mobile decanter Articles

  • Veolia EAU - Continuous monitoring of odor and target gas emissions at a WWTP, with the RQ Box solution case study

    The site Wastewater treatment plant Aquapôle, located in Isère, France Operated by Société Dauphinoise d’Assainissement (SDA) Capacity of 500 000 population equivalent ISO 14001 approach Challenges To define a zero point for the odor footprint of the site in order to ...


    By Alpha MOS Environment

  • Dewatering of Industrial Sludge - Case Study

    At Ten Cate Protect, town of Nijverdal, The Netherlands, 2006 During the wastewater treatment process at Ten Cate Protect large quantities of sewage sludge are liberated. A couple of days per week this sludge is transported in tanker trucks to a waste disposal plant. On June 14th 2005 a Geotube MDS unit was put in operation at Ten Cate Protect to separate and condense the sludge of the aerobic ...

  • Processing Hazardous Waste

    AVA is one of the leading suppliers of machines and system solutions having its core competencies in mixing and drying of any kind and in any industry. One of AVA’s vital businesses lies in developing and supplying turn-key (mobile) plants for processing contaminated recyclables and wastes using high vacuum and/or high temperatures. Comprising the core elements ...


  • Detection of chlorpyrifos in air using low volume polyurethane foam (PUF) sampling with immunoassay

    MATRIX: Air samples ANALYTE: Chlorpyrifos RANGE OF DETECTION: 0.088 to 1.200 mg/m3 MATERIALS: Chlorpyrifos RaPID AssayÒ Kit and Sample Diluent. Reagents: methanol (pesticide grade). Equipment: 40 mL glass vials with Teflon lined caps, 13 x 100 mm glass test tubes, 5 mL and 20 mL serological pipets, micropipet ...


  • Geotube Dewatering Technology Solves Lagoon Cleanout for Mexico’s Largest Chicken Processing Plant - Case Study

    Mexico's largest chicken processing plant was experiencing high levels of BOD discharge into the local river because their two sludge lagoons were full of high percentage solids sludge. The plant was expanding operations and had no place to store the additional sludge that would be generated, nor did it have any onsite means of removal and dewatering. The problem was compounded because the excess ...

  • Usen

    “Oil is not only an important sector of our industry but also a symbol of the independence of our country, of the hope for a better future”. These were the words of President Nursultan Nasarbayev in September 1999, commemorating the 100th anniversary of the formation of the oil and gas industry. The oil industry in Kazakhstan has existed for more than 100 years, however a significant boom in this ...


    By Flottweg SE

  • Municipal Wastewater Treatment - Prichard, Alabama - Case Study

    TenCate  develops and produces materials that function to increase performance, reduce costs, and deliver measurable results by working with our customers to provide advanced solutions. THE CHALLENGE Prichard AL is a town of about 30.000 people north of Mobile. AL Paul David, the Sewer Board Superintendent, oversees the contract management of two (21 ...

  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

  • Utilizing unconventional water sources for industrial reuse

    Reclamation and reuse of unconventional wastewater sources for plant raw water, cooling water and process pre-treatment has increased substantially due to increases in the cost of drinking water, recurring water shortages that can impact business operations, and tightening government regulation. Water is required in almost every industrial sector for the processing and manufacture of products. ...


    By WesTech Engineering, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you