mold inspection Articles

  • Mold, Mold Growth and Buildings

    Concern about mold exposures in buildings continues to be a significant issue. The bottom line is that mold has been around for eons and is not going away.  It will grow whenever and wherever buildings get wet and materials suitable for mold growth are present.  The following paragraphs are meant to shed light on mold issues related to microbiology, health and safety, moisture control, ...

  • Why a Mold Inspection before Remediation is Always a Good Idea

    There are several important reasons why Indoor Environmental Technologies, Inc. (IET), and published industry standards, recommend that a mold inspection be performed by a separate company prior to starting mold remediation. In fact, many of the better remediation contractors in Florida will not start a remediation ...

  • Recycle Pallet Molding technology

    *Recycle Pallets Molds Design Analysis.When we received the customer Pallets design, we will gather all the related technical people to analysis the mold design first like demolding draft angle, strength, melt filling, deformation, thickness…and make mold flow analysis. After the design initially confirmed, we will have a technical meeting again to discuss all the plastic pallets molds ...


    By Focare Mould Co.,Ltd.

  • Beware of buying a home with MOLD!

    I have been performing home inspection for 18 years and I found that sellers will paint over existing water stains on walls to hide them from buyers. I do nondestructive moisture readings on all exterior walls in house, my meter will ring when there above normal moisture trapped in wall, when the meter rings I then proceed to investigate the exterior of house to find the cause of the moisture ...


  • Mold and the Re-use of Demolition Materials

    The presence of mold during construction, occupancy,or demolition of a building can have significant effects on a project’s cost, timing, and public perception. Mold is a type of fungus and is included in the same family as yeasts and mushrooms. Molds are naturally occurring microscopic organisms that are most often associated with damp, musty spaces like bathrooms, basements, and attics. Mold ...

  • Mold Remediation Guidance For Indoor Environment

    Remediation contractors are generally very conscientious, trying hard to bring each project to a condition where it will pass “clearance  testing” (the  Post-Remediation  Verification  [PRV] inspection) on the first try. Sometimes the cleaning attempts are unsuccessful. This will certainly cost the contractor additional cleaning ...

  • Familiar with the Symptoms of Mold and Ways to Deal

    Finding that you may have mold in your property can definitely lead you to experience numerous things. You could in the beginning feel uprising, irritation or possibly a feeling of getting overloaded. Putting the property available for sale may be the very first thing that jumps into the mind, but that ought to be a final resort. A lot of people, in fact, reside in a property with mold and don't ...


    By Executive Restoration

  • Controlling Mold Growth in Buildings Prevention and Control Strategies

      In background quantities, molds can be found everywhere-in air, water, our homes, our clothing and even on our pets. They are present in such small numbers that they don"t trigger reactions in humans, except in ultra-sensitive individuals. But, when molds find the right combination of ...

  • Top 7 Causes of Mold in Commercial Properties

    Mold growth within commercial buildings is a common concern for building occupants, as it has been linked to a number of health effects and can be found lurking within the walls and within ventilation systems, oftentimes going undetected for long periods of time. Here are the top seven causes of mold in commercial properties and what you need to know to prevent them. Improper Operation and ...


    By Karl & Associates Inc.

  • EPA SUPPORT EXPANDS ENVIRONMENTAL EDUCATION FOUNDATION MOLD & IAQ TRAINING AND COMMUNICATES A NEW SET OF STANDARDS TO MEDIATE THE MOLD CRISIS

    IAQ/Mold Professionals, Real Estate, Insurance and Financial Industries Reduces Risks from Mold and IAQ Exposure Insurance Carriers and Lenders Back New Mold/IAQ Standards Lack of Standards Now a “Non-Issue” as Industries Unite and Agree No one likes to talk about mold, yet it has quickly become a multibillion-dollar problem for mortgage banking companies, insurance companies, ...

  • IAQ UPDATE: Using an Infrared Camera to Detect Water and Mold Problems

    A low temperature range infrared camera is a very useful tool in detecting the presence of water or moisture that ultimately leads to mold growth. Infrared or thermal inspection does not directly identify the presence of mold, but it may be used to find moisture where mold may cultivate, especially behind wall board. But Beware!  I have seen many cases where the infrared camera results have ...


    By Atlantic Environmental, Inc.

  • Mold remediation resulting from Hurricane Katrina case study

    Service performed: Mold remediation Summary: To address water and mold damage incurred as result of Hurricane Katrina hitting the Mississippi coastal areas in 2005, EFI Global performed mold investigation, surveying, and remediation services at one of the nation’s leading facilities for the design, engineering, construction, and life cycle support of ...


    By EFI Global, Inc.

  • pipe fitting mold, irrigation piping system, irrigate fitting mould

    China pipe fitting mold, pipe fitting mould, mould, mold, moulds, molds, tool, plastic mould, plastic mold, injection mould, injection mold, pipe mould, pipe mold, fitting mould, fitting mold, PVC mold, PVC mould, PVC pipe mold, PVC pipe mould, PVC fitting mould, PVC fitting mold, PVC pipe fitting mold, PVC pipe fitting mould, PVC collapsible core, PVC ...


    By Focare Mould Co.,Ltd.

  • METH: THE NEW MOLD - New Markets in Clandestine Laboratory Clean-up

    Untitled Document Intro Clandestine labs have become prevalent across America. They are used for the ...


    By EMSL Analytical, Inc.

  • What`s In Your Christmas Tree?

    While bringing home that beatiful live Christmas tree may mark the beginning of the holiday season for many, the mold that thrives on its branches can trigger weeks of suffering for some. Live Christmas trees may bring more than the fresh pine scent of the holiday season into homes, according to a study by The American College of Allergy, ...


  • Thermal Patters Due to Moisture Accumulation within Exterior Walls

    In cold climates, air leakage is accompanied by moisture transport. When migrating through dew point temperatures, a considerable amount of moisture accumulation may occur depending on variables such as the duration of sub-zero exterior temperatures, building pressurization, wind effects and the level of interior relative humidity. Moisture accumulation may result in premature deterioration of ...

  • How healthy is your child’s school

    I was called recently by a concerned parent. His school was undergoing mold remediation during school hours. Also, the Shigella bacterium has closed several schools in the Birmingham area. Just how safe are your children in their school, and how can you help to ensure that they are in a safe environment? By being proactive and asking questions. The biggest problems regarding ...


    By DirectCIH

  • Plastics case study - Schmalbach-Lubeca

    Schmalbach-Lubeca operates 24 hours a day, 7 days a week, manufacturing millions of plastic bottles each day for the beverage industry. With a total of 63 plants worldwide, 17 locations are within the United States. The Blythewood, South Carolina location was using long radius elbows to convey PET Poly Pellets from the rail car to the silo, and from the silo to the molding operation. "Streamers" ...


    By HammerTek Corporation

  • UVC lights enhance IAQ, reduce AHU operating costs

    Southern California Air Conditioning Distributors (SCACD), the world's largest Carrier distributor, wanted to investigate additional indoor air quality (IAQ) improvement meth- ods in its 30-year-old administra- tive facility located here.  According to Bruce Fuhrmann, com mere iaf manager for SC ACD, he knew from visual inspections that there were typical accumulations of dirt and mold ...


    By E-CO

  • Development of Plans and Specifications and Bidding Assistance

    Asbestos Survey – Building Surveys and Testing ACC helps developing owners and supervisors meet their regulating specifications to test suppose components for asbestos fiber prior to remodelling or development activities. To ensure quality, our certified professionals perform all area work according to OSHA, EPA and AHERA methods. Following the asbestos fiber survey, ACC provides a complete ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you