mercury vapor sampling Articles

  • Increase Mercury Vapor Detection Range by 10X

    Vapor dilution module extends detection range of J505 from nanograms to milligrams How it works: The new 10:1 dilution module for the J505 reduces the concentration of mercury vapor in the sample stream by a factor of ten, allowing for a much higher detection limit. Rather than the standard upper detection limit of 500 µg/m3, ...


    By Arizona Instrument LLC

  • The application of Flow Injection Technology to automating cold vapor MERCURY analyses

    This document describes the application of flow injection technology to cold vapor mercury analyses. It can be obtained from PerkinElmer by requesting method number ENVA-100. Appendices 1 and 2 show letters from the US EPA indicating acceptability through the Alternate Test Program for both drinking water and wastewater sample analysis. 1.0 Scope and Application 1.1 This ...


    By PerkinElmer, Inc.

  • Mercury Analysis

    Characteristics of Mercury What is Mercury? Mercury is a naturally occurring silver-colored metallic element noted for its occurrence as a liquid at room temperature and toxic to living organisms. This silvery, opaque liquid metal is very dense, yet has a high surface tension that causes it to form tiny perfect spheres in the pores of the rocks it is found in. It is ...


    By HORIBA Europe GmbH

  • Using FIMS to determine mercury content in sewage sludge, sediment and soil samples

    Tim Flow Injection Mercury System (FIMS) is a dedicated system that integrates flow injection mercury cold vapor generation with a very sensitive detector. The exceptional system stability and the long path measurement cell provide instrumental detection limits as low as 5 ng/L using a sample volume of 5(H) jxL. The improved sensitivity of the FIMS permits sample dilution, therefore reducing the ...


    By PerkinElmer, Inc.

  • Detecting Mercury in Water

    Determination of Mercury (Hg) in Water by Hand-Held, Portable Cold Vapor Atomic Fluorescence SpectrometryWater is the most familiar and most abundant compound on Earth, making up 71% of its surface area.[1]It is a vital component for all known forms of life and is the aquatic habitat for thousands of species of microalgae, fish and shellfish. [2] With the presence of running water in our ...


    By Arizona Instrument LLC

  • How to Monitor Mercury Emissions

    In recent years, mercury levels in the environment and in the food chain have risen substantially mainly due to human activities. As a long-range pollutant it can affect areas located thousands of kilometers away from its original source of emission. It’s no wonder then that the regulatory pressure to monitor mercury emissions grows stronger.  Before diving ...


    By Gasmet Technologies Oy

  • Determination of mercury speciation in fish tissue with a direct mercury analyzer

    Knowledge of mercury speciation in tissue is valuable for assessing potential toxicological effects in fish. Direct mercury analyzers, which use thermal decomposition and atomic absorption spectrometry, have recently gained popularity for determining organic mercury after procedural solvent extraction from some environmental media, although quantitative recovery from lipid‐rich materials, such ...


    By John Wiley & Sons, Ltd.

  • Determination of mercury with on-line addition of stannous chloride uUsing an axial ICP-OES

    Mercury is one of the most toxic heavy metals in the environment. It is therefore important to routinely monitor the Hg level in many types of samples. The US EPA approved methodology for the determination of Hg uses the cold vapor technique with stannous chloride as the reducing agent1. This methodology is applicable to Hg determinations in a range of waters (drinking, ground, surface, sea and ...


  • The determination of mercury at ultratrace levels using FIMS and amalgamation technique

    The PerkinElmer Flow Injection Mercury System (FIMS) is used in combination with an amalgama¬tion preconcentration technique to determine Hg at ultratrace concentrations. Using a 10-mL sample volume, the instrumental detection limit is 0.3 ng/L. The method detection limit obtained in drinking water is 1.0 ng/L with a spike recovery of 100 ± 4%. The operating conditions for the ...


    By PerkinElmer, Inc.

  • Long-term Atmospheric Mercury Wet Deposition at Underhill, Vermont

    Section 112(m) of the 1990 Clean Air Act Amendments, referred to as the Great Waters Program, mandated an assessment of atmospheric deposition of hazardous air pollutants (HAPs) to Lake Champlain. Mercury (Hg) was listed as a priority HAP and has continued to be a high priority for a number of national and international programs. An assessment of the magnitude and seasonal variation of ...


    By Springer

  • Measuring total mercury due to small-scale gold mining activities to determine community vulnerability in Cihonje, Central Java, Indonesia

    This research is comparative study of gold mining and non-gold mining areas, using four community vulnerability indicators. Vulnerability indicators are exposure degree, contamination rate, chronic, and acute toxicity. Each indicator used different samples, such as wastewater from gold mining process, river water from Tajum river, human hair samples, and health questionnaire. This research ...


    By IWA Publishing

  • Relative Accuracy Testing of an X-Ray Fluorescence-Based Mercury Monitor at Coal-Fired Boilers

    ABSTRACT The relative accuracy (RA) of a newly developed mercury continuous emissions monitor, based on X-ray fluorescence, was determined by comparing analysis results at coal-fired plants with two certified reference methods (American Society for Testing and Materials [ASTM] Method D6784-02 and U.S. Environment Protection Agency [EPA] Method 29). During the first determination, the ...

  • The determination of total mercury in whole blood using thermal decomposition and amalgamation coupled with atomic absorption

    Mercury has long been recognized as a serious global pollutant that has a significant impact upon our ecosystem. Unlike most other pollutants, it is highly mobile, nonbiodegradable, and bio-accumulative and as a result has to be closely monitored to ensure its harmful effects on local populations are minimized. Approximately 50 tons of mercury particulates are emitted into the atmosphere every ...


    By PerkinElmer, Inc.

  • Air Monitoring Information to Aid in the Assessment of Potential Human Health Risk from an Ongoing Landfill Fire

     Abstract The North Carolina Division of Air Quality (DAQ) was asked by the Occupational and Environmental Epidemiology Section (OEES) of the North Carolina Department of Health and Human Services to provide air monitoring information to aid in the assessment of potential human health risk from an ongoing landfill fire in Dare County. The Air Toxics Analytical Support Team (ATAST) arrived ...


  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • Organic Strategies for Today`s Business Environment

    In Today’s Business Environment, Successful Businesses Use Organic Strategies To Add Value Organic Strategies Assure Businesses Minimize Risk, Maximize Value And Optimize Performance while achieving hit ratios in excess of 90% Today’s globally transparent business environment, feeding off the information highway, has brought an end to some traditional business/sales theories. In a global ...


  • Recent Federal Developments

    TSCA/FIFRA EPA Extends Comment Period For Draft Guidance For Pesticide Registrants On Notifications, Non-notifications, And Minor Formulation Amendments: On October 5, 2017, the U.S. Environmental Protection Agency (EPA) issued a notice of extension of the comment period for the draft guidance  ...


    By Bergeson & Campbell, P.C.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you