mercury sludge Articles

  • Using FIMS to determine mercury content in sewage sludge, sediment and soil samples

    Tim Flow Injection Mercury System (FIMS) is a dedicated system that integrates flow injection mercury cold vapor generation with a very sensitive detector. The exceptional system stability and the long path measurement cell provide instrumental detection limits as low as 5 ng/L using a sample volume of 5(H) jxL. The improved sensitivity of the FIMS permits sample dilution, therefore reducing the ...


    By PerkinElmer, Inc.

  • The source and risks of mercury in the offshore industry

    Oil in Gas and RocksAlmost all oil and gas is found within the tiny spaces in sedimentary rocks, mainly sandstone and coarse-grained limestone. Bedrock limestone and sandstone, even though hard, also contain lots of pores that can contain water or oil or gas and other elements. Along with the gas and oil is a mixture of sand, silt & mud. This sludgy silt mud is rich in heavier metal elements ...

  • Pollutants in Urban Wastewater and Sewage Sludge

    Untitled Document Executive Summary Water policy in the European Union is aiming to promote sustainable water use and a major ...

  • Mercury recovery from industrial waste and toxic residues of natural gas drilling

    econ's client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake from waste water treat-ment. Among their most important clients are Shell, ExxonMobil, Wintershall ...


    By econ industries GmbH

  • How to treat radioactive NORM sludge with VacuDry

    NORM doesn’t sound like a big thing. But Naturally Occurring Radioactive Material might let the alarm bells ring. Everyone has heard of “radioactive material” and that sounds dangerous. However, most of this material is trapped deep in the ground beneath our feet. From there it reaches the surface, for example via the water cycle. Another possible pathway for NORM to reach the ...


    By econ industries GmbH

  • Ex Situ Biological Treatment for Soil, Sediment, and Sludge

    The main advantage of ex situ treatment is that it generally requires shorter time periods than in situ treatment, and there is more certainty about the uniformity of treatment because of the ability to homogenize, screen, and continuously mix the soil. However, ex situ treatment requires excavation of soils, leading to increased costs and engineering for equipment, possible permitting, and ...

  • Mercury mobility and availability in highly contaminated solid wastes from a chlor-alkali plant

    This article suggests an approach of sustainable development in Cuba based on the environmental impact assessment of mercurial sludge generated by a chlor-alkali Cuban plant. It consists of a study of mercury mobility and availability in the sludge samples using sequential extraction procedure. High values of total mercury content (2320 ± 40 mg/kg) in the sludge sample as well as in the ...


    By Inderscience Publishers

  • Mercury mobility and availability in highly contaminated solid wastes from a chlor–alkali plant

    This article suggests an approach of sustainable development in Cuba based on the environmental impact assessment of mercurial sludge generated by a chlor–alkali Cuban plant. It consists of a study of mercury mobility and availability in the sludge samples using sequential extraction procedure. High values of total mercury content (2320 ± 40 mg/kg) in the sludge sample as well as in the toxicity ...


    By Inderscience Publishers

  • Minimization of Major Air Pollutants from Sewage Sludge Fluid Bed Incinerators

    ABSTRACT Emissions of major air pollutants including carbon monoxide (CO), nitrogen oxides (NOx) and mercury (Hg) were studied at two sewage sludge fluidized bed combustion (FBC) plants. Both the North West Bergen (NWB) County Utility Authority and the Little Miami (LM) plants have air pollution control systems (APCS) that are of the wet type. Various operating conditions such as temperature, ...

  • econ VacuDry® technology proves successful for the treatment of NORM wastes

    Large amounts of drilling sludge containing low levels of natural radioactivity is a resultant by-product of the oil and gas production process. These so-called NORM-sludges (Naturally Occurring Radioactive Material) are often contaminated with both mercury and hydrocarbons. The econ industries VacuDry® technology is recognized in Germany as the first choice for the extraction of the mercury ...


    By econ industries GmbH

  • Minergy GFT Supplemental Sediment

    The purpose of the Study is to evaluate the economic and technical feasibility of melting PCB contaminated river sediments in a glass furnace. The Glass Furnace Technology (GFT) was developed by Minergy. Minergy originally developed vitrification technologies to process wastewater sludge into glass aggregate that could be sold as a commercial product. The technology was evaluated during a U.S. ...


    By Minergy Corporation Limited

  • Wastewater Metals Removal

    Industrial Wastewater Treatment Success Stories Wastewater Treatment Metals Removal Ton Nerve Gas Agent Container Rinse Waters ...


    By Integrated Engineers Inc.

  • EPA issues final rules for boilers

    The U.S. Environmental Protection Agency (EPA) reports that more than 200,000 boilers, process heaters and incinerators will be impacted by a set of Clean Air Act regulations issued on February 21, 2011. Since EPA first proposed the ...


    By Bergeson & Campbell, P.C.

  • Chlor-Alkali Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Landfill leachate treatment

    Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent ...


    By WesTech Engineering, Inc.

  • VacuDry Indirect heated vacuum thermal Desorption by econ industries - case study

    With the VacuDry8 technology the energy-efficient treatment of hazardous and industrial waste as well as contaminated soil, oil sludge and secondary raw material is realized. Controlled vacuum and heat are used to separate minerals from oil, solvents, mercury and other hazardous substances.    At the core of the econ VacuDry8 process is a specially designed dryer chamber which ...


    By econ industries GmbH

  • How Wastewater Optimization Saved $50k for Corrugating Conversion Facility

    Paper & Pulp Box Company Corrugating Facility Wastewater Optimization This corrugating company did not have an existing pretreatment system. Wastewater from their converting and corrugating ...


    By Integrated Engineers Inc.

  • Water pollution · Canarina DESCAR software

    Natural waters contain micro-organism as well as solutes. There is a distinction between ‘pure’ water, meaning water that is fit to drink and pure water that is a single substance. A water pollutant is a substance that prevents the use of water for a specified purpose. The signs of polluted water are obvious. Poor drinking water tastes and smell bad. ...

  • Properties and Behavior of Inorganics in Contaminated Soil

    Often, specific technologies may be ruled out, or the list of potential technologies may be immediately narrowed, on the basis of the presence or absence of one or more of the chemical groups. The relative amounts of each may tend to favor certain technologies. Metals may be found in the elemental form, but more often they are found as salts mixed in the soil. At the present time, treatment ...

  • An Introduction to Bioremediation and its Applications

    A variety of toxic chemicals, metals, and effluents are created and used in industrial processes. These elements need to be degraded to ensure that they do not harm the environment when disposed. A specialized process and equipment are required to perform this task. This is where bioremediation comes in. What is Bioremediation, and what are its Types? In simple ...


    By HPI Processes, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you