monitoring instrument Articles | Environmental XPRT

Tekran instruments—monitoring around the world

Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...

Feb. 14, 2012

By Tekran Instruments Corporation

Understanding Geographical Instrumentation

Geographical instrumentation is one of the much heard terms especially in the field of building. Anywhere, where construction is carried out then services rendered for site examination plays an important role. It helps in identifying possible risks and also effectiveness present within the current site or structure. Designing of the Site The basic step which is carried out ...

Jun. 19, 2016

By Soldata Limited

U. S. Army Tests Water Monitoring Instruments for Deployed Troops

The Army conducted a competition, TRE 10-1JCBRAWM, from July 12to July 24, 2010 at the White Sands Missile Testing Grounds, New Mexico, for the best detector for radiation in water. The participants were Technical Associates with their SSS-22P liquid scintillation monitor; Canberra with their iSolo silicon sample counter; and Hidex from Finland with a liquid scintillation counter. The competition ...

Sep. 9, 2010

By Technical Associates

Instrumentation, methods & analysis tools for comprehensive condenser testing, monitoring & troubleshooting

Abstract Proper monitoring philosophy in combination with available, accurate and reliable instrumentation for comprehensive condenser performance testing, monitoring and troubleshooting is presented. Practical engineering guidance resulting from the use of advanced instrumentation with proven utility has contributed to the identification of new beneficial performance indicators. ...

May 11, 2009

By Intek, Inc.

Portable Monitoring Instruments Solve Flow Rate Mystery - Case Study

The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow. The Township started by video taping all of the lines ...

Jul. 30, 2012

By Greyline Instruments Inc.

TDLAS Gas Detection Instrumentation

PKL Technologies Inc. manufactures tunable diode laser (TDLAS) based gas detectors and monitors. Spectra-1 open path gas sensors are used in a variety of environmental and safety remote sensing applications. Spectra-1 gas sensors have been designed in a compact, easy to use, robust and portable format. Spectra-1 has been developed using proprietary hardware and software, to produce a low cost ...

Oct. 23, 2011

By PKL Technologies Inc.

Development of on-line instruments for monitoring of methane and NMTHC at PPB and PPM levels without matrix effects

Monitoring of methane and Non-Methane Total Hydrocarbons (NMTHC) is an important tool for process monitoring. In the microelectronics industry, the silicon substrates (wafers) are stored in containers, named FOUP (Front Opening Unified Pod) made in polymers (PC, PEEK, COP, PEI). Such materials are able to adsorb the Volatile Molecular Contaminants (VMC) and subsequently outgas these ones in ...

Aug. 7, 2018

By Chromatotec Group

Instrument air case study

Application Moisture is measured in instrument air to ensure that the air is properly dried. Problem Instrument air is used through-out a facility to protect delicate electronics, instruments, and to operate key process actuators. Many instruments also use instrument air to operate various pneumatic operators they might possess. Too frequently, there is ...

Nov. 23, 2014

By Ametek Process Instruments - THERMOX

Oxford instruments case study

Delivering operational efficiency Oxford Instruments specialises in the design, manufacture and support of high-technology tools and systems for industry, research, space, energy, defence and healthcare. Business needs Oxford Instruments needed to improve the management of Health & Safety acrossall locations. A gap analysis identified a number of key ...

Sep. 15, 2014

By Rivo, a Sphera Company

Teledyne Scientific Instruments - Direct Sampling MS and MS/MS for Real Time Air Monitoring

Presented at the 44th ASMS Conference on Mass Spectrometry, May 12-16, 1996 Portland, OR. Published in the Proceedings of the 44th ASMS Conference on Mass Spectrometry May 12-16, 1996 Portland, OR, in press. DIRECT SAMPLING MS AND MS/MS FOR REAL TIME AIR MONITORING C. Remigi, P.T. Palmer, Dept. of Chemistry & Biochemistry, SF State University, SF, CA ...

Jun. 27, 2007

By Environics, Inc.

Selection of Particulate Monitors

The installation and operation of continuous particulate emission monitors in industrial processes has become well developed and common practice in industrial stacks and ducts over the past 30 years reflecting regulatory monitoring requirements. It supports requirements originating from LAPPC (Local Air Pollution Prevention and Control), IPPC (Integrated Pollution Prevention and Control), WID ...

Jan. 19, 2011

By PCME Ltd - part of the Environnement S.A Group

Case study - Water accountability portable monitoring instruments solve flow rate mystery - Case Study

The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow. The Township started by video taping all of the lines ...

Sep. 8, 2011

By Greyline Instruments Inc.

Radiation Monitors and Meters

Light Description and Applications The light meter is a portable unit designed to measure visible, UV, and near-UV light in the workplace. (The CTC has a UV light meter available through its loan program, ALEP.) The light meter is capable of reading any optical unit of energy or power level if the appropriate detector has been calibrated with the meter. The spectral range of the instrument is ...

Dec. 31, 1998

By U.S. Department of Labor Occupational Safety & Health Administration (OSHA)

Oil on Water Monitoring

Northern Ireland Water operate a number of potable water plants around Lough Erne and the River Derg, these waterways are extremely popular with tourists and are used for pleasure crafts of various sizes, from jetskis to fully fitted 6 berth cruisers. These watercraft create an ongoing risk of floating oil from poorly maintained engines, as the watercraft have access to within 10 metres of the ...

Oct. 18, 2011

By Partech (Electronics) Ltd.

Noise Monitors and Meters

Sound level meters Description and ApplicationsThe sound level meter is a lightweight instrument for the measurement of sound pressure level (SPL) in decibels. All ANSI-approved meters meet minimum requirements that include an A-weighted network, a slow-response meter characteristic, and a fully graduated scale with measurements ranging from 80 to 130 dBA. The Type II meter is most frequently ...

Dec. 31, 1998

By U.S. Department of Labor Occupational Safety & Health Administration (OSHA)

Understanding Oil-in-Water Instrument Specifications

The measurement capabilities of oil-in-water analysis methods are described by several analytical figures-of-merit. Examples are: Range (Linear and Dynamic) Limit of Detection (LOD) Limit of Quantification (LOQ) Precision (Repeatability and Reproducibility) Sensitivity Accuracy Response Time Some or all of these are often specified by customers in the bid packages issued when selecting a ...

Jan. 17, 2011

By Turner Designs Hydrocarbon Instruments, Inc.

Florida utility uses Aqua TROLL® 200 instruments to Monitor aquifer storage and Recovery system - Case study

Aqua TROLL 200 tracks groundwater levels and water quality of injected and retrieved water Application Aquifer Storage and Recovery (ASR) systems can store large amounts of water deep underground and can reduce development of expensive surface reservoirs. Aquifer storage eliminates evaporative losses typical of surface water reservoirs and offers better protection from tampering. ASR ...

Dec. 31, 2011

By In-Situ, Inc.

Monitoring watershed health

Background Municipal water quality managers recognize the need for data that can be used to monitor and assess the impact of urbanization on the condition of natural watersheds. Storm events, in conjunction with the alteration of native landscape, building of roads and overuse of fertilizer, can contribute to excess nutrients, sediment and other pollutants in environmentally significant ...

May 5, 2010

By OTT HydroMet

Organics Monitoring (TOC)

Total organic carbon (TOC) testing is the traditional method for determining organic matter in water. However there is a far more practical, affordable and often more useful way to measure organic matter. UV absorbance testing (UVA) is rapidly becoming the preferred method of measuring organics even when the levels of organics being measured are very small. Organic Matter Organic ...

Aug. 23, 2016

By Real Tech Inc.

Emission Testing and Monitoring

Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1 | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein | Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

May 8, 2011

By Energy, Utility & Environment Conference (EUEC)

Subscribe to our eBulletins

Add Supplier Profile