mold removal Articles

  • Mold, Mold Growth and Buildings

    Concern about mold exposures in buildings continues to be a significant issue. The bottom line is that mold has been around for eons and is not going away.  It will grow whenever and wherever buildings get wet and materials suitable for mold growth are present.  The following paragraphs are meant to shed light on mold issues related to microbiology, health and safety, moisture control, ...

  • Cleaning mold containing surfaces

    Once a determination is made that a moldy surface can be cleaned instead of removed or demolished, what cleaning agents are effective in removing or killing the mold? Many factors influence the selection of a cleaning agent. 1). The type of surface to be cleaned: Is it porous? Hard such as cement or sheetrock? Soft, such as cloth, fabric or wallpaper? Absorbent and thick such as rugs, ...

  • Mold Prevention Training

    Mold –It’s All About Water! How is mold controlled on a construction project? By controlling water intrusion – that’s the answer! Mold has been around for a long time, and has always been a challenge on construction projects. However, with new construction materials being even more mold susceptible, and record-breaking lawsuits for exposure to mold growing, it is now more important than ever ...

  • After the flood - preventing mold

    Beyond the direct water damage from a flood, there can be short term and long term problems with mold growth, whether the building is commercial or residential. The source of the water is the first important issue. Consider the following: 1.) If the flood is from surface water flooding such as heavy rains, hurricanes, and overflowing rivers this means dirt and debris. This ...

  • Mold and chronic sinusitis

    Do you suffer from frequent sinus headaches, congestion and runny nose? Have you taken enough cold and allergy medication to qualify for “frequent flier” awards? You may not have a persistent cold or allergies. Researchers at the Mayo Clinic have discovered what may be the real cause of most chronic sinus conditions: MOLD! An estimated 37 million Americans suffer from chronic sinusitis, and the ...

  • Mold Remediation Guidance For Indoor Environment

    Remediation contractors are generally very conscientious, trying hard to bring each project to a condition where it will pass “clearance  testing” (the  Post-Remediation  Verification  [PRV] inspection) on the first try. Sometimes the cleaning attempts are unsuccessful. This will certainly cost the contractor additional cleaning ...

  • Black Mold Symptoms – Know the Enemy

    Black mold symptoms are nothing to play around with. Black mold can be extremely dangerous, and it can cause a wide range of symptoms, varying in severity. Some are easy to deal with and more of an annoyance than anything else. Others can be debilitating and potentially life threatening. If you think your home or business may have a black mold problem but can’t locate the source of it, you ...


    By EnviroVantage

  • PET Preform Injection Molding Machine

    PET preform injection molding Machine is suitable for mineral water, carbonic acid drink, juice, cooking oil, medicine jar and detergent, cosmetic, packing bottle and many others. Machine Features Special injection construction designed to benefit for ...


    By Focare Mould Co.,Ltd.

  • Where does mold come from?

    Molds are among the earliest known life-forms; they are found in all parts of the world, including Antarctica (“Scientists Tackle Antarctica Mold,” Peter Rejcek, editor, Antarctica Sun, February 4, 2007). They do not have mouths or digestive tracts. Instead, they release digestive enzymes that break down paper, fruits, leaves, shoe leather, bacon or anything else they have landed on ...

  • Mold Growth on Gypsum Wallboard—A Summary of Three Techniques

    Reducing occupant exposure to mold growing on damp gypsum wallboard and controlling mold contamination in the indoor environment was studied through 1) delineation of environmental conditions required to promote and avoid mold growth and 2) efficacy testing of antimicrobial products, specifically cleaners and paints, on gypsum wallboard (GWB) surfaces. The effects of moisture and relative ...

  • Controlling Mold Growth in Buildings Prevention and Control Strategies

      In background quantities, molds can be found everywhere-in air, water, our homes, our clothing and even on our pets. They are present in such small numbers that they don"t trigger reactions in humans, except in ultra-sensitive individuals. But, when molds find the right combination of ...

  • Indoor air quality and mold case study

    Service(s) performed: Indoor air quality and mold management services Summary: EFI Global has provided indoor air quality and asbestos abatement services to numerous school districts and universities nationwide. At a public educational system with 7 campuses totaling over 5 million square feet, our environmental professionals performed comprehensive indoor ...


    By EFI Global, Inc.

  • The case of the flooded carpet - aggressive action to prevent mold

    One of the worst sensations a homeowner can experience is the “squishy” sound and feel of walking on a flooded carpet. In most cases, a water–soaked carpet is a goner. This is especially so if the water came from a flooded stream or a massive storm. These waters carry silt, and possibly sewage from flooded septic systems or overflowing sewage treatment plants. Water that has ...

  • Top 7 Causes of Mold in Commercial Properties

    Mold growth within commercial buildings is a common concern for building occupants, as it has been linked to a number of health effects and can be found lurking within the walls and within ventilation systems, oftentimes going undetected for long periods of time. Here are the top seven causes of mold in commercial properties and what you need to know to prevent them. Improper Operation and ...


    By Karl & Associates Inc.

  • EPA SUPPORT EXPANDS ENVIRONMENTAL EDUCATION FOUNDATION MOLD & IAQ TRAINING AND COMMUNICATES A NEW SET OF STANDARDS TO MEDIATE THE MOLD CRISIS

    IAQ/Mold Professionals, Real Estate, Insurance and Financial Industries Reduces Risks from Mold and IAQ Exposure Insurance Carriers and Lenders Back New Mold/IAQ Standards Lack of Standards Now a “Non-Issue” as Industries Unite and Agree No one likes to talk about mold, yet it has quickly become a multibillion-dollar problem for mortgage banking companies, insurance companies, ...

  • Scale removal - Case Study

    Water Cooling Towers Operate at Better Efficiency and Lower Maintenance Costs with KDF Water Filter Media "As Seen in Water Quality Products" At TowerKlean™ LLC... KDF Water Filter Media Help with Scale, Algae, Chlorine and Heavy Metal Removal from Water Scale... it's a vicious never-ending problem that can kill the overall efficiency of water-cooling systems or ...


    By KDF Fluid Treatment, Inc.

  • Drying plastic resin pellets in injection- Molding & Extrusion processes case study

    Application Moisture concentrations are measured in the dry purge air used to remove moisture from a hopper containing plastic resin pellets used in injection-molding and extrusion processes. Problem Moisture contaminates the plastic resin pellets causing several quality problems in the finished plastic products. Moisture causes clear ...

  • METH: THE NEW MOLD - New Markets in Clandestine Laboratory Clean-up

    Untitled Document Intro Clandestine labs have become prevalent across America. They are used for the ...


    By EMSL Analytical, Inc.

  • Car Washing Equipment for Removing Dirt from Windows

    Dirt collects fast on windshields and windows, which is the reason why these car parts should be cleaned on a regular basis. The old mop-and-soap method is no longer effective. If you want to achieve sparkling clean windows, use commercial car wash machines to remove dust, pollution, water stains, bugs, and other dirt. Car windows are cleaned with two types of car wash machines. A steam vapor ...


    By Daimer Industries Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you