metal locating Articles

  • Confirming Natural Attenuation Processes at a Coastal Site - Case Study

    Past waste disposal practices at a California coastal site resulted in a groundwater plume containing CVOCs (mainly chlorinated ethenes [CEs] and 1,1-dichloroethane) migrating offshore towards a marine harbor. CVOCs are present in the sediment porewater adjacent to the shoreline, but concentrations decreased significantly between 2000 and 2015, and NA in the marine sediments was suspected. To ...


    By SIREM

  • Aluminum recycling at Centro Rottami, Italy - Case Study

    Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials – The showcase of Centro Rottami. Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials. In fact, as much as 90% of the aluminum produced in the country comes from recycling, and is identical to ...


    By TOMRA Sorting GmbH.

  • Rhode Island Wastewater Plants Key To Water Quality Reversal

    Despite evidence that often points to the contrary, many bodies of water around the country stand as prime examples of how environmental quality can be improved with the proper will and effort. Take, for instance, Narragansett Bay, located on the north side of the Rhode Island Sound. Located near some of America’s oldest settlements, the bay has ...


    By KLa Systems, Inc.

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • From a 1m3 cubitainer to 50mm chips, using a two-shaft shredder? With SatrindTec, “Sí, es posible!”

    A Spanish manufacturer of HPDE cubitainers and containers based in Cataluña has chosen SatrindTech to implement its recycling line of defective cubitainers. The request received by our Sales Department was to replace an existing SatrindTech twin-shaft shredder, in use since the mid-1990s, to now be able to ensure a regular size of the shredded material. ...


    By SatrindTech Srl

  • LIMS Locates the Diamond in the Rough

    From the earliest days of digging into the earth for minerals, one question has been raised by all those seeking to make use of the materials the earth offers up:  what exactly have we dug up and is it what we hoped it would be?  Well we’re not panning for gold anymore and hoping for a glint of something shiny at the bottom of our pans, unless we hobbyists.  Modern ...

  • Locating pipes and cables case study

    GPR can be used to determine the location and depth of metallic, non-metallic, plastic, concrete and asbestos-concrete utilities, and cables (power, signal, etc.) Locating of  City Utilities The VIY3-300 GPR was used for locating of city utilities (water, gas, sewer, etc.). This profile shows city utilities at a depth of 1.2 and 2.0 meters (wave speed is 130 meters per ...


    By Transient Technologies LLC

  • NEC Classifications and Divisions for Hazardous Locations

    Electrical equipment in hazardous (classified) locations present a serious threat for workers due to the existence of explosive dust and vapors. Examples of such facilities range from grain mills and gasoline stations to aircraft hangars and chemical manufacturing plants. To prevent devastating explosions that may occur from the ignition of combustible particles in the atmosphere, the National ...


    By Larson Electronics LLC

  • Utilizing a Multiple Metal Detector Array for Locating Anomalies Indicative of Ferrous and Non-Ferrous OE/UXO

    ABSTRACT An array of three Geonics Limited EM61-MK2 metal detectors was utilized to identify subsurface metallic anomalies at the Mare Island Naval Shipyard in Vallejo, California. The goal of the 120-acre survey was to locate anomalies indicative of ferrous and nonferrous ordnance and explosives/unexploded ordnance (OE/UXO) in dredge pond berms with particular attention to 20 mm high explosive ...


    By Weston Solutions, Inc

  • Utility locating at a Gasoline station case study

    As part of an Phase II Environmental Site Assessment at a gasoline station, GeoView was tasked with locating and mapping the  utilities within the boundaries of the property. The utilities included electrical lines, communication lines, PVC and metal water lines, sewer lines and fiberglass fuel lines. The property did not have any as-builts to reference. As standard procedure, GeoView ...


    By GeoView, Inc.

  • Locate buried monitoring wells case study

    A Phase II Environmental Site Investigation was being conducted at a gasoline station in Fort Myers, Florida. In order to minimize costs, our client intended to use several existing on-site monitoring wells rather than installing new wells. However, five of the existing wells had been covered with asphalt and were no longer visible. GeoView was tasked with performing a shallow geophysical study ...


    By GeoView, Inc.

  • Multiple location integrated management plan case study

    A multiple location restaurant chain was challenged by increasing costs from their waste hauler and a lack of response regarding service concerns and pricing questions. The RecycleSmart Solution RecycleSmart worked with the existing service provider to complete a full inventory of all locations, right sizing of waste bins for each location and developing schedules to fit the ...

  • Scanning proposed borehole locations for Utilities case study

    Environmental and engineering firms often are tasked with performing soil borings for monitor well installation as part of a Phase II Environmental Site Assessment. This task becomes more challenging when the borings are to be installed in gasoline stations, right of ways or other areas where there are numerous underground utilities that are either unmarked or not properly located. GeoView can ...


    By GeoView, Inc.

  • Sorting plants for industrial waste, location: south of Germany

    Task Separation and sorting of industrial and building site waste as well as bulky refuses. Potential recyclables such as wood, paper, plastics, metals and aluminium shall no longer be sent to garbage incineration, but can be recycled after the sorting into different material fractions. Solution Conception and realisation of a complete  industrial waste ...


  • Utility Locating and Mapping at a Power plant case study

    An expansion was planned at a power plant in west central Florida. As part of the design build plan, all of the utilities within the proposed building footprint had to be located and mapped. There were two phases of the investigation. Utility designation was the first phase. This involved studying existing as-builts, performing site walkthroughs with plant personnel in order to ascertain a ...


    By GeoView, Inc.

  • Portable lead analyzer to locate source of lead

    OBJECTIVE: To investigate the sources of lead in the environment in children with elevated blood, with the help of a Field Portable X-Ray ...

  • Locate abandoned production abandoned well case study

    Clearwater, Florida Historical records discovered during construction of a commerical building indicated that a deep well with steel casing was likely present within a portion of the project site. Regulatory officials halted construction and insisted that the presence (or absence) of the well be confirmed. If the well was present, it was required that the well be exposed so that it could ...


    By GeoView, Inc.

  • A case study of some lakes located at and around Thane City of Maharashtra, India, with special reference to physico-chemical properties and heavy metal content of lake water

    The increasing trend in concentration of metals in the environment has created considerable attention amongst ecologists globally during the last decades. However, no such studies have been carried out in India and there are no past metal load data available. Therefore, we initiated a study to estimate the levels of water pollution of the Upavan, Masunda, Makhmali and Rewale Lakes situated at ...


    By Inderscience Publishers

  • Impact assessment of pollution in some lake water located at and around Thane City of Maharashtra, India: physico-chemical properties and toxic effects of heavy metal content

    Most of the fresh water bodies all over the world are getting polluted day by day, which has become a burning issue of present time. Hence their regular monitoring is crucial for the well-being and health of the surrounding population. Therefore in the present investigation, we carried out a systematic study to estimate the physico-chemical parameters and level of toxic heavy metal content in the ...


    By Inderscience Publishers

  • Re-location and re-design of non-ferrous separation plant case study

    Challenge: Old plant using eddy current separators for non-ferrous waste. System was underperforming and needed to be moved. Axion Solution: Axion redesigned new plant layout using existing ECS units and adding one reconditioned unit. Plant rebuilt using 35% scrap materials. On-site performance tests ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you