mercury monitoring solution Articles

  • Mercury free solutions for autoclave temperature monitoring

    Mercury is a naturally occurring element found in the air, water and soil however exposure to the substance, even in small amounts, can lead to severe health and ecosystem issues. Mercury in products can find it’s way into the environment in all sorts of ways such as manufacturing, spills, recycling and disposal. Due to the health risks posed products such ...


    By Camlab Limited

  • Detecting Mercury in Water

    Determination of Mercury (Hg) in Water by Hand-Held, Portable Cold Vapor Atomic Fluorescence SpectrometryWater is the most familiar and most abundant compound on Earth, making up 71% of its surface area.[1]It is a vital component for all known forms of life and is the aquatic habitat for thousands of species of microalgae, fish and shellfish. [2] With the presence of running water in our ...


    By Arizona Instrument LLC

  • Mercury Control Demonstrations

    C1.1 | Halogens and Sulfur in Coals and their Influence on Co-benefit Mercury Capture Bernhard Vosteen | President, Vosteen Consulting Gmbh Not only the range of the coal mercury content itself, but also the range of the native halogen and sulfur contents in coal are of great influence on co-benefit mercury capture, wet and dry. The ...

  • Mapping Quality Assurance Requirements for Continuous Mercury Monitoring Systems

    The Clean Air Mercury Rule (CAMR) requires coal-fired electric power plants to install and operate mercury  continuous monitoring systems by December 31, 2008 such that they will have 12 months of “submittable” data by 1 January 2010. For all practical purposes, “submittable data” are “quality-assured data” that meet the extensive quality control requirements cited in the various regulations that ...


    By Weston Solutions, Inc

  • The application of Flow Injection Technology to automating cold vapor MERCURY analyses

    This document describes the application of flow injection technology to cold vapor mercury analyses. It can be obtained from PerkinElmer by requesting method number ENVA-100. Appendices 1 and 2 show letters from the US EPA indicating acceptability through the Alternate Test Program for both drinking water and wastewater sample analysis. 1.0 Scope and Application 1.1 This ...


    By PerkinElmer, Inc.

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Innovative emissions monitoring uptake soars

    Firms in the UK’s waste and power sectors are proactively seeking Best Available Techniques for emissions monitoring, according to Enviro Technology. Over recent months there has been a surge in demand for sophisticated equipment, such as monitors of total gaseous mercury. The air quality and emissions monitoring specialist believes that a combination of factors, such as the recast ...

  • Measuring unburned carbon in flyash with an automated, on-line monitor

    Increasingly stringent NOx regulations have required plant operators to modify traditional combustion processes. SOx regulations and deregulation have forced plant operators to diversify their coal sources. And new mercury control requirements have been instituted by the U.S. Environmental Protection Agency. These changes challenge plant operators who are trying to achieve the low carbon levels ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • KPDES Permit Compliance: Metals in Wastewater Effluent at Fort Knox

    ABSTRACT Prior to constructing a new FOTW, Fort Knox had a history of exceeding KPDES effluent limitations for ammonia and BOD. The new 6 MGD FOTW solved the problem, but metals exceedances became an issue. The exceedances could be linked to several factors: low water-quality based effluent limitations (WQBELs) on the new KPDES permit, high background concentrations of some metals, and high ...


    By Weston Solutions, Inc

  • Wastewater Metals Removal

    Industrial Wastewater Treatment Success Stories Wastewater Treatment Metals Removal Ton Nerve Gas Agent Container Rinse Waters ...


    By Integrated Engineers Inc.

  • Heavy Metals Water Testing Powered by DNA

    Water pollution is a worldwide problem affecting developing and developed countries alike. Heavy metal contaminants are one prevalent type of water pollutant. They are persistent in the environment once d is charged and removal from source waters is necessary to ensure a clean drinking water supply. The problem of heavy metal pollution arises from several sources. Heavy metals such as uranium can ...


    By ANDalyze

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Activated carbon mat utilized in subaqueous cap on major superfund site case study

    Project: Stryker Bay Location: Duluth, MN Products: GAC Reactive Core Mat® (GAC = Granular Activated Carbon) Background: Stryker Bay was heavily polluted from the late 1800s through 1962. The harbor area was ringed with tar and coke plants, heavy industry and slaughterhouses that all discharged industrial waste into the ...


    By CETCO

  • Controlling Air Pollutants case study

    While it's not always easy to determine what's required for compliance, new technologies can help achieve air-pollution control Selecting air-pollution control equipment can be tricky. It's not only difficult to determine which pollutants must be controlled, but also which type of equipment will best control them to required levels for any given process or facility because there is no ...


    By Bionomic Industries Inc.

  • Mining Water Quality Application

    Isaac Plains Coal Mine Isaac Plains is an open cut coal mine, in Northern Queensland, Australia. The Isaac Plains Project operates under an Environmental Authority (EA). One of the environmental monitoring requirements which must be met is monitoring water. These include potable water, mine affected water, natural creek flows, water releases, groundwater and the receiving environment. The ...


    By ANDalyze

  • Modest Growth for Air Pollution Control Market

    The Clean Air Act amendments of 1990 created a wave of optimism in the air pollution control (APC) business. The subsequent decade, however, resulted in backwash of disappointment for APC companies as the market for stationary source equipment declined from 1-4% per year from 1993-1998. Growth returned to the APC market, however, with 1999 and 2000 characterized as 'good' years by the Institute ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you