metal monitoring equipment Articles

  • Monitoring heavy metals for compliance with RoHS and WEEE directives

    The rapid expansion in the quantity of used electronic and electrical appliances has created a need to safely dispose of the used equipment. The European Community has introduced regulations to enforce limits on the amount of toxic metals and organic chemicals used in the production of material. Compliance with the regulations will help prevent hazards for future generations when the equipment is ...


  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Garden Street Iron & Metal Processes 8,000 Tons of Scrap Each Month Using Variety of Eriez Recycling Equipment

    Problem: Garden Street Iron & Metal recycling complex, located just west of downtown Cincinnati, OH, has been owned and operated by the Weber family for more than five decades. The complex, set on 22 acres with three nearby rail spurs in Spring Grove, is a beehive of activity as both consumers and businesses truck in ferrous and nonferrous metal for re-processing. To remain on the ...


    By Eriez Magnetics Europe Ltd

  • Heat treatment of steels and other metals case study

    Application Moisture is measured in the blanketing gases that are used in the treatment of steel. Problem Inert blanketing gases are required during the heat treatment of steels to prevent oxidation of the metal product. At heat-treating temperatures, moisture and oxygen will readily react with the metal to form an undesirable metal-oxide coating on the ...

  • Monitoring - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Determination of Wear Metals and Additives (Soaps) in Lubricating Oils by Atomic Absorption

    Lubricating & hydraulic fluids are crucial to the proper functioning of many types of machines: automobiles, farm equipment, heavy-duty motors, airplanes, and military hardware. Most “lubes” are simple hydro-carbon based oils or greases that have certain additives in them to prevent wear and abrasion of components (piston rings, bearings, etc.) or oxidation degradation of the oil. These additives ...


    By Buck Scientific Inc

  • Improved monitoring of citric acid level

    MonoScan improves level monitoring of citric acid processing by providing advanced non-contact ultrasonic level measurement solution for Israel's leading provider of food additives. GBI, is a world known provider of citric acid for the food industry. The company supplies citric acid (HOOCCH2C) and other food additives ...

  • Case study - Silicone converter succeeds with custom air pollution control equipment

    Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right air pollution control system. Among the air pollution control choices available to ...

  • The challenges and benefits of local air quality monitoring

    A new generation of air quality monitors is now being offered to provide localised, real-time air quality readings – but the potential benefit is only just starting to be realised. It is generally accepted that whilst measurements from air quality reference stations are highly accurate, they are not sufficiently location-specific. Key pollutants – such as NO2 and PM2.5 ...


    By AQMesh

  • Intraurban variability of Ambient PM Arsenic and other air toxics metals case study

    The Missouri Department of Natural Resources (MoDNR) and Washington University participated in a project to collect and analyze air toxics metals data. It was funded through a Community Air Toxics Grant from the U.S. Environmental Protection Agency (USEPA). The study grew out of the southside St. Louis Community Air Project (CAP) which identified six hazardous air pollutants of concern including ...


    By Cooper Environmental

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • Optimized Pipediver Platform Making Waves As Advanced Condition Assessment Tool For Metallic Pipes

    Pure Technologies (Pure) never says no to an engineering challenge. If a client has a particular pipeline assessment or monitoring challenge to overcome in order to make a rehabilitation decision, we’ll do whatever it takes to help ...


    By Pure Technologies

  • Monitoring of typical pumps and aerator in a water treatment plant - Case Study

    Equipment, Context: Surface aerator:Vertical equipment, gearbox associated very high cost for wired solution, aggressive environment, very few visual and periodical inspections. Centrifugal pump: Located underground in concrete basement, busy area, pipes and metal structure all around. Effluent pump: Vertical equipment, ...


    By Wi-Care

  • Water Level Monitoring and Control Solutions for the UK Internal Drainage Boards

    Pulsar Process Measurement have been involved in design, manufacture and supply of non-contacting Ultrasonic Level and Pump Control systems for the Internal Drainage Board industry for many years. Three typical examples of the application of this equipment are installed at North Level IDB Cross Guns Pumping Station. The original Cross Guns Pumping Station was built in 1938 to house three 760mm ...

  • Monitoring level of fuel and diesel oil in cylindrical tanks case study

    SmartScan 50L delivers a reliable measurement solution for monitoring fuel and diesel oil in a municipal Central Post Office. This Post Office provides postal services throughout the country. To provide its services around the clock, the office invests huge efforts in maintaining its building at the highest standards. The problems The Central Post Office uses fuel oil for ...

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • RoHS/WEEE compliance

    Monitoring heavy metals has never been more in the spotlight. Recent legislation in Europe and Asia looks set to keep it that way. This article outlines the impact of the new regulatory environment on suppliers of the many plastic components used in electrical and electronic equipment and provides an insight into how X-ray fluorescence (XRF) spectrometry can provide a solution for screening and ...


    By PANalytical

  • Surface Water Treatment Industry - Case Study

    “The surface treatment industry itself exists to produce durable products and to spare the environment.“ K. Hartwall Ltd. is an enterprise in the metal industry with net sales of approximately 20 million euro. The company is well known for its innovative carriage products used in the transport and storage of goods, especially foodstuffs. The primary material in carriages is steel, ...


    By Watman Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you