metal briquetting Articles

  • Briquetting systems for wood and metal

    Almost 30 years ago the Zaisertshofen-based RUF GmbH & Co. KG specialized in the development and production of briquetting systems. What started with a press for briquetting bark, has become a versatile and internationally active company over the years. RUF GmbH & Co. KG manufacture their briquetting systems in Germany. Their manufacturing and design divisions make it possible to respond ...

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Why Briquetting Machines are Favorite of Recycling Industries?

    With the increasing attention towards proper waste recycling, there has been huge requirement of right machines and tools to properly convert waste into useful things. One of the best solutions companies and individuals got was briquetting plant for effective recycling of wood as well as metal waste. What is the major process at the recycling company: to collect waste; to segregate different ...


    By Jay Khodiyar Machine Tools

  • Turn Waste Materials Into Useful Products With Briquetting Machines

    In today’s world, any approach that aims towards reducing pollution through renewable energy must be appreciated. The use of Briquetting machines is such an approach. The fate of fossil fuel is well known, and their resources are fast getting depleted from all corners of the world. Thus, ways to exploit alternative energy resources that are renewable and lessen our dependence on fossil ...


    By Jay Khodiyar Machine Tools

  • Significant increase in the value of aluminium swarf thanks to briquetting process - Case Study

    The GLEICH group increases its profitability by compressing 3,800 tonnes of swarf each year Should you just send the metal swarf created during manufacturing to the scrap dealer or should you increase its value by selling it for profit? The GLEICH group discovered the answer to this around ten years ago. Since then, the family-run business has been turning its aluminium swarf into ...

  • Roll-press briquetting helps Iowa lime producer retain previously wasted fines as valuable product case study

    Adding a new 550 tpd rotary kiln more than doubled lime production capacity at Linwood Mining and Minerals Corporation's Buffalo Plant, located near Davenport, IA...but it also raised the problem of what to do with a greatly increased output of fines. Realizing that landfilling its plant property with waste fines at rates of up to 100 tpd would not be a good long-term solution, the company not ...


    By K.R. Komarek Inc

  • Engine part production department of MAN Diesel improves its productivity - Case Study

    RUF briquetting presses contribute to the success The powerful ship engines and power generators of the MAN Diesel Group are renowned for their reliability all over the world. Given the full order books, the future of the company looks very bright. To cater for the continued growth, the company is extending is production facilities in Germany on an on-going basis, thus further increasing ...

  • Recovering oil from grinding sludge - Case Study

    Zahnradfertigung Ott uses RUF briquetting unit A large volume of sludge is produced in the grinding of high-precision gears. In most cases, this grinding sludge is disposed of at high costs. Zahnradfertigung Ott, a specialist manufacturer of gears, found a better solution: since 2005, the company is using a briquetting unit from RUF to recover 500 litres of grinding oil per day from the ...

  • Domestic Development of Dry Powder Ball Pressing Machine

    Dry powder ball pressing machine is a kind of mix powder material powder or granular material is compressed into the ball equipment, widely used in metallurgy, coking, mining, coal, electric power and other industries, can be of aluminum and alumina powder, ferric oxide powder, coke crumbs, limestone powder, crystal and other granular materials are pressed into the ball. After pressed pellets can ...

  • Zero waste solutions, Slovakia

    When US Steel acquired the former East Slovakian Steelworks in Nov 2000, it initiated a program to clear the residual mill waste dump which had accumulated on site in previous years. US Steel intended to recover the metal from the iron-rich by-products, and also improve environmental performance. Harsco has a proven record of experience in recycling iron and steel making by-products. In Slovakia, ...


    By Harsco Metals & Minerals

  • Successful Premiere of PET Briquettes - Case Study

    No-one at Repasack in Oberhausen is prepared to part with their HSM BRP 4810 briquetting press: the machine presses twice as fast as its predecessor, compresses the material to a thirtieth of its initial volume and so far it has not had any operational faults. At the large counting centre for disposable packaging made from PET, aluminium and tin there was a positive summary regarding the first ...


    By HSM GmbH + Co. KG

  • From high-volume aluminium swarf to compact briquettes - Case Study

    Ruf briquetting machines help Trumpf increase output in laser component manufacturing. In order to ensure the highest possible output and productivity when machining aluminium, for the last two-and-a-half years Trumpf's laser components production unit has been operating as a fully-automated machining centre. It can operate unmanned for up to 60 hours, but to do this it needs both robots ...

  • Wood Waste SPB Moulds - Case Study

    A mould-making factory in Stoke on Trent is making and saving money since purchasing a briquetting machine from Gross UK and a wood waste heater from Wood Waste Technology. Since 2008, Stoke on Trent company SPB Moulds has made patterns for metal casting, and supplies foundries across the UK. Whilst looking at ways to reduce business costs, the team spotted an opportunity in the market to supply ...


    By Wood Waste Technology Ltd

  • Hydrocarbon evaporative emissions & control for automotives

    Even the cleanest and most efficient vehicle on the market today still pollutes the air and otherwise damages the environment. Motor vehicles emit several noxious pollutants which vehicle emissions standards are designed to regulate. Vehicles generally emit Hydrocarbons (HC), Carbon monoxide (CO), Nitrogen oxides (NOx) and Fine airborne particulate matter (PM) as pollutants that require control. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you