mold analysis Articles

  • LDPE Molding

    These are 3 ideas that may lead to the root cause. 3% is not an acceptable scrap rate as some parts may have only a 5% profit margin. I wish you well. I believe the dye is added and I am finding out exactly how. No regrind is permitted. The carrier material and colorant is specifically intended for LDPE, but I am confirming this. LDPE was chosen for its flexibility because it ...


    By Aco Mold Manufacturing

  • Recycle Pallet Molding technology

    *Recycle Pallets Molds Design Analysis.When we received the customer Pallets design, we will gather all the related technical people to analysis the mold design first like demolding draft angle, strength, melt filling, deformation, thickness…and make mold flow analysis. After the design initially confirmed, we will have a technical meeting again to discuss all the plastic pallets molds ...


    By Focare Mould Co.,Ltd.

  • Regrind processing of injection molding

    I hate to see all this reiteration of suggestions on regrind, when it appears that no one is reading the information that is specific to this application. On his posting that is about a month ago and about post number 25, Vijay states he is using a GF-nylon in air vents, and they are painted. Is anyone trying to address his issue by reading what he needs, or are people just trying to gain ...


    By Aco Mold Manufacturing

  • Gas assisted chair mold solution

    Gas assisted molding is widely used in manufacturing hollow plastic parts, light weight but strong strength. Especially for chair mold, then how to manufacture good quality gas assisted chair mould? First the material used. Here are three solutions: 1. pure PP 2. PP plus ...


    By Focare Mould Co.,Ltd.

  • Genetic diversity for pink snow mold resistance in greens-type annual bluegrass

    Unseeded annual bluegrass (Poa annua L.) is an important component of golf greens in many regions of Canada and the United States. Although this turfgrass species has desirable playing attributes, it suffers from susceptibility to environmental and biological stresses including subfreezing temperatures and snow molds. In this study, we compared 29 genotypes collected from golf greens located in ...

  • METH: THE NEW MOLD - New Markets in Clandestine Laboratory Clean-up

    Untitled Document Intro Clandestine labs have become prevalent across America. They are used for the ...


    By EMSL Analytical, Inc.

  • Polymer Microinjection Molding Market By Application (Medical & Healthcare, Automotive, Telecom Fiber Optics, Micro Drive Systems & Control) to 2020

    The global market for microinjection polymer molding is expected to reach USD 897.3 million by 2020; according to a new study by Grand View Research, Inc. Growing demand for small sized components mainly from the medical industry is expected to be a key driving factor for the market. Microinjection molding is used to manufacture highly valued micro medical components such as sensors, implants, ...


  • How to choose the best laboratory for your microbiology analysis

    For indoor air quality professionals, choosing a good microbiology lab is one of the most important business decisions you can make. How do you know that the fungal data that you are receiving is accurate? Will it stand up in court? Has an educated, experienced, trained analyst actually thought about your sample and your project, understood what you were looking for, and then used their knowledge ...


    By EMLab P&K

  • On line analysis of organic in water case study

    Introduction On line chemical analysis has been developed significantly thanks to digital electronics' use of microprocessors together with the application of sophisticated and accurate analytical techniques. The result of this combination is readily available technology which allows for on line performance of almost any analytical determination for quality control which is ...


    By TOC Systems, Inc.

  • How To Choose The Best Laboratory For Your Microbiology Analysis

    For IAQ professionals, choosing a good lab is one of the most important business decisions you can make. How do you know that the fungal data that you are receiving is accurate? Will it stand up in court? Has an educated, experienced, trained analyst actually thought about your sample and your project, understood what you were looking for, and then used their knowledge to answer the question ...


  • Multi-residue mycotoxin analysis single run analysis of deoxynivalenol, aflatoxins, ochratoxin a, zearalenone and fumonisin by HPLC and post-column derivatization

    Although Aspergillus (Aflatoxins, Ochratoxin A) are generally associated with peanuts and Fusarium (Deoxynivalenol , Zearalenone) with wheat, these fungi and those that produce other toxins are not host selective and so can cross plant species. This situation is complicated by the fact that the microscopic mold may not be visible to the naked eye. Also, when infected grains are processed, any ...


    By Pickering Laboratories, Inc.

  • What's the most popular crate product in the market?

    Which is the most porpular crate product in the market?  There are many porpular shape of crate. We are talking with europe standard fruit crate, vergertable crate, milk crate, bread crate, and thinwall crate, folding crate, stackable crate, bulk crate containers, collapsible crate, europe pool crate, nestable crate ...


    By Focare Mould Co.,Ltd.

  • Solutions For Difficult Ejection

    Solutions For Difficult Ejection According to the above articles reason analysis, mainly we have following solutions for Difficult Ejection: 1)Shooting technique solutions * Avoid excessive melt injection. *Reduce injection pressure and dwell pressure, shorten dwell time. *Reduce injection rate and barrel temperature,optimize dimension of nozzle, runner and ...


    By Focare Mould Co.,Ltd.

  • Unfriendly cellar

    A client who had purchased a home noticed mold growing on furniture stored in their cellar as well as a musty smell when ever they were in the cellar. Investigation: The home is a sixty year old house nicely maintained and very clean with new paint and floor finishes on the inside. The heating system is a gas fired forced hot water system. There is no air conditioning. Relative humidity ...


    By Healthy Air Cape Cod

  • Safe House?

    A client who had lived in her house for more than ten years was concerned that her son who suffers from certain inflammation problems might be affected by poor air quality. Investigation: The home is a well maintained twenty year old two story house with a forced hot air heating system with same duct central air. The HVAC system incorporated a merv 6 air filter with an ultra violet ...


    By Healthy Air Cape Cod

  • Recycle plastic HDPE Crate Moulds

    According the appliance, usually we classify the plastic crate into following: Industry large plastic crates/box/container moulds Agriculture plastic crates moulds for vegetables,fruits, fish... Plastic ...


    By Focare Mould Co.,Ltd.

  • Fire Safety Assessment of Halogen-free Flame Retardant Polypropylene Based on Cone Calorimeter

    This study addresses the fire performance of polypropylene compounded with different flame retardants in the cone calorimeter tests and UL-94 burning tests. The parameters measured include heat release rate, time to ignition, smoke, and CO/CO2 yields, on the basis of which fire hazard analysis is carried out. By injection-molding different burn-rated polypropylene composites into television ...


    By SAGE Publications

  • Platinum Labware and It`s applications

    The Platinum is a metal extremely resistant to corrosion, high temperatures and attacks of acids. It's high resistance allows platinum and it's alloys to offer to the industry area a wide range of applications. It's used in the chemical, electrics, textile, glass, oil and mining industries, besides having it's alloys used in the manufacturing of cirurgic, optic and jewelry ...


    By Oregon Labware

  • Building Science Issue (Attic)

    Client: Upscale Custom Home Builder  Location: Florida Gulf Coast  Completion: Sept thru Oct 2007  Corrections Cost: ~$25,000 Key Project Team: Timothy Toburen Indoor Environmental Technologies (IET) was retained by the builder to determine the cause of excessive sweating ...

  • Time is of the essence in plastics

    Introduction Determining the moisture content in plastics is an important step in the extrusion and molding process of many industrial resins.  Excessive moisture content can lead to microscopic steam pockets that can blister or weaken the integrity of the molded product.  Plastic pellets in a saturated or ‘wet’ state can also mislead buyers of bulk plastic since ...


    By Arizona Instrument LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you