mercury monitoring system Articles

  • New White Papers! What you need to know about mercury emissions monitoring?

    Gasmet Technologies (Finland) has published two White Papers on the monitoring of mercury emissions to air from industrial processes. The LCP BREF Guide provides an overview of current initiatives to reduce mercury emissions and explains how continuous mercury emissions monitoring can help inform process control and the efficient operation of pollution abatement equipment, whilst also ...


    By Gasmet Technologies Oy

  • Continuous Mercury Monitoring Benefits Cement Plants

    Antti Heikkilä from Gasmet Technologies highlights the challenges faced by mercury monitoring in cement kilns, and explains how a new continuous mercury monitoring system addresses these issues and provides process operators with an opportunity to improve environmental performance and demonstrate compliance with forthcoming legislation. Background The production of cement ...


    By Gasmet Technologies Oy

  • Technical Challenges of Continuous Mercury Emissions Monitoring

    Many pollutants such as CO2, NOx and SO2 have been monitored continuously already for decades. In the last years the awareness for the need to measure mercury has also grown, and continuous mercury monitoring is becoming more and more relevant. Especially industries burning coal, oil or waste, share the responsibility to monitor their mercury emissions. All measuring techniques need to be able to ...


    By Gasmet Technologies Oy

  • Mapping Quality Assurance Requirements for Continuous Mercury Monitoring Systems

    The Clean Air Mercury Rule (CAMR) requires coal-fired electric power plants to install and operate mercury  continuous monitoring systems by December 31, 2008 such that they will have 12 months of “submittable” data by 1 January 2010. For all practical purposes, “submittable data” are “quality-assured data” that meet the extensive quality control requirements cited in the various regulations that ...


    By Weston Solutions, Inc

  • Tekran instruments—monitoring around the world

    Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...

  • What you need to know about mercury emissions monitoring

    Gasmet Technologies (Finland) has published a new White Paper on the monitoring of mercury emissions to air from industrial processes. The Paper provides an overview of current initiatives to reduce mercury emissions and explains how continuous mercury emissions monitoring can help inform process control and the efficient operation of pollution abatement equipment, whilst also demonstrating ...


    By Gasmet Technologies Oy

  • Innovative emissions monitoring uptake soars

    Firms in the UK’s waste and power sectors are proactively seeking Best Available Techniques for emissions monitoring, according to Enviro Technology. Over recent months there has been a surge in demand for sophisticated equipment, such as monitors of total gaseous mercury. The air quality and emissions monitoring specialist believes that a combination of factors, such as the recast ...

  • How to Monitor Mercury Emissions

    In recent years, mercury levels in the environment and in the food chain have risen substantially mainly due to human activities. As a long-range pollutant it can affect areas located thousands of kilometers away from its original source of emission. It’s no wonder then that the regulatory pressure to monitor mercury emissions grows stronger.  Before diving ...


    By Gasmet Technologies Oy

  • Mercury free solutions for autoclave temperature monitoring

    Mercury is a naturally occurring element found in the air, water and soil however exposure to the substance, even in small amounts, can lead to severe health and ecosystem issues. Mercury in products can find it’s way into the environment in all sorts of ways such as manufacturing, spills, recycling and disposal. Due to the health risks posed products such ...


    By Camlab Limited

  • How to investigate mercury in the oceans?

    Mercury is a highly toxic metal that affects the environment and can endanger people's health, as a powerful neurotoxin. The combustion of coal, waste and fuel are releasing hundreds of tons of heavy metal into the atmosphere annually, and its sediment enters to soil and water. Mercury measurements are part of the EU project "Global Mercury Observation System". The long-term goal of this ...


    By Lumex Instruments Group

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Is there mercury in your industrial wastewater discharge?

    An assessment of sampling locations for three industrial wastewater effluent piping systems is presented. The assessments provided demonstrate that by installing sampling ports at the appropriate location along an effluent stream’s piping system, truly representative samples can be collected. These real and accurate results scientifically prove that a specific industrial wastewater ...


    By Practical Applications, Inc.

  • The application of Flow Injection Technology to automating cold vapor MERCURY analyses

    This document describes the application of flow injection technology to cold vapor mercury analyses. It can be obtained from PerkinElmer by requesting method number ENVA-100. Appendices 1 and 2 show letters from the US EPA indicating acceptability through the Alternate Test Program for both drinking water and wastewater sample analysis. 1.0 Scope and Application 1.1 This ...


    By PerkinElmer, Inc.

  • Continuing Challenge Hazmat – Booth 30

    Join Rick and Jeff at the Continuing Challenge Hazmat Workshop, booth 30, for a demonstration of our Jerome® mercury vapor analyzers and see the difference that an accurate, user friendly, reliable and durable mercury vapor analyzer can make.On display at the show: Jerome® ...


    By AMETEK Brookfield

  • The determination of total mercury in fish and agricultural plant materials using thermal decomposition and amalgamation coupled with atomic absorption

    Mercury has long been recognized as a serious global pollutant that has a significant impact upon our ecosystem. Unlike most other pollutants, it is highly mobile, non-biodegradable, and bio-accumulative and as a result has to be closely monitored to ensure its harmful effects on local populations are minimized. Approximately 50 tons of mercury particulates are emitted into the atmosphere every ...


    By PerkinElmer, Inc.

  • The determination of total mercury in soils and river sediments using thermal decomposition and amalgamation coupled with atomic absorption

    Mercury has long been recognized as a serious global pollutant that has a significant impact upon our ecosystem. Unlike most other pollutants, it is highly mobile, non-biodegradable, and bio-accumulative and as a result has to be closely monitored to ensure its harmful effects on local populations are minimized. Approximately 50 tons of mercury particulates are emitted into the atmosphere every ...


    By PerkinElmer, Inc.

  • The determination of total mercury in whole blood using thermal decomposition and amalgamation coupled with atomic absorption

    Mercury has long been recognized as a serious global pollutant that has a significant impact upon our ecosystem. Unlike most other pollutants, it is highly mobile, nonbiodegradable, and bio-accumulative and as a result has to be closely monitored to ensure its harmful effects on local populations are minimized. Approximately 50 tons of mercury particulates are emitted into the atmosphere every ...


    By PerkinElmer, Inc.

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By ENVEA

  • Continuous Emissions Monitoring of Total Mercury

    Over the past decades, mercury (Hg, quicksilver) has gone from being a versatile commodity used in everything from thermometers to herbicides, to a partially banned substance, which name alone signals environmental issues and health concerns. Today, much use of mercury has been phased out in favour of more environmental- and health-friendly substances, and the remaining circulation of mercury is ...


    By Opsis AB

  • Mercury Emissions From The Disposal of Fluorescent Lamps

    The Environmental Protection Agency (EPA) is making available to the public a study containing information relating to its Proposed Rule addressing the management of mercury-containing lamps under the Resource Conservation and Recovery Act Subtitle C hazardous waste management system published in the Federal Register on July 27, 1994, 59 FR 39288. The study consists of an electronic model and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you