microfiltration membrane Articles

  • Focus on Microfiltration Part 2: Filter Longevity and Filter Selection

    Last month, we described the considerations associated with predicting filter service life and how total throughput can be estimated through experimentation.  In this second installment, we will examine four filter selection strategies for maximizing service life in continuous-use applications. These aspects consider chemical compatibility, temperature, binding characteristics, and pore ...


    By Sterlitech Corporation

  • Simulation of particle capture in a microfiltration membrane

    The present study takes an interest in the description of the fouling mechanisms by a numerical approach at the microscopic scale. At first, an X-ray tomography has enabled the modelling of the membrane structure for the numerical simulations. Next, for different particle size, a same volume of particles has been sent in the modelled membrane and the final permeability has been computed. Thus, ...


    By IWA Publishing

  • A history of chemically resistant membranes

    The use of polymeric membranes for filtration of non-aqueous solutions started around 1960 and has been developed significantly since then [1]. Today, non-aqueous membrane filtration applications in chemical and pharmaceutical processing account for more than 25% of the global total polymeric membrane market [2]. ...


    By Sterlitech Corporation

  • What Are the Best Companies for Microfiltration and Ultrafiltration Membrane Systems?

    Whether you are looking for a microfiltration or ultrafiltration (MF/UF) membrane system that will help your facility manufacture safe food and/or beverages, boiler feed water for industrial process, or treat contaminated waste to acceptable effluent standards, it can be overwhelming to search for the MF/UF membrane system that is ideal for your specific application. MF/UF membrane systems solve ...


    By SAMCO Technologies, Inc.

  • Basic Principles of Microfiltration

    Microfiltration can be defined as the separation of particles of one size from particles of another size in the range of approximately 0.01 µm through 20 µm. The fluid may be either a liquid or a gas. Microfiltration media are available in a wide variety of materials and methods of manufacture. They can be rated either 'absolute' or 'nominal' depending upon the percentage of capture of particles ...

  • Microfiltration Pilot System, California

    INTRODUCTION In May 2013, Pure Aqua, Inc. successfully manufactured and supplied an microfiltration pilot system to a membrane manufacturer for Title 22 certification. Title 22 is the State of California’s stringent standard for treatment/disinfection of wastewater for non-potable reuse and ...


    By Pure Aqua, Inc.

  • How Do You Choose the Best Reverse Osmosis and Nanofiltration Membrane System for an Industrial Facility?

    As global demands for clean water increase, more and more industrial facilities are looking toward membrane filtration solutions, such as reverse osmosis (RO) and nanofiltration (NF), to help manage intake, process, and waste water treatment. Using membrane filtration can help your facility reuse wastewater and virtually eliminate discharge fees, and depending on the industry or required use, it ...


    By SAMCO Technologies, Inc.

  • Reverse Osmosis and Nanofiltration Membrane Filtration Systems: Common Problems and How to Fix Them

    Reverse osmosis (RO) and nanofiltration (NF) are membrane filtration technologies that are designed to remove solute ions and molecules from a pretreated liquid stream. Well-designed RO/NF units are compact and demand relatively little maintenance, making them an attractive alternative to conventional treatment trains. Even despite the merits of today’s efficient RO/NF technologies, it pays ...


    By SAMCO Technologies, Inc.

  • Membrane foulants and fouling mechanisms in microfiltration and ultrafiltration of an activated sludge effluent

    Membrane fouling in microfiltration (MF) and ultrafiltration (UF) of an activated sludge (AS) effluent was investigated. It was found that the major membrane foulants were polysaccharides, proteins, polysaccharide-like and protein-like materials and humic substances. MF fouling by the raw effluent was governed by pore adsorption of particles smaller than the pores during the first 30 minutes of ...


    By IWA Publishing

  • Effect of floc structure and strength on membrane permeability in the hybrid coagulation-microfiltration process

    The relative importance of floc property on microfiltration and fouling mechanism remains a field of arguments. The effects of floc structure and strength on fouling rate of coagulation-microfiltration were investigated in dead-end microfiltration. Flocs varying in size, fractal structure and strength were prepared by AlCl3 and PACl (Polyaluminum Chloride) coagulation at various dosages followed ...


    By IWA Publishing

  • Membrane foulants and fouling mechanisms in microfiltration and ultrafiltration of an activated sludge effluent

    Membrane fouling in microfiltration (MF) and ultrafiltration (UF) of an activated sludge (AS) effluent was investigated. It was found that the major membrane foulants were polysaccharides, proteins, polysaccharide-like and protein-like materials and humic substances. MF fouling by the raw effluent was governed by pore adsorption of particles smaller than the pores during the first 30 minutes of ...


    By IWA Publishing

  • Influence of buoyant media on particle layer dynamics in microfiltration membranes

    This study forms a part of the physical study of the membrane bioreactor in presence of buoyancy media. Kaolin clay suspension with buoyancy media (anthracite) was used as a suspension and the particle layer development on membrane surface with evolution of time was studied. Presence of buoyancy media reduced the pressure development by almost two folds compared to in absence of the media. The ...


    By IWA Publishing

  • How Much Do Microfiltration and Ultrafiltration Membrane Systems Cost?

    Microfiltration and ultrafiltration (MF/UF) membrane systems are used in a variety of processes and applications. They can help facilities treat boiler feed water, separate out contaminated waste to acceptable effluent standards, and manufacture safe food and/or beverages, to name a few. If your facility might require MF/UF membrane system technology, you are likely ...


    By SAMCO Technologies, Inc.

  • Do You Need a Microfiltration or Ultrafiltration Membrane System for Your Plant?

    Determining whether or not an industrial plant needs a microfiltration (MF) and/or ultrafiltration (UF) membrane system isn’t always as straightforward as it seems. While these systems are not essential for every industrial process, when thoughtfully implemented within an intake, process, or waste stream, they can go a long way in improving a facility’s efficiency and/or cutting ...


    By SAMCO Technologies, Inc.

  • Microfiltration and Ultrafiltration Membrane Systems: Common Problems and How to Fix Them

    Microfiltration (MF) and Ultrafiltration (UF) are membrane-based filtering technologies that use thin layers of semipermeable material to separate out contaminating particles, such as organic material, bacteria, suspended solids, and other pollutants. In industries such and dairy, pharmaceutical, and chemical, the separated material may be a product they are recovering, and more facilities ...


    By SAMCO Technologies, Inc.

  • Fouling of a microfiltration membrane by humic-like substances: a mathematical approach to modelling permeate flux and membrane retention

    Membrane retention of the humic-like substances present in a soluble microbial products (SMP) suspension was studied by using a dead-end filtration system. The SMP suspension was extracted from the sludge of an enhanced biological phosphorus removal-membrane bioreactor. Our results showed that both adsorption and steric retention of the humic-like substances governed their transport through ...


    By IWA Publishing

  • Microfiltration vs Ultrafiltration Processes: What is the Difference?

    Microfiltration (MF) and ultrafiltration (UF) are both processes by which a contaminated liquid is passed through a semipermeable membrane that removes solids too large to fit through the membrane’s pore size, yielding a purified liquid stream. To what degree the stream is purified depends on the contaminants present and the pore size of the membrane. MF and UF are generally ...


    By SAMCO Technologies, Inc.

  • Reducing the effect of cyanobacteria in the microfiltration of secondary effluent

    Cyanobacterial blooms in the lagoons of sewage treatment plants can severely impact the performance of membrane plants treating the effluent. This paper investigates the impact of Microcystis aeruginosa in a secondary effluent on the microfiltration filterability and cleaning of the membrane. Alum coagulation and dissolved air flotation (DAF) were investigated to remove the algae and so enhance ...


    By IWA Publishing

  • A hybrid flotation: microfiltration cell for effluent treatment

    The investigated hybrid cell combines the advantages of both flotation and membrane filtration, while overcoming their limitations and having as outcome clean water from wastewater. The specific objective of the current paper was to apply the process for the efficient separation of effluents containing toxic metals (zinc cations and chromate anions). The main examined parameters were the sorbent ...


    By Inderscience Publishers

  • Focus On Microfiltration Part 1: Filter Longevity

    For consumers using disk, syringe, and capsule filters it is a common FAQ: How long will my filter last? Or, to put it another way: How much fluid can I expect to pass through my filter before it clogs? This seems to be a simple and reasonable question for a filter consumer: Would any of us purchase a product without an understanding ...


    By Sterlitech Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you