metal sludge recycling system Articles

  • East coast metal treatment facility recycles wastewater

    Evaporator/Crystallizer Solves Pollution Problems The Facility A major industrial Fortune 500 company manufactures armored-tracked vehicles for the U.S. Army. The plant is located in York County, Pennsylvania. The Problem Aluminum and steel assemblies and parts undergo chemical dip and spray treatments before painting. The ...

  • Wastewater Metals Removal

    Industrial Wastewater Treatment Success Stories Wastewater Treatment Metals Removal Ton Nerve Gas Agent Container Rinse Waters ...


    By Integrated Engineers Inc.

  • Pollutants in Urban Wastewater and Sewage Sludge

    Untitled Document Executive Summary Water policy in the European Union is aiming to promote sustainable water use and a major ...

  • Metals & Finishing Industrial Wastewater Treatment

    Industrial Wastewater Treatment Success Stories Metals and Finishing Industrial Wastewater Treatment Aircraft Components - 80% Cost Reduction ...


    By Integrated Engineers Inc.

  • Case study - Nottinghamshire Recycling

    DUO Equipment delivered and installed a new full washing and water management plant for Nottinghamshire Recycling Ltd (NRL). Based in Worksop, Nottinghamshire, NRL is a sustainable waste solution provider processing C & D waste, green waste, wood and recycled aggregates. The new washing and water management plant (which includes a Gennaretti centrifuge system) will provide NRL with the ...


    By DUO (Europe) plc

  • Oil and metal recovery from mill scale and grinding swarf for the metal industry - case study

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012. Our client is a medium-sized company operating in the field of waste recycling and ...


    By econ industries GmbH

  • Pilot test of pollution control and metal resource recovery for acid mine drainage

    The study was undertaken in order to recover the metal resources from acid mine drainage (AMD). A 300 m3/d continuous system was designed and fractional precipitation technology employed for the main metals Fe, Cu, Zn, and Mn recovery. The system was operated for six months using actual AMD in situ. The chemicals' input and also the retention time was optimized. Furthermore, the ...


    By IWA Publishing

  • Recovery of Precious Metal Catalysts - A New Process Using Supercritical Water Oxidation

    Up to now, the recovery of precious metals used as catalysts in chemical processes has involved the use of incineration. Now, however, a British-Swedish joint venture has developed a process which uses supercritical water oxidation instead, which provides many economic and environmental advantages. Precious metals are used extensively in catalysts in a wide range of industrial chemical processes. ...

  • Recycling paradise: Composting on maui hits its stride

    Lush, green and ever-inviting, the Hawaiian island of Maui is the vacation destination of choice for more than 2.2 million people each year. Maintaining that pristine, idyllic look comes with a price, however: a year-round growing season yields a massive stream of green waste from non-stop cutting, trimming and pruning. While the resultant green waste was, for years, simply landfilled along with ...


    By Morbark, LLC

  • Heavy Industry Plant Wastewater Treatment, Recovery ang Recycle Using Three Membrane Configurations in Combination with Aerobic Treatment

    ABSTRACTIn the late 1990’s a major diesel engine manufacturing plant began evaluation of wastewater treatment technologies that would improve the quality of wastewater discharge, would produce treated effluent of reduced oil and grease, BOD and COD load suitable as feed to their sanitary waste biological treatment plant, and eliminate the costs and risks associated ...

  • Waste Water Batch Treatment System

    Industrial Wastewater Treatment Batch Treatment Systems (BTS) are intended for lower daily volumes of wastewater typically less than 10,000 gallons per day and designed to “batch” treat wastewater from start to finish at one time. In a batch treatment system, a volume of wastewater is gathered, treated by chemical / physical / biological means, and discharged. Storage ...


    By Water Innovations, Inc

  • What is a wastewater treatment system and how does it work?

    For industrial companies producing wastewater as part of it’s process, some type of wastewater treatment system is usually necessary to ensure safety precautions and discharge regulations are met. The most appropriate wastewater treatment system will help the facility avoid harming the environment, human health, and a facility’s process or products (especially if the wastewater ...


    By SAMCO Technologies, Inc.

  • Introduction to Decentralized Packaged Wastewater Treatment (PWWT) Systems - PDH Article

    Learning Objectives After reading this article, you should understand: Functions and processes of a decentralized PWWT system; Design considerations of a PWWT system. Overview "Clean water will be the oil of the 21st Century." The accuracy and magnitude of this statement is resonating worldwide. ...

  • Waste Water Treatment For Printed Circuit Manufacturers

    This article only considers normal PWB processing and examines the following metals, Copper, Nickel, Zinc, Lead, Tin, Gold, and the problem anions. cyanide and EDTA complexes. If you've added something new, check it's treatability first. All of these systems can keep you in compliance, even at 0.1 ppm, some will just cost you more to operate or require a 'patch'. These days, everyone wants to ...


  • Treatment Of High Strength Chemical Industry Wastewater Using Moving Bed Biofilm Reactor (MBBR) and Powdered Activated Carbon (PAC) Technology

    A new Waste Recycling Facility (WRF) was created at the Sasol coal to liquids facility in Secunda, South Africa with a wastewater treatment system that includes equipment to treat the wastewater and storm water through several steps including equalization, oil removal (gravity separation and dissolved air flotation), lime neutralization/metals precipitation, back-neutralization, fixed-film ...

  • Integrated Engineers Case Study: Circuit Board Manufacturer

    A circuit board manufacturer in southern California was not able to achieve the discharge levels of copper and nickel with their existing system of coagulant, anionic and cationic flocculants and metal precipitant treatment process followed by lamella plate clarification. The previous treatment process developed a settled sludge that had poor shear characteristics and required further coagulant ...


    By Integrated Engineers Inc.

  • Impact of organic residues on soil microorganisms

    It is well known that organic residue amendments to soil give beneficial effects such as provision of plant nutrients, increased humus content and thereby increased water holding capacity, improved structure and increased cation exchange capacity. Organic wastes can be a valuable fertiliser in terms of phosphorous. Chemical precipitation in the sewage treatment plant makes sewage sludge rich in ...


    By ORBIT e.V.

  • Wastewater Reuse in Zinc Plating: Protectakote Pty Ltd

     Protectakote Pty Ltd has implemented a waste water recycling system at its Geelong facility which is saving it approximately $19,600 per annum and had a very attractive payback of 0.7 years, even without full qualification of all the benefits. Background Protectakote Pty Ltd (Protectakote) is a small metal plating and powder coating operation located in the Geelong region ...


  • A Struvite Control and Phosphorus Removal Process for Centrate: Full-Scale Testing

    ABSTRACTThe North End Water Pollution Control Centre (NEWPCC) in Manitoba, Canada serves a population of approximately 380,000. The dry weather flow to the NEWPCC is approximately 175 ML/d (46 MGD). The plant uses anaerobic digestion and centrifuge dewatering in its solids treatment train. The centrate stream comprises approximately 20 percent of the plant’s phosphorus load. The plant suffers ...

  • Leading military electrical connector manufacturer - case study

    Application The client designs and builds complex electrical connectors for salt water applications. The connectors are used in underwater communications cables and to make solid electrical connections within nuclear submarines. Each connector is housed in a durable waterproof rubber material with gold and platinum plated eluctors to optimize electrical conductivity and decrease ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you