metal test Articles

  • Jar Testing for Metals Removal

    Using the chart below, find the metal(s) of concern. Determine the best pH range for maximum insolubility for the metal(s). If there is a combination of metals, then concentrate on the metal with the highest concentration and adjust the pH to this point. Determining the Optimum pH for combined metals: Typically facilities have 2, 3 or more different metals in their waste stream. To determine the ...


    By Integrated Engineers Inc.

  • Case study - Procurement and installation of a Biogas desulphurization unit at the Chania WWTP

    A proposal based on Bioconservacion’s technology was selected as the winning bid in the public tender released in 2015, covering the design, procurement and construction of a biogas desulfurizing unit to be installed in the waste water treatment plant in Chania, Greece. With a population over 100,000, Chania is the second largest municipality in the Greek island of Crete. Its waste water ...


    By Bioconservacion SA

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • ANDalyze - Real Time Testing for Heavy Metals - Whitepaper

    Whitepaper on DNAzyme heavy metals testing technology. Water pollution is a worldwide problem affecting developing and developed countries alike. Heavy metal contaminants are one prevalent type of water pollutant. They are persistent in the environment once discharged and removal from source waters is necessary to ensure a clean drinking water supply. The problem of heavy metal pollution arises ...


    By ANDalyze

  • Heavy Metals Water Testing Powered by DNA

    Water pollution is a worldwide problem affecting developing and developed countries alike. Heavy metal contaminants are one prevalent type of water pollutant. They are persistent in the environment once d is charged and removal from source waters is necessary to ensure a clean drinking water supply. The problem of heavy metal pollution arises from several sources. Heavy metals such as uranium can ...


    By ANDalyze

  • Mining application - Heavy metals testing in water

    Isaac Plains is an open cut coal mine, in Northern Queensland, Australia. The Isaac Plains Project operates under an Environmental Authority (EA). They needed a field test for heavy metals compliance. The water sources included  potable water, mine affected water, natural creek flows, water releases, groundwater and the receiving environment. The site water management system is comprised of ...


    By ANDalyze

  • Pilot testing of a membrane bioreactor for metals removal

    The City of Davis, California (City) Water Pollution Control Plant (WPCP) is facing stricter effluent permit requirements and compliance with the California Toxics Rule (CTR) effluent limitations. The impact of these requirements will necessitate upgrades to the existing WPCP to include conventional secondary and tertiary processes to control the discharge of biochemical oxygen demand (BOD), ...

  • Metal Polishing

    Integrated Engineers, Inc. conducted a treatability test for a facility that polishes stainless steel. We were asked to assist them in meeting their local discharge requirements as the flocculant they had been using was not working sufficiently. The initial pH of the wastewater upon arrival was 7.0. 3.0 grams of Floccin-G was used per 1000 ml jar of wastewater. After mixing for 10 minutes, the ...


    By Integrated Engineers Inc.

  • Evaluation of Metals, Metalloids, and Ash Mixture Toxicity Using Sediment Toxicity Testing

    In December 2008, a release of 4.1 million m3 of coal ash from the Tennessee Valley Authority Kingston Fossil plant occurred. Ash washed into the Emory River and migrated downstream into the Clinch and Tennessee Rivers. A Baseline Ecological Risk Assessment evaluated risks to ecological receptors from ash in the river system post‐dredging. This paper describes the approach used and results ...


    By John Wiley & Sons, Ltd.

  • Testing the barrier performance of metallized polymer films for permeation of oxygen and water vapour

    General Vacuum in Lancashire, now part of the Bobst Group have been designing and building large industrial vacuum roll coaters for use in optical, electrical and general packaging applications since 1996. Aluminium metallized polymer films can be used in packaging applications where there are a number of requirements including barrier protection (WVTR, OTR etc.).  This type of packaging has ...


    By Systech Instruments Ltd

  • A new Use for DNA - Testing for Heavy Metals with DNAzyme Technology

    A completely new technology is now available that offers a new way to test water for contaminants andgreatly reduces the time, effort, costand complexity of testing water samples for contaminants such as lead ind rinking water. DNA sensor technology combined with a handheld fluorimeter platform tests water samples within two minutes, giving results at the push of abutton. Protecting public health ...


    By ANDalyze

  • Pilot test of pollution control and metal resource recovery for acid mine drainage

    The study was undertaken in order to recover the metal resources from acid mine drainage (AMD). A 300 m3/d continuous system was designed and fractional precipitation technology employed for the main metals Fe, Cu, Zn, and Mn recovery. The system was operated for six months using actual AMD in situ. The chemicals' input and also the retention time was optimized. Furthermore, the ...


    By IWA Publishing

  • Mining Metals Solution Treatability

    Integrated Engineers, Inc. conducted a treatability test on water containing metals in solution from a mining company’s analysis labs. Initial pH was below 2, so it was adjusted to 6.5 to 7.5 using caustic. This lowers the solubility of the metals, and helps the Floccin to work better. The Floccin-1105 worked well at a dosage of 2.1 grams/ 1,000 ml of wastewater (treatment dosage of .9 lbs. of ...


    By Integrated Engineers Inc.

  • Sintered Metal Manufacturing 2

    This facility generates 2 waste streams from their metal sintering operations. This second waste stream comes from their post conditioning of the parts with the use of detergents for cleaning and a polishing compound for surface finish/deburring. The wastewater stored in several tanks and is hauled off site for disposal at $0.62/gallon. The treatability with Floccin H is shown in the jar test ...


    By Integrated Engineers Inc.

  • Sintered Metal Manufacturing 1

    This facility generates 2 waste streams from their metal sintering operations. The first waste stream comes from their cutting oil operations and rinse water. The wastewater is then stored in several tanks and allowed to partially separate with some of the floating oil skimmed off. The residual wastewater (3,000 gallons/week) is then hauled off site for disposal at $1.15/gallon. The treatability ...


    By Integrated Engineers Inc.

  • Heavy Metals Analysis

    Correct measurement results are a prerequisite for compliance with limit values, which are always specified as total metals. Heavy metals such as copper, nickel, zinc, etc. can be quickly and reliably determined in aqueous samples with the help of the LANGE cuvette tests. Matrix factors (e.g. interference ions, colour, turbidities, etc.) may have a negative impact on themeasurement and cause ...


  • Scrap Metal Recycling 1

    Integrated Engineers provided treatability services for the facility for three areas onsite: the oil water separator, tin baler effluent water, and aluminum shavings/cutting oil runoff. The facility processes and bales scrap metal for recycling. The three different waters were treated with Floccin J. Oil Separator The oil separator water is used to remove any free oil that is floating on top of ...


    By Integrated Engineers Inc.

  • Wastewater Metals Removal

    Industrial Wastewater Treatment Success Stories Wastewater Treatment Metals Removal Ton Nerve Gas Agent Container Rinse Waters ...


    By Integrated Engineers Inc.

  • Optimizing Metals Removal

    Optimizing Wastewater Metals Removal Making Wastewater Metals Insoluble for Easy Removal To remove metals from wastewater, the metals need to be insoluble (not in solution). Many facilities, such as in the ...


    By Integrated Engineers Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you