mold service Articles

  • Molds Design for Molding parts

    Mold Cavity Structural Design * Integral Cavity  Directly cut cavity in the mold base plate advantage is that the processing cost is relatively low, but the molding plate material for making the mold base is usually common medium carbon steel which is short in service life if used as cavity parts, while ...


    By Focare Mould Co.,Ltd.

  • Disposable Syringe Molds

    Focare Mould keep improve disposable syringe mold design and tooling process, thus to help our customer work out the highest production capacity disposable syringe molds and with longer life service time in shortes time.  For the disposable syringe molds, the key points is precision, high production capacity, long service ...


    By Focare Mould Co.,Ltd.

  • Gas-assisted injection Molding Advantages

    *Low injection pressure and locking force,thus reducing cost of equipments.Since gas-assisted injection adopts”underfeeding injection”,where in the thermoplastic filling of the mold cavity is accomplished under the pushing force of gas in the plastic melt, the injection pressure required is relatively lower and the locking force is also low(which can be reduced by 25%~90%),thereby ...


    By Focare Mould Co.,Ltd.

  • Mold Remediation Guidance For Indoor Environment

    Remediation contractors are generally very conscientious, trying hard to bring each project to a condition where it will pass “clearance  testing” (the  Post-Remediation  Verification  [PRV] inspection) on the first try. Sometimes the cleaning attempts are unsuccessful. This will certainly cost the contractor additional cleaning ...

  • Black Mold Symptoms – Know the Enemy

    Black mold symptoms are nothing to play around with. Black mold can be extremely dangerous, and it can cause a wide range of symptoms, varying in severity. Some are easy to deal with and more of an annoyance than anything else. Others can be debilitating and potentially life threatening. If you think your home or business may have a black mold problem but can’t locate the source of it, you ...


    By EnviroVantage

  • Indoor air quality and mold case study

    Service(s) performed: Indoor air quality and mold management services Summary: EFI Global has provided indoor air quality and asbestos abatement services to numerous school districts and universities nationwide. At a public educational system with 7 campuses totaling over 5 million square feet, our environmental professionals performed comprehensive indoor ...


    By EFI Global, Inc.

  • EPA SUPPORT EXPANDS ENVIRONMENTAL EDUCATION FOUNDATION MOLD & IAQ TRAINING AND COMMUNICATES A NEW SET OF STANDARDS TO MEDIATE THE MOLD CRISIS

    IAQ/Mold Professionals, Real Estate, Insurance and Financial Industries Reduces Risks from Mold and IAQ Exposure Insurance Carriers and Lenders Back New Mold/IAQ Standards Lack of Standards Now a “Non-Issue” as Industries Unite and Agree No one likes to talk about mold, yet it has quickly become a multibillion-dollar problem for mortgage banking companies, insurance companies, ...

  • Case study: Morrison brothers vibratory mold dump conveyor

    Challenge Morrison Bros. Foundry in Dubuque Iowa had been receiving reliable service from an existing General Kinematics Two-Mass Vibratory Shakeout. However, the vibratory mold dump conveyor prior to the vibratory shakeout was showing clear signs of being past the point of good service. The vibratory conveyor that had been installed by another company exhibited trough damage, ...


    By General Kinematics

  • Mold remediation resulting from Hurricane Katrina case study

    Service performed: Mold remediation Summary: To address water and mold damage incurred as result of Hurricane Katrina hitting the Mississippi coastal areas in 2005, EFI Global performed mold investigation, surveying, and remediation services at one of the nation’s leading facilities for the design, engineering, construction, and life cycle support of ...


    By EFI Global, Inc.

  • Insufficiently Filled solution - Plastic Injection Molding Defects Solution

    Plastic Molding Defects Solution For Insufficiently Filled: * Use plastics with low viscosity and sound fluidity or adjust prescription of plastics and reduce viscosity of melt. *Improve barrel temperature, increase injection pressure,raise melt temperature to reduce viscosity, and improve plastication quality. *Improve mold temperature and ...


    By Focare Mould Co.,Ltd.

  • The First China-made HPM injection molding machine is delivered to the U.S. customer

    The history of the first the HPM brand injection molding machines made in China will be supplied to a U.S. customer, which is headquartered in Kenton, Ohio Pleasant Precision Inc. company. This machine is assembled by Iraq Precision Machinery Co., Ltd. in Guangdong Foshan factory. HPM North America, Inc. is located in Marion, Ohio, is headed by the HPM veteran William Flickinger, the company will ...

  • METH: THE NEW MOLD - New Markets in Clandestine Laboratory Clean-up

    Untitled Document Intro Clandestine labs have become prevalent across America. They are used for the ...


    By EMSL Analytical, Inc.

  • Estimates of yield and economic losses associated with white mold of rain-fed dry bean in north dakota

    White mold [caused by Sclerotinia sclerotiorum (Lib.) de Bary] of dry bean (Phaseolus vulgaris L.) is the most important disease affecting rain-fed dry bean yields in North Dakota. The economic impact of this disease in North Dakota was assessed through a survey of 250 fields during 2003 to 2005. Profitability of a single fungicide application for managing white mold also was examined. Yield loss ...

  • Polymer Microinjection Molding Market By Application (Medical & Healthcare, Automotive, Telecom Fiber Optics, Micro Drive Systems & Control) to 2020

    The global market for microinjection polymer molding is expected to reach USD 897.3 million by 2020; according to a new study by Grand View Research, Inc. Growing demand for small sized components mainly from the medical industry is expected to be a key driving factor for the market. Microinjection molding is used to manufacture highly valued micro medical components such as sensors, implants, ...


  • Building Services Management - Air Sampling -

    Untitled Document Maintenance professionals are often the first responders to mold complaints in their facilities. building occupants can be exposed to fungal (mold) ...


    By EMSL Analytical, Inc.

  • Companies offering flood damage restoration services in Melbourne

    Almost every type of natural calamity is inevitable definitely where the not-so –fortunate people get impacted to extreme extents. Flood is one such calamity which can prove to be quite disastrous. Sometimes, there’re chances even though partial chances that your losses would be recovered. However, for the people affected, flood damage, restoration becomes of utmost ...


    By Masters Water Damage

  • How to Repair Pipes Quickly with Minimal Service Disruption

    If this has not yet happened to you, it will. The time is 5:30 a.m. and your guests are just beginning to wake when you get an emergency call informing you that a pipe has sprung a leak. What are your options? Will you shut down the water for a few hours, leaving your guests without water to brush their teeth, take their showers, or flush the commodes while you cut out and replace the bad ...


    By InduMar Products, Inc.

  • What's the most popular crate product in the market?

    Which is the most porpular crate product in the market?  There are many porpular shape of crate. We are talking with europe standard fruit crate, vergertable crate, milk crate, bread crate, and thinwall crate, folding crate, stackable crate, bulk crate containers, collapsible crate, europe pool crate, nestable crate ...


    By Focare Mould Co.,Ltd.

  • A moldy summer and the 3 H’S hot-humid-hurricanes

    A HOT WET SUMMER Once again, we’ve entered the hurricane season, when hot humid air envelops most of North America. Beginning in the Spring and lasting until the first frost of Autumn, the air is typically well above 60% Relative Humidity, which is ideal for promoting the growth of mold. The official Hurricane season runs from June to September, and even though they may not qualify as ...

  • Case Study: Major Southern California Studios

    Most studios require - and Ellis is pleased to provide - emergency response services, from mold testing, to indoor air, to asbestos removal. Most recently, Ellis managed a $40,000 cleanup of the air supply system of a huge filming stage, following a fire and resultant smoke damage. Other services provided since 1995 include numerous asbestos and lead surveys, abatement projects, soils testing, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you