metal scrap mill Articles

  • Scrap Metal Prices Soaring - Time to Start Demolition

    Now may be the time for you to start that demolition project with ferrous and non ferrous metals rising to new heights.  During demolition, scrap metals such as steel, copper, stainless steel and other metals are collected for recycling.  The revenue generated by these recycling efforts can help offset the costs of demolition.  In many cases, the value of the scrap metals ...

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Rotomite dredging iron mill scale-case study

    Crisafulli's Rotomite-6000. Dredging highly abrasive mill scale. Customer: The customer purchased its first SRS Crisafulli Rotomite, a Model 180P, in August 1997, and purchased its second Rotomite, a 6000 model, in the summer of 2007. Application and reason for dredging: The customer provides slag processing, metal recovery, material ...


    By SRS Crisafulli, Inc.

  • Mini Steel Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • U.S. Steel Industry can use those scrap Firestone tires for fuel!

     Leroy Stebbing, a Professional Engineer and forty-year veteran of the steel industry has patented a process for using scrap car and truck tires as a supplemental fuel for melting steel in steel mills. Tires are a valuable addition to the steel process because they add chemical energy and steel to the mixture going into the melting furnaces, he says. The use of tires can improve emissions ...


  • Crisafulli’s rotomite-6000 dredging highly abrasive mill scale

    Customer: The customer purchased its first SRS Crisafulli Rotomite, a Model 180P, Serial #14123 in August 1997, and purchased its second SRS Crisafulli dredge, a Rotomite-6000, in the summer of 2007. Application & reason for dredging: The customer provides slag processing, metal recovery, materials handling, scrap management, surface conditioning (“scarfing”) and a wide ...


    By SRS Crisafulli, Inc.

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

  • Electrosteel: slow growth, great future

    Last year, ferrous scrap accounted for 44% - or some 425 million tonnes - of the metallic raw materials used worldwide in steel production. The balance was made up of iron ore, tonnages of which far exceeded scrap although its ferrous content is, of course, much lower. Of those 425 million tonnes, three-quarters was used in electric arc furnaces (EAFs) operated by the so-called ‘mini-mills’ and ...


    By Recycling International

  • Plant gains efficiency by replacing vacuum-truck process

    A steel min-mill located in Portage, Ind., that produces and sells hot-rolled steel in the north central United States and Canada. The plant produces about 700,000 tons a year and employs about 400 people. On site is an electric arc furnace melt shop that produces continuous-cast steel slabs and a hot-strip rolling mill for further processing of slabs into rolled coils. The mini-mill's raw ...


    By Oil Skimmers, Inc.

  • Screen classifying cutter allows recycling of tungsten heavy alloys

    Aerojet Ordnance Tennessee, a wholly owned subsidiary of aerospace and defense contractor Aerojet General, fabricates parts from tungsten heavy alloys and other refractory metals for defense-related products like ammunition, warheads and electronic shielding. The company also produces components for sporting goods and other end-uses, though defense accounts for about 80% of its business. ...

  • America Chung Nam: committed to the paper loop

    China is not only the worlds biggest importer of scrap metals, it also hold this position with recovered paper. To satisfy its paper mills, China has to import huge volumes of recovered paper because the country is poor in forests to produce pulp and because domestic paper collection is still in its infancy. The world’s biggest exporter of recovered paper to China is America Chung Nam. With ...


    By Recycling International

  • Iron and Steel Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that were once abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain subs tances ...


    By Oil Skimmers, Inc.

  • Action Recycling-Milwaukee Plastic Sorting case study

    Customer Action Recyclers is a rapidly growing recycling company in Milwaukee which was founded in 2005. The company now employs    more than 30 employees and owns several recycling centres. Requirements PET and PE are to be recycled from a mixed fraction (60% PE/PET and 40% other materials such as other plastics, wood, paper, etc) with a grain size ...

  • Recovering oil from grinding sludge - Case Study

    Zahnradfertigung Ott uses RUF briquetting unit A large volume of sludge is produced in the grinding of high-precision gears. In most cases, this grinding sludge is disposed of at high costs. Zahnradfertigung Ott, a specialist manufacturer of gears, found a better solution: since 2005, the company is using a briquetting unit from RUF to recover 500 litres of grinding oil per day from the ...

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

  • Significant increase in the value of aluminium swarf thanks to briquetting process - Case Study

    The GLEICH group increases its profitability by compressing 3,800 tonnes of swarf each year Should you just send the metal swarf created during manufacturing to the scrap dealer or should you increase its value by selling it for profit? The GLEICH group discovered the answer to this around ten years ago. Since then, the family-run business has been turning its aluminium swarf into ...

  • Wood recycling is cornerstone of new Tallahassee C&D facility

    For better than four decades, the Williams family, owners of Marpan Supply, Inc., have been in the container services business in and around the Tallahassee area. And for the last 15 years or so, steady area growth meant that waste stream has been heavy with construction & demolition (C&D) debris. Seeing that, prompted Kim Williams, son of Marpan's owner and founder, to question the logic ...


    By Morbark, LLC

  • New Recycling Era for NYC

    Untitled Document New 20-year contract between the city and large-scale recycler ...


    By BioCycle Magazine

  • Optimisation of Binder and Catalyst Addition: Steel Castings Pty Ltd

     Steel Castings Pty Ltd installed a computerised ‘Autocat’ system to control the addition of catalyst and binder for the production of sand moulds. The finer control of addition rates has significantly reduced the number of reject moulds and achieved annual savings of $21,780 from reduced raw sand and chemical costs. Background Steel Castings Pty Ltd operates a foundry ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you