Waters

    IE was retained by a United States Army subcontractor to perform a process determination with analytical verification for the treatment of the rinse water from decontaminated nerve gas agents. The Pentagon Munitions Deconstruction Committee (PMDC) fully reviewed and approved the process developed. The wastewater was generated from the rinsing of 2,000-pound (ton) containers in a punch/drain/rinse ...


    By Integrated Engineers Inc.

  • Analysis of Mercury in Wastewater by Microwave Digestion Followed by ICP/MS: Comparison to EPA Methods Approved at 40 CFR 136.3

     ABSTRACT As a cost-saving measure, the use of an existing microwave digestion system and ICP/MS instrument was investigated for the analysis of mercury in domestic wastewater, industry effluent, storm water, and other aqueous matrices analyzed under the City of Portland’s various NPDES permits. A formal alternate test procedure application (ATP) study was undertaken to add total ...

  • Tekran instruments—monitoring around the world

    Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...

  • Wastewater Metals Removal

    Industrial Wastewater Treatment Success Stories Wastewater Treatment Metals Removal Ton Nerve Gas Agent Container Rinse Waters ...


    By Integrated Engineers Inc.

  • Bolderwood Campus Southampton (2) – Case Study

    Project Highlights Envirochem carried out broad spectrum radiological and chemical sampling within confined spaces to ascertain the extent of residual contamination within outlet drain sediments, constructional surfaces and nearby soils. Envirochem were able to draw together many different methods of access, sampling and analytical testing ...

  • Analysis of low levels of metals in drinking water with a scanning array ICP emission spectrometer and ultrasonic nebulization

    Drinking water is an important factor in exposure to environmental contaminants and is used in preparing foods and beverages for human consumption. Therefore, great care is used to verify that it is free of or contains acceptable limits of toxic substances. With respect to heavy metals and other toxicologically relevant elements, atomic spectrometric techniques are frequently used to determine ...


    By PerkinElmer, Inc.

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Ground Zero Air Quality Has A Long Way To Go! A Summary of Air Quality Testing in Surrounding Buildings

    There are still a wide range of concerns about air quality in the vicinity of Ground Zero. Many commercial and residential spaces have yet to be re-occupied. In only a few cases has any sort of inspection or testing been done to determine if they are safe to occupy. The greatest concerns are asbestos and the very irritating concrete dust that spread throughout lower Manhattan during the collapse ...

  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • Pollutants in Urban Wastewater and Sewage Sludge

    Untitled Document Executive Summary Water policy in the European Union is aiming to promote sustainable water use and a major ...

  • A Trace of Arsenic

    The cans of baby formula invaded Brian Jackson’s Dartmouth College lab late in 2010. His team picked up an armful of popular brands at the food co-op in Hanover, N.H. Then another armload. Eventually Jackson had a cabinet full of the brightly labeled canisters. Today, he still keeps a few in his office. Not as clutter — that’s not his style. He just likes to keep his toxicology ...


    By Freytech Inc.

  • Water Quality Models

    ' In order to determine the impacts of a particular discharge on ambient water quality, it is usually necessary to model the diffusion and dispersion of the discharge in the relevant water body. The approach applies both to new discharges and to upgrading of existing sources. This note provides guidance on models that may be applicable in the context of typical Bank projects.' Introduction ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you