metal recycling industry Articles

  • New ways for Metal Recycling

    REWAVE XRF 3-way-sorting in innovative  “Free-Fall”-design Recycling of metal and aluminium knows no limits because it can be remelted as scrap indefinitely. Metals, however have to be separated from non-metallic impurities, and different metals have to be sorted in pure fractions to be used as secondary raw materials substituting primary resources. Especially when it ...

  • Treatment and Disposal of Air Pollution Control Residue

    What is APCr? Thermal waste management using Energy Recovery Facilities (ERFs) is now a well-managed and mature technology that is subject to environmental monitoring by a range of competent international bodies. These ERFs have been established as a means of diverting waste away from landfill disposal and for valorising the material and energy content of the waste. Counter to historic ...

  • Tire Shredding: The Best Alternative

    From cars and trucks to planes, tractors, and forklifts, tires are used for a wide variety of vehicles. And those tires don’t last forever. Regardless of how many miles a tire travels, it should not be used longer than ten years past its manufacture date, as the rubber will grow brittle and can crack. This isn’t usually a problem, though, since most tires are replaced within three or ...


    By ECO Green Equipment

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Snapshot of metals recycling in South Africa

    South Africa is a country of contrasts. Rich and poor, urban sprawl and open countryside, mountains and coastal regions, different racial groups - all co-exist in a country the size of Europe.  With a growth rate of 5% in 2006, the country’s economy is doing well. However, South Africa is facing many problems. One of the biggest is its unemployment rate which, according to 2006 government ...


    By Recycling International

  • Metals & Finishing Industrial Wastewater Treatment

    Industrial Wastewater Treatment Success Stories Metals and Finishing Industrial Wastewater Treatment Aircraft Components - 80% Cost Reduction ...


    By Integrated Engineers Inc.

  • East coast metal treatment facility recycles wastewater

    Evaporator/Crystallizer Solves Pollution Problems The Facility A major industrial Fortune 500 company manufactures armored-tracked vehicles for the U.S. Army. The plant is located in York County, Pennsylvania. The Problem Aluminum and steel assemblies and parts undergo chemical dip and spray treatments before painting. The ...

  • Identification and control of safety and health hazards in metal scrap recycling

    The audience for this guide is anyone who works in the metal scrap recycling industry—employers, employees, safety professionals, and industrial hygienists—should read this publication. This guide can help you identify and manage the hazards associated with exposure to various metals and processing chemicals and with related processes and equipment used in metal scrap recycling operations. Why is ...

  • UNTHA optimises WtE production and metal recycling at Turkish paper mill

    An UNTHA shredder is now fully operational in Turkey’s first solid waste incineration plant. The single step XR3000C has transformed Modern Enerji’s approach to metal recycling, at the same time as boosting the production of ...


    By UNTHA Shredding Technology

  • Environmental impact of recycling metals from ships: a life cycle assessment

    New research has examined three different categories of Ecological Risk Assessment (ERA), each with different goals. The researchers find that overlaps between the three assessments could be combined to create a more comprehensive form of ERA, usable by regulators and environmental decision makers. Life cycle assessment (LCA) can measure the environmental impact of the different stages of a ...

  • Why Briquetting Machines are Favorite of Recycling Industries?

    With the increasing attention towards proper waste recycling, there has been huge requirement of right machines and tools to properly convert waste into useful things. One of the best solutions companies and individuals got was briquetting plant for effective recycling of wood as well as metal waste. What is the major process at the recycling company: to collect waste; to segregate different ...


    By Jay Khodiyar Machine Tools

  • How an Industrial Trash Compactor Contribute in Recycling Process

    Trash compactors are rather popular among those who are interested in recycling. There are personal trash compactors that can be used in individual households, and there are industrial trash compactors. An industrial trash compactor is used extensively at recycling plants. They are essential for handling the large quantities of scrap metal that comes for processing on a daily basis.  Why do ...

  • Industrial container recycling simplified by oil skimmer

    Barrel Reconditioning Industries (BRI) of Cottage Grove, MN builds recycling systems for both metal and plastic containers, including lubricating fluid drums and barrels. A typical BRI system consists of several integrated machines or stations, including a solvent preflush and a high pressure water wash. The water wash presents two distinct problems. First, oil and grease contaminated wash water ...


    By Abanaki Corporation

  • Aluminum Recycling

    The Customer The Company is one of the largest producers of aluminum. They conduct business worldwide and serve the aerospace, automotive, building, construction, commercial transportation, consumer electronics, oil & gas, packaging and industrial products & services markets. Aluminum is infinitely recyclable and 75% of all aluminum ever produced is still in use today. ...

  • Oil and metal recovery from mill scale and grinding swarf for the metal industry - case study

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012. Our client is a medium-sized company operating in the field of waste recycling and ...


    By econ industries GmbH

  • Heavy Metals in Vehicles II

    Untitled Document Executive Summary Directive 2000/53/EC on End-of-Life Vehicles aims at the prevention of wastes from vehicles and at the reuse, recycling ...

  • Heavy Metals in Waste

    Untitled Document Summary and discussion The aim of this report has been to demonstrate the existing knowledge regardng the harmful effects of heavy metals, the ...

  • Wastewater Metals Removal

    Industrial Wastewater Treatment Success Stories Wastewater Treatment Metals Removal Ton Nerve Gas Agent Container Rinse Waters ...


    By Integrated Engineers Inc.

  • Impact supports the plastic recycling industry to improve product quality

    Impact Air Systems were recently contacted by a well established metal recycling company who had installed a plastic recycling facility at their 32 acre site in Lincolnshire. Blue Sky Plastics Ltd installed a plastic recycling system to recycle household rigid plastic material and plastic car components and needed to further improve the quality of the HDPE and PP granules by removing the ...


    By Impact Air Systems

  • Remove My Car stands up for vehicle recycling industry

    Vehicle recycling expert Remove My Car is standing up for the ELV (End of Life Vehicle) industry at a time when the reputation of vehicle recyclers has been put under national scrutiny by the International Roundtable on Auto Recycling in Japan. The company believes the vehicle recycling industry in the UK is cleaning up its act, helped along by recent legislation, and that it no longer ...


    By Remove My Car

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you