mixer heat exchanger Articles

  • Improving Heat Transfer in Heat Exchangers

    Untitled Document Static mixer elements can reduce film buildup on the inside walls of your heat exchanger and improve heat transfer, allowing you to reduce heat exchanger size and space ...


    By Nordson EFD

  • Kenics Heat Exchanger Increased Production Capacity in Specialty Chemical Plant

    Increasing production capacity and setting a monthly production record are targeted goals for all manufacturers. To achieve this, all equipment and systems must work in perfect unison and perform to optimal efficiency. The Situation A large specialty chemical manufacturer located in Ohio was experiencing unsatisfactory production levels due to the plant’s old, outdated, ...


    By National Oilwell Varco

  • The design of static mixer heat transfer equipment for adhesives, sealants, resins and polymers.

    The fluids handled within the adhesives and sealant industries are amongst the most difficult to handle of any in the main process industries globally. The characteristics which make them particularly difficult to handle include: High viscosities (typically 1-2000 Pa.s, or 1000 to 2 million cP). Often non-Newtonian (viscosity is not constant and varies with shear rate). Some ...


    By National Oilwell Varco

  • With high-pressure in the mixer AERZEN‘s energy-efficient blower technology

    According to the Federal Statistical Office, annual sales of bakery goods total around EUR 18 billion. Behind this is an annual consumption of 85 kilogrammes per inhabitant, within which the general public prefers bread, which accounts for 63 percent of the total. With this type of food being so popular, the market is extremely competitive. The significance of larger medium-sized bakeries and ...

  • VacuDry Indirect heated vacuum thermal Desorption by econ industries - case study

    With the VacuDry8 technology the energy-efficient treatment of hazardous and industrial waste as well as contaminated soil, oil sludge and secondary raw material is realized. Controlled vacuum and heat are used to separate minerals from oil, solvents, mercury and other hazardous substances.    At the core of the econ VacuDry8 process is a specially designed dryer chamber which ...


    By econ industries GmbH

  • NOV Offers a White Paper on Kenics™ Heat Transfer Equipment for Adhesives and Sealants Applications

    NOV is offering a white paper that discusses the use of Kenics static mixer heat transfer equipment for adhesives, sealants, resins and polymers. The white paper describes the design aspects of heat transfer equipment and how it benefits end users in adhesives and sealant applications. The white paper goes into great detail on the: Heating and cooling processes used in the industry ...


    By National Oilwell Varco

  • Two-phase anaerobic digestion for class a biosolids at moccasin bend WWTP

    The Moccasin Bend Wastewater Treatment Plant (WWTP) provides treatment for the City of Chattanooga, Tennessee and the surrounding region. The City has completed upgrades to the solids handling facilities to treat and dewater the primary solids and waste activated sludge (WAS) from the WWTP. This paper summarizes the process to handle the primary solids and the start-up process. Primary solids ...

  • The Right Mix for Clean Air

    Reducing air pollution is an increasingly important topic all around the world. Many governments—also in developing countries—set new limits for emissions such as nitrogen oxides in flue gas. Sulzer offers advanced mixing technology for flue gas cleaning. The installation in a large power plant shows that these high-performance mixers can cope with the most difficult requirements. ...


    By Sulzer

  • 1st Tech applications range case study

    Paper industry: roller, air compressor, after cooler, calender bowl, chemical scrubber, closed cooling system, condenser, cooling tower, gas cooler, heat exchanger, intercooler, filtrate tank, filtrate pipe, vacuum filter, vacuum pump, slush pump, lime pump, evaporimeter, digester, scrubber, flow box, squeezer, indirect cooler, absorption plant, gas steam room, steam ...


    By Mibo International Corp.

  • City of Hamilton, Ontario Wastewater Treatment Plant Chooses Moyno’s New Urethane Stators to Increase Pump Life

    Springfield, Ohio The City of Hamilton, Ontario Wastewater Treatment Plants (WWTP) collect both sanitary and combined sewage (wastewater). The collection system services not only the City of Hamilton, but also the surrounding areas including the towns of Dundas, Ancaster, Water Down, Glanbrook Township, and the former City of Stoney Creek. The City of Hamilton’s Woodward Avenue WWTP began ...


    By Moyno, Inc.

  • Case study - Paint mixing

    Overview A company involved in the automotive aftermarket had a paint batch mixing and filling operation that used primers and fillers. They were faced with installing air pollution control equipment to handle the volatile organic compounds (VOCs) emitted by the solvents used in their processes. An independent consultant had determined that total exhaust volume from the facility was ...

  • Biosolids Composter Satisfies Customers and Neighbors

    A ticket to Penn State football games isn’t the only hard thing to come by in State College, Pennsylvania. So is the biosolids compost produced by State College’s University Area Joint Authority (UAJA) wastewater treatment plant. “For the last four years, we’ve been sold out before we’ve made the compost,” says Stephen Welch, who manages the UAJA composting plant. All biosolids generated — about ...


    By BioCycle Magazine

  • Renewable energy marketplace

    ALLU Group markets two types of equipment for use in biomass energy operations. The ALLU Screener Crusher bucket attaches to a front-end loader. The bucket is designed to aerate, crush, screen and mix at one time. The Screener Crusher has a rigid steel frame, onto which horizontally rotating screening and crushing drums are mounted. All the drums rotate in the same direction. There are several ...


    By BioCycle Magazine

  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you