mist electrostatic precipitator Articles

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • Wet Electrostatic Precipitation Demonstrating Promise for Fine Particulate Control

    Editor’s Note: Part l of this two-part feature on wet electrostatic precipitation (wet ESPs) outlines the need for multi-pollutant air pollution control technologies, the basics of wet and dry electrostatic precipitation, the ability of wet and dry ESPs to treat fine particulate, and the use of wet ESP technology at Northern States Power Company’s Sherco Station. Part II will explore the key ...


  • Case study - Wet electrostatic precipitators offer cost-effective solution for HZL

    An array of complex air pollution issues places the metallurgical industry among the largest potential sources of pollutants, and one of the most tightly regulated industrial sectors. One fully integrated, nonferrous metal producer in India, however, is demonstrating that a company with a determined commitment to environmental protection, energy efficiency and sustainability can succeed in ...


    By Beltran Technologies, Inc.

  • Innovative wet electrostatic precipitators assure competitive edge in acid marketplace

    The unsteady global economic recovery continues to subject many core industries to persistent volatility in profits, prices, markets and capital investments. However, some analysts remain optimistic about the global international trade in sulfur in all forms, particularly sulfuric acid. This versatile mineral acid is both the world’s most widely used chemical, and the one with the highest ...


    By Beltran Technologies, Inc.

  • Controlling acid gas mists

    Gas cleaning New and strict pollution regulations in metallurgical plants worldwide are restricting particulate and acid gas emissions to extremely low levels. Because of that, sulphuric acid plants are being installed to remove and utilise S02 in gases resulting from the roasting of sulphide ores, smelting of ores, and burning or regeneration of spent acid or acid sludge from ...


    By Beltran Technologies, Inc.

  • OM-1 Oil Mist Eliminators Collect Coolant Mists, Lubricant Mists, Smoke

    A major midwest metalworking facility uses 24 OM-1 Mist Eliminators to collect oil mists from over 200 sources, including grinding, dressing, CNC machining, lathes and heat treating operations.  OM-1's ability to accommodate smoke gives it an advantage over centrifugal-type oil mist collectors, which are not usable for smoke. Both soluble and non-soluble oils are used;  OM-1 collects ...


    By Tri-Mer Corporation

  • How do oil mist collectors work? Comparing the different technologies, part II

    In our previous article about oil mist collector technology, we discussed the pros and cons of centrifugal mist collectors and filter-based mist collectors. Today, we look at the other two most common methods of getting oil mist out of the air. Electrostatic Precipitator Mist Collectors An electrostatic precipitator uses ...


    By ProVent, LLC

  • Case study - Rockwood Pigments chooses Beltran System

    Rockwood Pigments, a global manufacturer of pigment products, has chosen a wet electrostatic precipitator (WESP) system engineered by Beltran Technologies, Inc.. to clean process gas streams before entering a sulfuric acid plant at its Easton, Pa., manufacturing facilities. Rockwood is the world's second laraest manufacturer of iron oxide and other inorganic color pigments used by paint and ...


    By Beltran Technologies, Inc.

  • Case study - AngloGold Ashanti chooses Beltran WESP

    AngloGold Ashanti Brasil Mineracao is a leading producer of gold in the world. AngloGold was working on production plans for the Cuiaba Gold Mining Expansion Project located at Nova Lima, Minas Gerasis. The plant's production capacity is projected to be equivalent to 400 metric tons of sulfuric acid per day. The Promon Company worked on the design, procurement, construction and assembly services ...


    By Beltran Technologies, Inc.

  • Case study - WESPs: Securing a cleaner future for power-generating facilities

    This article explains why wet electrostatic precipitators remain a viable technology for dealing with today's increasingly stringent compliance issues. Despite recent, recession-related volatility in both power generation and consumption, industry analysts expect a resumption of long-term growth trends as continued global demand for energy — in both developed and developing nations ...


    By Beltran Technologies, Inc.

  • Case study - Beltran WESPs deliver superior gas cleaning performance for Zambia’s fast-growing copper industry

    The central importance of copper production to the Zambian economy is reflected in the fact that the value of copper exports in 2010, about $5.8 billion, accounted for 78 percent of the country’s total merchandise export earnings, and helped make it the seventh largest producer in the world. Capitalizing on a worldwide surge in copper prices and the coincident privatization of ...


    By Beltran Technologies, Inc.

  • Case study - WESP technology provides durable solution for Brazil’s top zinc operation

    Forward-thinking metallurgical plant operators around the world constantly seek out more advanced exhaust gas recovery technologies, not only to meet increasingly strict environmental regulations, but also to achieve superior operating performance and to control maintenance and other costs in a competitive marketplace. One fully-integrated polymetal producer headquartered in Brazil has managed to ...


    By Beltran Technologies, Inc.

  • Advanced WESP designs assure superior gas cleaning performance

    Nowadays, many industries are facing formidable environmental challenges and there is a growing need for effective, economical gas cleaning and air pollution control equipment. Michael Beltran of Beltran Technologies, Inc. reports on a renewed interest in high-efficiency wet electrostatic precipitators (WESPs) and discusses their importance for controlling sulphuric acid mists and other ...


    By Beltran Technologies, Inc.

  • Pollution Systems VS-3 wet srubber removes grease and particulate

    A leader in the Food Industry has several Pork Sausage Cookers at their manufacturing site in Alabama.  Each cooker exhausts over 4,000 ACFM.  The streams are saturated with moisture and the pollutant load is pork grease.  Electrostatic Precipitators (ESP’s) have been installed to treat the exhaust.  However, the ESP's were not working well and have high maintenance and ...


    By Pollution Systems

  • WESPS continue to deliver

    Compliance with the increasingly stringent air pollution regulations of recent years is not the only reason forwardthinking industry leaders are adopting more sophisticated gas cleaning and air pollution control strategies. The desire to achieve higher performance efficiencies, control costs in a competitive marketplace, and stay ahead of the regulatory compliance curve is another driver of ...


    By Beltran Technologies, Inc.

  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • The Beltran biomass cogeneration system

    An effective, economical solution for harvesting safe, renewable domestic energy, mitigating wastes and achieving environmental goals. Background The Beltran Biomass Cogeneration System (BBCS) is an integrated, three-stage process that uses proprietary gasification technology to convert biomass and other organic wastes into versatile, cleanburning synthesis gas. The purified ...


    By Beltran Technologies, Inc.

  • Dry/Wet Scrubbers for Clean Air Compliance

    Air-scrubbing venturis and towers may be the answer to clean air compliance for small- to medium-sized companies. Forthcoming requirements of the Clean Air Act Amendments of 1990 will inventory many more specific chemicals considered hazardous. From acetaldehyde to xylenes, the list regulated under the air taxies program includes 189 hazardous air pollutants (HAPs). That number may ...


    By CR Clean Air Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you