mobile dust control Articles

  • Controlling Dust and Bioaerosols at a Biosolids Composting Faclity

    Studies at enclosed Longmont, Colorado project evaluate exposure level of employees. Operational changes reduce dust, endotoxin and A. Fumigatus by 90 percent. WHEN dealing with public health issues and composting, attention has been predominantly focused on potential exposure from the release of Aspergillus fumigatus (A. fumigatus) from composting facilities. Numerous studies were conducted to ...


  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

  • Case study - Mobile remediation system

    OVERVIEW A large consulting and contracting firm owns and operates several ex-situ Thermal Desorption Units (TDUs). Each single-load Thermal Desorption Unit has the capacity of desorbing 15 tons of soil per hour at a temperature of 400°F - 900°F. These Thermal Desorber Units have been designed to operate on both chlorinated and non-chlorinated RCRA, CERCLA, and private industry ...

  • A wood-strand material for wind erosion control: Effects on total sediment loss, PM10 vertical flux, and PM10 loss

    Fugitive dust from eroding land poses risks to environmental quality and human health, and thus, is regulated nationally based on ambient air quality standards for particulate matter with mean aerodynamic diameter  10 µm (PM10) established in the Clean Air Act. Agricultural straw has been widely used for rainfall-induced erosion control; however, its performance for wind erosion mitigation ...

  • A quantitative approach to the traffic air quality problem: the traffic air quality index

    The Traffic Air Quality (TAQ) model is a simple tool to estimate traffic fine particulate emissions on roadways (g/km) and can be used for both real-time analysis and for localized conformity analysis (“hot-spot” analysis for nonattainment areas) as defined by 40 CFR 93.123. This paper is a follow-up to a study published earlier regarding the development of the TAQ model. This paper shows how ...

  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

  • Workplace Monitoring: Who, What, When, Why, How?

    In my previous articles in this series for SHP readers, I have focussed on the need for current attitudes to general health and safety processes to change and emphasised the importance of regular monitoring. The best way to combat those ‘hidden killers’ and protect our workforces is to increase awareness of the benefits of regular monitoring and detection.  Employees then need to ...


    By Casella

  • Concrete Grinding Tools

    Concrete Grinding Tools,Concrete Crushing Machine,Crushed Concrete Concrete grinding tools are fast and reliable solution for smoothing out bumps and other irregularities in both horizontal and vertical concrete surfaces. Our concrete grinding machines use rotating discs to perform a variety of projects, from light task to open ...


  • VacuDry Indirect heated vacuum thermal Desorption by econ industries - case study

    With the VacuDry8 technology the energy-efficient treatment of hazardous and industrial waste as well as contaminated soil, oil sludge and secondary raw material is realized. Controlled vacuum and heat are used to separate minerals from oil, solvents, mercury and other hazardous substances.    At the core of the econ VacuDry8 process is a specially designed dryer chamber which ...


    By econ industries GmbH

  • New developments of vibratory feeders for large bulk material reclaim systems

    Summary The efficient economical storage, movement, control and blending of large tonnages at coal handling installations such as mines, power plants and port facilities require new and improved designs of vibratory equipment. Environmental and investment impact as well as operational advantages must be considered in the development of any new reclaim system. ...


    By General Kinematics

  • ALGIZ 10X Rugged tablet boosts productivity for the North American coal corporation - Case Study

    Challenge Find a rugged computer capable of handling a large-scale coal mining operation’s very specific needs. Solution Install the Algiz 10X rugged tablet and vehicle cradle in mining machinery cabins. Result A mining tablet solution that provides immediate boosts to productivity, plus countless hours and dollars ...


    By Handheld UK and Ireland Ltd

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • Pocket Gauger

    Hydro-Logic recently received major orders for the Pocket Gauger Windows Mobile software package from the two environmental regulators covering England and Wales (EA) and Scotland (SEPA). These orders have effectively confirmed Pocket Gauger's status as the UK's de-facto industry-standard system for collecting current-meter gaugings using conventional impellor-style meters. Pocket Gauger acts as ...

  • How PPE Makes Mining Industry Safe and Secure

    Work-related health and safety has always remained a cause for concern among industry experts, managers and workers. Many industries like energy, construction, fishing and farming report high incidence of casualties. The potential hazards that miners face daily in their workplace are plenty. Many of these hazards have progressive consequences that are not realized until too late. The effects ...


    By KWRS

  • Weather claims and wind safety

    Anybody working in the construction industry either here in the UK or anywhere else in the world is likely to know that the weather can present us with particular hazards. While rain, ice and snow are particularly dangerous to work in, we must always be aware that the wind is also likely to make conditions unsafe, particularly for those who work at height and those who ...

  • Vibrating feeders for stockpiling and reclaim

    The expanding applications of vibratory feeders for controlling the flow of bulk materials, and their adaptation for processing requirements, have developed considerable interest in stockpiling and reclaim systems. The general design of these units consists of a material transporting trough, or platform, driven by a vibratory force system. The flexibility and variety of designs is limited only by ...


    By General Kinematics

  • National Air Pollutant Emission Trends, 1900-1998

     Executive Summary What information is presented in this report? This report presents the United States (U.S.) Environmental Protection Agency’s (EPA) latest estimates of national emissions for criteria air pollutants: carbon monoxide (CO), nitrogen oxides (NOX ), volatile organic compounds (VOC), sulfur dioxide (SO2 ), particulate matter (PM) less than 10 ...

  • Properties and Behavior of Inorganics in Contaminated Soil

    Often, specific technologies may be ruled out, or the list of potential technologies may be immediately narrowed, on the basis of the presence or absence of one or more of the chemical groups. The relative amounts of each may tend to favor certain technologies. Metals may be found in the elemental form, but more often they are found as salts mixed in the soil. At the present time, treatment ...

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • Spending small to save big in a downturn

    How strategic upgrades in bulk handling components can pay off in the short term "You can"t save your way to solvency" goes the business adage, but suggesting major capital improvements with long-term pay-out in tight economic times may send your co-workers running for cover. Prosperity can often be found between both extremes, where strategically placed equipment upgrades can instantly reduce or ...


    By Flexicon Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you