metal separation Articles
-
Case study - Plant for ash treatment, Singapore
Engineering and planning, procurement, production and delivery of the complete plant engineering as well as installation and commissioning. The contained metal elements are removed from the slag. The metal-free slag is used as building material for a new island. Customer: Remex Mineralstoff GmbH Retention: August 2014 Commissioning: June 2015 Throughput: 600.000 Mg/a Machines for metal ...
-
Detection of metal dust in a clear gas site after bag filter - Case Study
Client: Precious metal separation units (South Germany) Product: Metal dust What measuring process was used previously: No measurement was taken Client benefit: Due to governmental requirements, the company owner was forced to install permanent monitoring of the filter ...
By ENVEA
-
Cu(II) separation from diluted aqueous solutions by flotation with atypical collectors anti and syn 2–hydroxy–3,5–di–tert–butyl–benzaldoxime
The paper is a contribution to the development of the flotation separation area, concerning in the proposal of new atypical collectors (anti and sin 2–hydroxy–3,5–di–tert–butyl–benzaldoxime) for the metallic ions separation from diluted aqueous systems. A case study (R%) was studied and the optimal parameters were established. The insoluble species of Cu(II), isolated by flotation were ...
-
Non-ferrous metals separation from Demolition Waste
COGELME Eddy Current Separator for Demolition waste with concentric and eccentric magnetic rotors. For separation of non-ferrous metals from bulky and heavy demolition waste fraction Cogelme offers an extremely sturdy and powerful Eddy Current Separator. Solid wide diameter magnetic rotor, designed for heavy materials handling, separates aluminum, copper, brass, lead objects up to 400 mm ...
-
Poland - WEEE recycling - Case Study
Customer: AZOTAS Country: Poland Machinery: RECYCLING LINE FOR ELECTRIC AND ELECTRONIC WASTE A big Guidetti line delivered to Poland for WEEE recycling, electric and electronic waste, motherboards, small and big appliances, big whites, with production up to 1 ton/h. Indicated for WEEE recycling, it recovers metals with final separation between copper and aluminum. This line represents a ...
-
Maximising Non-Ferrous Metal Separation
There is an ever-growing demand to maximise the recovery or removal of metal from waste, especially non-ferrous. The economic viability of many recycling plants is based upon their ability to successfully recover valuable metals such as aluminium. In operations processing waste plastics, successful recycling is not possible without removing the ferrous and non-ferrous metal contamination. This ...
-
What' s the working process of PCB recycling machine?
The raw materials are different, the process of PCB recycling machine is different, but the general process includes dismantling, shredding, crushing, sieving and separating. Through these steps, metals will be separated from resin fiber. Process of PCB board recycling machine The process of PCB recycling machine adopts dry type crushing and separating method to separate mixed metals and resin ...
-
Testing an application of a biotic ligand model to predict acute toxicity of metal mixtures to rainbow trout
We tested the applicability of a previously developed biotic ligand model (BLM) to predict acute toxicity of single metals and metal mixtures (cadmium, lead, and zinc) to rainbow trout fry (Oncorhynchus mykiss) from a single available data set. The biotic ligand model used in the present study hypothesizes that metals inhibit an essential cation (calcium) and organisms die due to its ...
-
Electrostatically Recovering Copper Wire
A combination of an ElectroStatic Separator and a Metal Separation Module is enabling the recovery of fine copper and other metals from a waste product at a UK metal recycling ...
-
Case study - Utility Ltd – Ukraine
Customer Utility Ltd is the leading glass recycling company in Ukraine, with more than 70% of recycled glass production countrywide. The company is producing high quality glass cullet for its partners in Ukraine, Russia, Moldova and Belarus. Requirements The sorting task is to separate three main colors of cullet – flint, green and amber – and clean them up by means of rejecting ...
-
Austin AI QXR-M – Technology to improve metal recovery from non-ferrous residues
Existing technology has been used for some time to separate light non-ferrous alloys from heavier non-ferrous alloys; however, over the past three years, there is a significant added value in performing additional separations to recover specific high dollar alloys. Examples of such are separating pure copper from copper alloys (brass and bronze) or wrought from cast aluminum. The only way to do ...
-
6 Mobile Metal Separators Sold in 3 Months
Following a surge in orders for their mobile metal separator, Steelweld Enviro Products Ltd and CRJ Services have ordered six (6) Bunting Eddy Current Separators and Rare Earth Drum Magnets in the first quarter of 2021. The Eddy Current Separators separate non-ferrous metals from non-metallic material with the Rare Earth Drum Magnets recovering magnetic ...
-
Metal Recovery from WEEE and Cable
There is a wealth of valuable metals present in WEEE (Waste of Electrical and Electronic Equipment) and cables. However, the recovery is often difficult due to the small particle size range and variable nature of the metals. With the development and launch of the ElectroStatic Separator [in 2020], Bunting now provides a complete multi-stage metal separation solution incorporating several ...
-
Wood here, plastic there ... Redevelopment, renovation, urban reuse
Redevelopment, renovation, urban reuse; these are the types of interventions that are helping many construction companies in public and private sector whilst in almost total absence of new built. These are usually small activities which are ideally suited for construction companies specialized on restructuring and refurbishment sites; in many occasions the total removal of obsolete buildings ...
By MB Crusher
-
Thermal Treatment of MSW - Can we Afford Recycling at the End of the Pipe?
Incineration has clear environmental advantages over direct landfilling since it reduces the risk of pollution of water resources and prevents greenhouse gas emissions. If incinerators are equipped with metals recovery stages, they can be used as recycling processes for mineral materials and metals. Such separating incinerators may become competitive with separate collection schemes for metal ...
-
PCB recycling: How to recycle circuit boards?
As we know, PCBs, or printed circuit boards, are generally contented in waste computer, TV, mobile phone, etc. They are consisted of 40% metals(most of copper) and 60% non-metals, which has high recyclable. Well, how to recycle circuit boards? There are three primary ways to recycle circuit boards, including heating recycling method, chemical recycling method and physical recycling method. Each ...
-
C&A tool increases profitability, maintains clean facility with chip processing system
Challenge A machining supplier needs an automated chip and fluid processing system to process metal turning and chips, while simultaneously capturing expensive cutting fluids for reuse. Customer C&A Tool Engineering, Inc. Industry Machining Products Vertical Axis Crusher Diagonal-Shaft Wringer Steel Belt Conveyor Screw Conveyor Tramp Metal Separator Business Benefits Realized Recovery ...
By PRAB, Inc
-
Shredding tyres reduces transportation costs by 75%
Recycling tyres is one of the fastest-growing business opportunities around the world. The EU, along with other countries around the world and many states in the US have banned tyres from landfills. This means that more and more tyres are being recycled for raw material for new applications, such as ground rubber mulch for playgrounds or rubberised asphalt, or are burned as tyre-derived fuel ...
By Tana Oy
-
Circuit board recycling equipment
Circuit board recycling equipment is professionally to process the waste circuit boards to recycle the metals out for profit. The working principle of circuit board recycling equipment is mainly crushing and separation. The metals and non-metals can be separated from waste circuit boards. Circuit board recycling equipment process scrap circuit boards through shredding or crushing, eddy-vibrating ...
-
Sequential recovery of copper and nickel from wastewater without net energy input
A novel bioelectrochemical system (BES) was designed to recover copper and nickel from wastewater sequentially. The BES has two chambers separated by a bipolar membrane and two cathodes. Firstly, the copper ions were reduced on a graphite cathode with electricity output, and then with an additional bias-potential applied, the nickel ions were recovered sequentially on a copper sheet with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you